Sharp HT-CN500DVH User Manual / Operation Manual ▷ View online
E-46
HTCN400_500DVH_E.fm
03/7/2
HT-CN400DVH
ENGLISH
92LCN400E0270
F
S
V
I
N
P
E
D
HT-CN500DVH
Ad
v
a
nced
F
e
atures
- Ad
ju
st
in
g
sp
e
ake
r d
e
la
y t
ime
/sp
e
a
ker
le
vel
-
!
Test tone
You can check the sound output from the speakers.
Note:
When the listening mode is "STEREO", you can check the speaker sound of the front
speakers and the subwoofer.
speakers and the subwoofer.
!
Speaker level setting
If sounds from the speakers are uneven, you can equalise them by adjusting the
speaker levels.
speaker levels.
Notes:
"
The speaker type appears followed by "TREBLE", "BASS" and "MASTER VOL-
UME".
UME".
"
For details on "TREBLE" and "BASS", see page 22.
"
The volume can still be adjusted even after "MASTER VOLUME" disappears.
"
When the listening mode is "STEREO", you can change the level of the front
speakers and the subwoofer.
speakers and the subwoofer.
"
If subwoofer sound is distorted, lower the subwoofer level.
1
Press the ON/STAND-BY button to turn the power on.
2
Press the DVD button.
3
Press the SET UP button.
4
Press the or button to select
"SPEAKER SETUP" and then
press the ENTER button.
"SPEAKER SETUP" and then
press the ENTER button.
5
Press the or button to select
"TEST TONE".
"TEST TONE".
6
Press the button and use the
or button to select "ON".
or button to select "ON".
7
Press the ENTER button.
Speakers emit the test tone for 2 seconds in turn, starting with the front speaker
(left).
(left).
8
To end the test tone, press the SET UP button.
SETUP MENU -- MAIN PAGE
AUDIO SETUP
PREFERENCES
PREFERENCES
GENERAL SETUP
SPEAKER SETUP
-- SPEAKER SETUP PAGE --
REAR DELAY
MAIN PAGE
CNTR DELAY
OFF
ON
TEST TONE
-- SPEAKER SETUP PAGE --
REAR DELAY
MAIN PAGE
CNTR DELAY
OFF
ON
TEST TONE
Front speaker (left)
Front speaker (right)
Surround speaker (right)
Surround speaker (left)
Subwoofer
Centre speaker
1
Press the ON/STAND-BY button to turn the power on.
2
Press the DVD button.
3
Press the MODE button repeatedly to select the desired speaker.
4
Within 3 seconds, press the ADJ/
VOL + (VOL.UP +) or ADJ/VOL
(VOL.DOWN ) button to adjust
the level.
VOL + (VOL.UP +) or ADJ/VOL
(VOL.DOWN ) button to adjust
the level.
"
You can adjust the level at 1 dB intervals.
"
To adjust the levels of other speakers, repeat the operation from step 3.
Speaker type
Level range
Default
setting
FRONT LEFT
Front speaker (Left)
- 15 DB to + 10 DB
0 DB
CENTER
Centre speaker
- 15 DB to + 10 DB
0 DB
FRONT RIGHT
Front speaker (Right)
- 15 DB to + 10 DB
0 DB
REAR RIGHT
Surround speaker (Right)
- 15 DB to + 10 DB
0 DB
REAR LEFT
Surround speaker (Left)
- 15 DB to + 10 DB
0 DB
SUBWOOFER
Subwoofer
- 15 DB to + 10 DB
0 DB
CENTER 3DB
E-47
HTCN400_500DVH_E.fm
03/7/2
HT-CN400DVH
ENGLISH
92LCN400E0270
HT-CN500DVH
Ad
v
a
nced
F
e
atures
- Sle
e
p
op
e
ra
tion -
Sleep operation
!
Setting the sleep timer
You can set the unit to the power stand-by mode at the specified time.
To cancel the sleep operation:
Press the ON/STAND-BY button whilst "SLEEP" is indicated.
To cancel the sleep operation without setting the system to the stand-by mode, press
the SLEEP button until "OFF" appears on the display.
To cancel the sleep operation without setting the system to the stand-by mode, press
the SLEEP button until "OFF" appears on the display.
To confirm the remaining sleep time:
Press the SLEEP button whilst the sleep timer is set.
The remaining sleep time is displayed for about 3 seconds.
The remaining sleep time is displayed for about 3 seconds.
Caution:
This unit cannot set the sleep timer of other equipment.
To use the sleep timer using other equipment, you should also set the timer on
the equipment separately.
To use the sleep timer using other equipment, you should also set the timer on
the equipment separately.
PRESET
ADJ/VOL
9
8
7
6
5
4
0
>10
3
2
1
ENTER
SLEEP
ST/MO
TUNING
DISPLAY
LANGUAGE
MUTE
PROG
MENU/PBC
NTSC/PAL
STEP
A-B
REPEAT
ANGLE
DIRECT
LISTENING
SLOW/MEMORY
TITLE
ZOOM
AUDIO
RETURN
MODE
SUBTITLE
SET UP
OPEN/
CLOSE
ON/
STAND-BY
SLEEP
ON/
STAND-BY
1
Play back the desired sound source.
2
Press the SLEEP button.
To change the sleep time:
Press the SLEEP button repeatedly to select the desired sleep time. The time will
decrease as follows.
decrease as follows.
3
Your system will enter the power stand-by mode automatically af-
ter the preset time has elapsed.
ter the preset time has elapsed.
A - B
REPEAT 1
PROG
CHP
PRESET
TRK
TITLE
KHz
MHz
CD MP3
STEREO V
DIGITAL
Pro Logic
Pro Logic
SLEEP
SLEEP
120 MIN
OFF
90 MIN
60 MIN
15 MIN
30 MIN
45 MIN
E-48
HTCN400_500DVH_E.fm
03/7/2
HT-CN400DVH
ENGLISH
92LCN400E0270
F
S
V
I
N
P
E
D
HT-CN500DVH
Re
fe
re
nc
es
- Er
ro
r indic
a
to
rs
a
nd wa
rn
ings
-
Error indicators and warnings
When you load an unplayable disc or fail to perform operations properly, the following
messages are displayed on the unit and the TV screen.
messages are displayed on the unit and the TV screen.
Unit display
Meaning
"
The disc is not loaded.
"
The disc is scratched or dirty and cannot be recogn-
ised.
ised.
"
The disc is loaded up-side down.
"
The region number of the DVD is not 2 or ALL.
TITLE
CHP
A - B
REPEAT 1
SLEEP
PROG
PRESET
TRK
KHz
MHz
TITLE
CHP
A - B
REPEAT 1
SLEEP
PROG
PRESET
TRK
KHz
MHz
TV screen
Meaning
"
The disc is not loaded.
"
The disc is scratched or dirty and cannot be
recognised.
recognised.
"
The disc is loaded up-side down.
"
The region number of the DVD is not 2 or
ALL.
ALL.
NO DISC
WRONG CODE
E-49
HTCN400_500DVH_E.fm
03/7/2
HT-CN400DVH
ENGLISH
92LCN400E0270
HT-CN500DVH
Re
fe
re
nc
es
- T
roub
le
s
h
ooting c
h
a
rt -
Troubleshooting chart
Many potential problems can be resolved by the owner without calling a service tech-
nician.
If something is wrong with this product, check the following before calling your autho-
rised SHARP dealer or service centre.
nician.
If something is wrong with this product, check the following before calling your autho-
rised SHARP dealer or service centre.
!
General
!
DVD player
Symptom
Possible cause
Reference
page
No sound is heard.
"
Is the volume level set to "0"?
P. 22
"
Are the headphones connected?
P. 22
"
Are the speaker wires disconnect-
ed?
ed?
P. 11
The sounds from speakers
are not well balanced.
are not well balanced.
"
Are the speaker leads connected to
the wrong channels?
the wrong channels?
P. 11
"
Is each speaker placed at the same
distance from the listener?
distance from the listener?
P. 15
"
Are speakers adjusted to the same
level?
level?
P. 46
Noise is heard during play-
back.
back.
"
Move the unit away from any com-
puters or mobile phones.
puters or mobile phones.
When a button is pressed,
the unit does not respond.
the unit does not respond.
"
Set this unit to the power stand-by
mode and then turn it back on.
mode and then turn it back on.
P. 50
Interference or noise occurs
on the TV image.
on the TV image.
"
Is the unit placed near TV with inter-
nal aerial? Use an external aerial.
nal aerial? Use an external aerial.
P. 12
The power is not turned on.
"
Is the unit unplugged?
P. 14
"
The protection circuit may be acti-
vated. Unplug and plug in the power
lead again after 15 minutes or more.
vated. Unplug and plug in the power
lead again after 15 minutes or more.
P. 50
No images are displayed.
"
Is TV turned on?
P. 17
"
Is the input of TV switched?
P. 17
Symptom
Possible cause
Reference
page
Even though a disc has been
loaded, "NO DISC" is dis-
played.
loaded, "NO DISC" is dis-
played.
"
Is the disc loaded upside down?
"
Is the disc very dirty?
Playback sounds are
skipped.
skipped.
"
Does the disc satisfy the standards?
"
Is the unit located near excessive vi-
brations?
brations?
"
Has condensation formed inside the
unit?
unit?
P. 50
The control buttons do not
function. Music or video play-
back is interrupted.
function. Music or video play-
back is interrupted.
"
Is the disc very dirty?
"
Does the disc satisfy the standards?
"
Is the unit located near excessive vi-
brations?
brations?
"
Has condensation formed inside the
unit?
unit?
P. 50
Pictures and sound are
skipped.
skipped.
"
Is the disc very dirty?
"
Is the unit located near excessive vi-
brations?
brations?
"
Has condensation formed inside the
unit?
unit?
P. 50
The unit does not operate
even if the power is on.
even if the power is on.
"
Is a disc other than a DVD (region
number 2 or ALL), SVCD, VCD, au-
dio CD, CD-R or CD-RW loaded?
number 2 or ALL), SVCD, VCD, au-
dio CD, CD-R or CD-RW loaded?
P. 5
Image cannot be played
back. (Sound is not heard.)
back. (Sound is not heard.)
"
Are the video and audio cables con-
nected improperly?
nected improperly?
P. 13 - 14
"
Is a disc other than a DVD (region
number 2 or ALL), SVCD, VCD, au-
dio CD, CD-R or CD-RW loaded?
number 2 or ALL), SVCD, VCD, au-
dio CD, CD-R or CD-RW loaded?
P. 5
"
Is the disc very dirty?
"
Is the disc loaded upside down?
"
Clean the optical pickup if it is dirty.
"
Is the TV input set to "VIDEO 1/VID-
EO 2", etc.?
EO 2", etc.?
P. 23
"
Is the unit turned on?
P. 16
Click on the first or last page to see other HT-CN500DVH service manuals if exist.