DOWNLOAD Sharp HT-M700H Service Manual ↓ Size: 3.31 MB | Pages: 72 in PDF or view online for FREE

Model
HT-M700H
Pages
72
Size
3.31 MB
Type
PDF
Document
User Manual / Operation Manual
Brand
Device
Audio / Home Theatre
File
ht-m700h.pdf
Date

Sharp HT-M700H User Manual / Operation Manual ▷ View online

05/5/27
HT-M700H(E)2.fm
18
TINSEA065SJZZ
HT-M700H
Prepar
ation for 
Use
 
Connecting to a TV with a video input socket:
If your TV is equipped only with a video input socket (without
SCART), connect a video cable (not supplied) to enjoy images.
„
Connecting the AC power lead
After checking all the connections have been made correctly, plug
the AC power lead of this unit into the wall socket.
Note:
Unplug the AC power lead from the wall socket if the unit will not be
in use for a prolonged period of time.
 
„
To turn the power on
Press the ON/STAND-BY button.
If the power does not turn on, check if the AC power lead is plugged
in properly.
To set the unit to stand-by mode:
Press the ON/STAND-BY button again.
Set the video output mode to "S-Video". For the procedure, refer to 
"Changing the initial setting of DVD" on pages 53, 54.
Notes:
z
Change the TV input in accordance with the connected socket.
z
Do not connect other equipment (VCR, etc.) between the TV and 
the main unit. Images may be distorted.
z
Refer to the operation manual of the equipment to be connected.
z
Insert the plugs fully to avoid fuzzy pictures or noise.
TV
To video 
input socket
To video 
output socket
Video signal
Video cable 
(commercially available)
Wall socket
(AC 230 V, 50 Hz)
2
05/5/27
HT-M700H(E)2.fm
19
TINSEA065SJZZ
HT-M700H
Prepar
ation for 
Use
Remote control
„
Battery installation
 
Precautions for battery use:
z
Replace all old batteries with new ones at the same time.
z
Do not mix old and new batteries.
z
Remove the batteries if the unit is not to be used for long periods
of time. This will prevent potential damage due to battery leak-
age.
Caution:
z
Do not use rechargeable batteries (nickel-cadmium battery, etc.).
z
Installing the batteries incorrectly may cause the unit to malfunc-
tion.
Battery removal:
Remove the battery cover. Push each battery toward the   battery
terminal and take them out.
Notes concerning use:
z
Replace the batteries if the operating distance is reduced or if the
operation becomes erratic.
z
Periodically clean the transmitter on the remote control and the
sensor on the unit with a soft cloth.
z
Exposing the sensor on the unit to strong light may interfere with
operation. Change the lighting or the direction of the unit if this
occurs.
z
Keep the remote control away from moisture, heat, shock, and
vibrations.
 
„
Test of the remote control
Check the remote control after checking all the connections.
Point the remote control directly at the remote sensor on the unit.
The remote control can be used within the range shown below:
Press the ON/STAND-BY button. Does the power turn on? Now,
you can enjoy music.
Use 2 "AAA" size batteries (UM-4, R03, HP-16 or similar).
Batteries are not included.
1
Remove the battery cover.
2
Insert the batteries according to the direction indicated in
the battery compartment.
 
When inserting or removing the batteries, push them toward the 
 battery terminals.
3
Replace the cover.
0.2 m - 6 m
(8" - 20')
Remote sensor
05/5/27
HT-M700H(E)2.fm
20
TINSEA065SJZZ
HT-M700H
Prepar
ation for 
Use
General control  
„
Volume control
 
„
Muting
 
„
To change the display brightness (2 levels)
Hold the DISPLAY/(-DIMMER) button down for 3 seconds or more.
Each time you press, brightness changes.
Main unit operation:
When the VOLUME control is turned 
clockwise, the volume will increase. 
When it is turned anti-clockwise, the 
volume will decrease.
 
Remote control operation:
Press the VOL (+ or -) button to in-
crease or decrease the volume.
 
The volume is muted temporarily 
when pressing the MUTE button.
z
Press again to restore the vol-
ume.
z
The mute status is cancelled 
when you adjust the volume.
(*) After approx. 5 seconds of DVD playback, the display dims and 
the original brightness returns when you stop playback. The 
brightness remains unchanged during playback of other media.
0     1
10 ...
...
39     40 (MAXIMUM)
Dimmed
(*)  
Brightened
2
05/5/27
HT-M700H(E)3.fm
21
TINSEA065SJZZ
HT-M700H
DVD Operatio
n
Playing a disc  
Turn on the TV, and switch the input to the "VIDEO 1" or "VIDEO 2",
etc. accordingly.
  
  
  
  
  
  
  
1
Press the ON/STAND-BY button to turn the power on.
2
Press the   button to set the in-
put to "DVD".
3
Press the OPEN/CLOSE (PANEL OPEN/CLOSE  ) button
to open the front panel.
4
Press the   (DISC OPEN/CLOSE  ) button to open the disc
tray.
5
Place the disc on the disc tray, label side up.
Be sure to place 8 cm (3") discs in the middle of the disc posi-
tions.
6
Press the   (DISC OPEN/CLOSE  ) button to close the disc
tray.
Some discs play automatically.
DVD
VideoCD
CD
No Disc
Audio Visual
Entertainment 
12 cm (5")
8 cm (3")
Page of 72
Display

Click on the first or last page to see other HT-M700H service manuals if exist.