DOWNLOAD Sharp GX-M10H (serv.man2) Service Manual ↓ Size: 9.21 MB | Pages: 28 in PDF or view online for FREE

To play back MP3/WMA (Windows Media Audio) fi le
There are many music sites on the internet that you can download 
MP3/WMA (Windows Media Audio) music fi les. Follow the 
instructions from the website on how to download the music fi les. 
You can then play back these downloaded music fi les by burning 
them to a CD-R/RW disc.

  Your downloaded song/fi les are for personal use only. Any other 

usage of the song without owner’s permission, is against the 
law.

If MP3/WMA fi les are recorded in several folders, a folder number 
will be set to each folder automatically.
These folders can be selected by the FOLDER button on the 
remote control. If there is no supported fi le formats inside the 
selected folder, the folder is skipped and the next folder will be 
selected.
Example: How to set folder number if MP3/WMA format fi les are 
recorded as below fi gure.
1  ROOT folder is set as folder 1.
2  As for folders inside ROOT folder (Folder A and Folder B), the 

folder which is recorded earlier on the disc will be set as folder 
2 and folder 6.

3  As for folder inside Folder A (Folder C and Folder D), the folder 

which is recorded earlier on the disc will be set as folder 3 and 
folder 4.

4  Folder E that is inside Folder D will be set as folder 5.

  The folder and fi le order information which is recorded on the 

disc depends on the writing software. There maybe possibilities 
that this unit will playback the fi les not according to our expected 
playback order.

  For CD MP3/WMA, 999 numbers of folders and fi les inclusive of 

the folders which have non playable fi les can be read.

  Folder mode on/off can be operated by the FOLDER button on 

the remote control. Files that are played when folder mode is 
set to the on position, may differ from those played back when 
folder mode is turned off.

ROOT
(FOLDER 1) 

FOLDER A
(FOLDER 2)

FOLDER B
(FOLDER 6)

FILE 7
FILE 8

FILE 1
FILE 2
FILE 3

FILE 4
FILE 5
FILE 6
FOLDER E
(FOLDER 5)

FOLDER C
(FOLDER 3)

FOLDER D
(FOLDER 4)

FILE 9
FILE 10

To play back CD-R/RW.

1  Press the CD  /  button, and load an MP3/WMA disc. Press the 

FOLDER button and disc info will be displayed.

2  Press the TUNING (  or  ) button to select desired playback 

folder. (Folder mode on)

3  Select desired fi le to be played back by pressing the 

 or 

 button.

4  Press the CD  /  button. Playback will start and fi le name will 

be displayed.

 

 Title, Artist and Album name are displayed if they are 

recorded on the disc.

 

 In case of playback with the folder mode on, press the 

TUNING (  or  ) button, and the folder can be selected 
even though it is in playback/pause mode. It will continue 
playback/pause mode in the 1st track of the selected folder.

 

  Display content can be changed by pressing the  DISPLAY 

button.

File name display

Folder display

Counter display

Album display

Artist display

Title display

Note:
If “NOTSUPRT” is displayed, it means “Copyright protected WMA 
fi le” or “Not supported playback fi le” is selected.

GX-M10H_OM_UK_OK_JU.indd   Sek1:12

GX-M10H_OM_UK_OK_JU.indd   Sek1:12

2012-08-14   23:23:50

2012-08-14   23:23:50

Caution:
At USB mode, once the iPod or iPhone is docked onto the unit, 
the iPod or iPhone will automatically start charging. ‘iPod DOCK 
CHARGE MODE’ will be displayed. In order to listen to any USB 
mass storage device / MP3 player, the iPod or iPhone must be 
removed from the docking station.

Note:
This product is not compatible with MTP and AAC fi le  systems 
from USB mass storage device or MP3 player.

1  Press the USB  /  button on the remote control or the main unit 

to select USB function. Connect the USB memory device that 
has MP3/WMA format fi les on the unit. When the USB memory 
is connected to the main unit, the device information will be 
displayed.

2  Select desired fi le to be played back by pressing the 

 or 

 button.

3  Press the USB  /  button. Playback will start and the fi le name 

will be displayed.

 

 Title, Artist and Album name are displayed if they are 

recorded in the USB memory device.

 

  Display content can be changed by pressing the DISPLAY 

button.

Note:
To pause playback:
Press the USB  /  button.

1  Press the USB  /  button on the remote control or the main unit 

to select USB function. Connect the USB memory device that 
has MP3/WMA format fi les on the unit. When the USB memory 
is connected to the main unit, the device information will be 
displayed.

2  Press the FOLDER button, and press the TUNING (  or  ) 

button to select desired playback folder. To start playback with 
folder mode on, go to step 4. To change the playback folder, 
press the TUNING (  or  ) button to select another folder.

3  Select desired fi le to be played back by pressing the 

 or 

 button.

4  Press the USB / button. Playback will start and the fi le  name 

will be displayed.

 

 Title, Artist and Album name are displayed if they are 

recorded in the USB memory device.

 

  Display content can be changed by pressing the DISPLAY 

button.

1  Press the DEMO/(DIMMER)/  ( ) button to stop playback.
2  Disconnect USB memory device from the USB terminal.

  SHARP will not be held liable for the loss of data whilst the USB 

memory device is connected to the audio system.

  Files compressed in MP3 and/or WMA format can be played 

back when connected to the USB terminal.

  This USB memory’s format supports FAT 16 or FAT 32.
  SHARP cannot guarantee that all USB memory devices will 

work on this audio system.

  USB cable is not recommended for use in this audio system to 

connect to USB memory device. Use of the USB cable will affect 
the performance of this audio system. iPod, iPhone and iPad is 
not prone to this condition.

  This USB memory cannot be operated via USB hub.
  The USB terminal in this unit is not intended for a PC connection 

but is used for music streaming with a USB memory device.

  External HDD-storage cannot be played back via USB 

terminal.

  If the data inside the USB memory is large, it may take longer 

time for the data to be read.

  This product can play WMA and MP3 fi les. It will automatically 

detect the fi le type being played. If unplayable fi le is played 
on this product, “NOTSUPRT” is indicated and the fi le will be 
automatically skipped. This will take a few seconds. If abnormal 
indications appear on the display due to the unspecifi ed fi le, turn 
off the unit and then turn it on again.

  This product relates to USB mass storage devices and MP3 

players. It may however face some irregularities due to various 
unforeseen reasons from some devices. Should this happen, 
turn off the unit and then turn it on again.

  During CD function, MP3 player will not be charging.

GX-M10H_OM_UK_OK_JU.indd   Sek1:13

GX-M10H_OM_UK_OK_JU.indd   Sek1:13

2012-08-14   23:23:50

2012-08-14   23:23:50

Note:
If USB memory device is not connected, “NO MEDIA” will be 
shown on the display.

  This unit only supports “MPEG-1 Audio Layer-3” format. 

(Sampling Frequency is 32, 44.1, 48kHz)

  Playback order for MP3 fi les may differ depending on the writing 

software used during fi le download.

  Bitrate which is supported by MP3 is 32~320 kbps, WMA is 

64~160 kbps.

  For MP3/WMA fi les, please put “.MP3” “.WMA” extension. Files 

cannot be played back if there is no MP3/WMA extension.

  Playlists are not supported on this unit.
  This unit can display Folder Name or File Name up to 32 

characters.

  Maximum total number of MP3/WMA fi les is 65025. 
  Total number of folders read is 999 including folder with non-

playable fi le. However, the display shows only folder with MP3 
fi les. 

  The display playback time may not be displayed correctly when 

playing back a variable bitrate fi le.

  The ID3TAG information supported are TITLE, ARTIST and 

ALBUM only. Title name, artist name and album name can be 
displayed by pressing the DISPLAY button during fi le playback 
or pause mode.

  WMA meta tag also supports title, artist and album name which 

are recorded in WMA fi les. Copyright protected WMA fi les 
cannot be played back.

Note:
This product can receive FM stereo and FM monoaural 
brodcasts.

1  Press the ON/STAND-BY button to turn the power on.
2  Press the TUNER button on the remote control or TUNER/

AUDIO IN button on the main unit repeatedly to select FM 
Stereo or FM Mono.

3  Press the TUNING (  or  ) button on the remote control to tune 

in to the desired station.

 

  Manual tuning:

    Press the TUNING (  or  ) button repeatedly to tune in to 

the desired station.

 

   

When the TUNING (  or  ) button is pressed for more than 
0.5 seconds, scanning will start automatically and the tuner 
will stop at the fi rst receivable broadcast station.

  When radio interference occurs, auto scan tuning may stop 

automatically at that point.

  Auto scan tuning will skip weak signal stations.
  To stop the auto tuning, press the TUNING (  or  ) button 

again.

  When an RDS (Radio Data System) station is tuned in, the 

frequency will be displayed fi rst, and then the RDS indicator will 
light up. Finally, the station name will appear.

  Full auto tuning can be achieved for RDS stations “ASPM”, see 

page 16.

  Press the TUNER button to select stereo mode and “ST” 

indicator will be displayed. “

” will appear when an FM 

broadcast is in stereo.

  If the FM reception is weak, press the TUNER button to extinguish 

the “ST” indicator. The reception changes to monaural, and the 
sound becomes clearer.

GX-M10H_OM_UK_OK_JU.indd   Sek1:14

GX-M10H_OM_UK_OK_JU.indd   Sek1:14

2012-08-14   23:23:51

2012-08-14   23:23:51

You can store 40 FM stations in memory and recall them at the 
push of a button. (Preset tuning)

1  Perform steps 1 - 3 in “Tuning”.
2  Press the MEMORY button.
3  Within 30 seconds, press the PRESET (  or  ) button to select 

the preset channel number. Store the stations in memory, in 
order, starting with preset channel 1.

4  Within 30 seconds, press the MEMORY button to store that 

station in memory. If the “MEM” indicator and preset number 
disappear before the station is memorised, repeat the operation 
from step 2.

5  Repeat steps 1 - 4 to set other stations, or to change a preset 

station. When a new station is stored in the memory, the station 
previously memorised for that preset channel number will be 
erased.

Note:
The backup function protects the memorised stations for a few 
days should there be a power failure or the AC power lead become 
disconnected.

1  Press the PRESET (  or  ) button for less than 0.5 seconds to 

select the desired station.

The stations saved in the memory can be scanned automatically. 
(Preset memory scan)

1  Press the PRESET (  or  ) button for more than 0.5 seconds. 

The preset number will fl ash and the programmed stations will 
be tuned in sequentially, for 5 seconds each.

2  Press the PRESET (  or  ) button again when the desired 

station is located.

1  Press the ON/STAND-BY button to enter the stand-by mode.
2  Whilst pressing down the PRESET 

 button, press the ON/

STAND-BY button until “TUNCLEAR” appears.

RDS is a broadcasting service which a growing number of FM 
stations provide. These FM stations send additional signals 
along with their regular programme signals. They send their 
station names, and information about the type of programme 
such as sport, music, etc.
When tuned to an RDS station, “RDS” and the station name will 
be displayed.
“TP” (Traffi c Programme) will appear on the display when the 
received broadcast carries traffi c information, and “TA” (Traffi c 
Announcement) will appear whilst a traffi c information is on air.
“PTYI” (Dynamic PTY Indicator) will appear whilst the Dynamic 
PTY station is received.

Station name (PS)

Programme type (PTY)

Frequency

Radio text (RT)

When tuning in to a station other than an RDS station or to an 
RDS station which sends weak signal, the display will change in 
the following order:

NO PS

NO PTY

   98.80 MHz

NO RT

GX-M10H_OM_UK_OK_JU.indd   Sek1:15

GX-M10H_OM_UK_OK_JU.indd   Sek1:15

2012-08-14   23:23:54

2012-08-14   23:23:54