Sharp FV-DB2ES User Manual / Operation Manual ▷ View online
21
FV-DB2E
05/4/21
FVDB2E_UK.fm
TINSEA048SJZZ
A
d
v
a
n
ced Fea
tures
Enhancing your system
"
Connecting to a stereo system, etc.
You can enjoy the sound through a stereo system by connecting to
the unit with an audio cable.
the unit with an audio cable.
Notes:
!
Plug in each cable fully to prevent noise interference.
!
Refer to the manual for the connected equipment.
!
The unit produces both DAB and FM sound.
"
Headphones
!
Before plugging in or unplugging the headphones, reduce the vol-
ume.
ume.
!
Be sure your headphones have a 3.5 mm (1/8") diameter plug
and impedance between 16 and 50 ohms. The recommended
impedance is 32 ohms.
and impedance between 16 and 50 ohms. The recommended
impedance is 32 ohms.
!
Plugging in the headphones disconnects the speakers automati-
cally. Adjust the volume using the volume control.
cally. Adjust the volume using the volume control.
Turn off all other equipment before making this connection.
Stereo system, etc.
Headphones
To audio input
sockets
sockets
Audio cable
(commercially available)
5
22
FV-DB2E
05/4/21
FVDB2E_UK.fm
TINSEA048SJZZ
Re
fe
re
nces
Troubleshooting chart
Many potential problems can be resolved by the owner without call-
ing a service technician.
If something is wrong with this product, check the following before
calling your authorised SHARP dealer or service centre.
ing a service technician.
If something is wrong with this product, check the following before
calling your authorised SHARP dealer or service centre.
"
If trouble occurs
When this product is subjected to strong external interference
(mechanical shock, excessive static electricity, abnormal supply
voltage due to lightning, etc.) or if it is operated incorrectly, it may
malfunction.
(mechanical shock, excessive static electricity, abnormal supply
voltage due to lightning, etc.) or if it is operated incorrectly, it may
malfunction.
If such a problem occurs, do the following:
Caution:
This operation will erase all data stored in memory including clock,
alarm settings, tuner preset, and station list, etc.
This operation will erase all data stored in memory including clock,
alarm settings, tuner preset, and station list, etc.
"
Clearing all the memory (reset)
Caution:
This operation will erase all data stored in memory including clock,
alarm settings, tuner preset, and station list, etc.
This operation will erase all data stored in memory including clock,
alarm settings, tuner preset, and station list, etc.
Symptom
Possible cause
When a button is
pressed, the unit
does not re-
spond.
pressed, the unit
does not re-
spond.
!
Set the unit to the power stand-by mode and
then turn it back on.
then turn it back on.
!
If the unit still malfunctions, reset it.
No sound is
heard.
heard.
!
Is the volume level set to "0"?
!
Are the headphones connected?
DAB channels
cannot be re-
ceived.
cannot be re-
ceived.
!
Signal reception is poor. Adjust the aerial di-
rection (see page 8).
rection (see page 8).
!
Move the unit to another room or near the
window, then tune in manually (see page
10).
window, then tune in manually (see page
10).
Sound from DAB
channels is inter-
rupted or distort-
ed.
channels is inter-
rupted or distort-
ed.
!
Is the unit placed near the TV or computer?
!
Move the unit to another room or near the
window, then tune in manually (see page
10).
window, then tune in manually (see page
10).
!
Are the main batteries dead?
Secondary ser-
vices cannot be
received.
vices cannot be
received.
!
Some DAB channels do not offer secondary
services. " " appears the station name when
secondary services are available (see page
10).
services. " " appears the station name when
secondary services are available (see page
10).
The alarm does
not start at the set
time. Or " " is
flashing.
not start at the set
time. Or " " is
flashing.
!
Is the AC adaptor of the unit plugged in?
!
Did a power failure occur? Receive a DAB
station to set date and time (see page 9).
station to set date and time (see page 9).
The unit does not
store stations, or
the clock does
not keep time.
store stations, or
the clock does
not keep time.
!
Are the memory batteries dead?
!
Is the memory battery polarity correct?
1
Set the unit to the stand-by mode and turn the power on again.
2
If the unit is not restored in the previous operation, unplug and
plug in the AC adaptor from the wall socket and replace the main
batteries, memory batteries and then turn the power on.
plug in the AC adaptor from the wall socket and replace the main
batteries, memory batteries and then turn the power on.
1
Press the ON/STAND-BY button to enter the stand-by mode.
2
Whilst pressing down the MENU button and the PRESET 4 but-
ton, press the ON/STAND-BY button until "All clear ok?" appears.
ton, press the ON/STAND-BY button until "All clear ok?" appears.
3
Within 30 seconds, press the ENTER button.
"Complete" appears and the memory is cleared.
23
FV-DB2E
05/4/21
FVDB2E_UK.fm
TINSEA048SJZZ
Re
fe
re
nces
Maintenance
"
Cleaning the cabinet
Periodically wipe the cabinet with a soft cloth and a diluted soap
solution, then with a dry cloth.
solution, then with a dry cloth.
Caution:
!
Do not use chemicals for cleaning (petrol, paint thinner, etc.). It
may damage the cabinet finish.
may damage the cabinet finish.
!
Do not apply oil to the inside of unit as this may cause malfunc-
tions.
tions.
"
Condensation
When condensation is formed, the unit may not function properly.
Condensation may form in the following cases:
!
Shortly after turning on a heater.
!
When the unit is placed in a room where there is excessive steam
or moisture.
or moisture.
!
When the unit is moved from a cool place to a warm place.
To remove condensation:
Leave the unit for approximately 1 hour. The condensation should
evaporate and the unit will work properly.
Leave the unit for approximately 1 hour. The condensation should
evaporate and the unit will work properly.
Specifications
As part of our policy of continuous improvement, SHARP reserves
the right to make design and specification changes for product
improvement without prior notice. The performance specification fig-
ures indicated are nominal values of production units. There may be
some deviations from these values in individual units.
the right to make design and specification changes for product
improvement without prior notice. The performance specification fig-
ures indicated are nominal values of production units. There may be
some deviations from these values in individual units.
"
General
"
Radio
Type
DAB receiver
Power source
DC 9 V: AC adaptor (AC 230 - 240 V, 50 Hz)
DC 9 V: "C" size (LR14) alkaline battery 6
as main batteries
as main batteries
DC 3 V: "AA" size (UM/SUM-3, R6, or HP-7)
battery 2 as memory batteries
battery 2 as memory batteries
Power
consumption
consumption
11 W (AC adaptor)
7 W (DC, batteries)
Output power
RMS: 4 W (2 W + 2 W) (10 % T.H.D.)
Speaker
8 cm full-range speaker
Output terminals
Headphones:
3.5 mm stereo mini plug type 1
16 - 50 ohms (recommended: 32 ohms)
3.5 mm stereo mini plug type 1
16 - 50 ohms (recommended: 32 ohms)
Line output (audio signal):
3.5 mm stereo mini plug type 1
2 V/10 k ohms at DAB 0 dB
3.5 mm stereo mini plug type 1
2 V/10 k ohms at DAB 0 dB
Dimensions
Width: 320 mm
Height: 135 mm
Depth: 100 mm
Height: 135 mm
Depth: 100 mm
Weight
1.7 kg (without batteries)
Frequency range
DAB: 174 - 240 MHz
FM: 87.5 - 108 MHz
6
TERMS OF GUARANTEE
Sharp Electronics (UK) Ltd. (“Sharp”) guarantees to provide for the repair, or at its option the replace-
ment, of this product subject to the conditions listed below:-
ment, of this product subject to the conditions listed below:-
1. This guarantee shall only apply to faults which are due to inferior workmanship or materials. It does
not cover faults or damage caused by accident, misuse, fair wear and tear, neglect, tampering with
the product, or repair other than by a Service Facility appointed by Sharp.
the product, or repair other than by a Service Facility appointed by Sharp.
2. As this product is intended for private domestic use only, the guarantee will not apply if the product
is used in the course of a business, trade or profession.
3. To benefit from this guarantee, any fault which occurs must be notified to Sharp, or its appointed
Service Facility within one year from the date this product was purchased. Proof of purchase must
be provided.
be provided.
4. The guarantee does not cover carriage costs, audio tapes, compact discs or batteries.
5. In the unlikely event of this product requiring repair, please contact the supplier from whom it was
purchased. Where this is not possible, please contact the Sharp Customer Information Centre on
the telephone number given below.
the telephone number given below.
6. No person has any authority to vary the terms or conditions of this guarantee.
7. This guarantee is offered as an additional benefit to your statutory rights, and does not affect these
rights in any way.
If you have any difficulty operating this product, or would like information on other Sharp products,
please telephone the Sharp Customer Information Centre on the number given below.
please telephone the Sharp Customer Information Centre on the number given below.
Sharp Customer Information Centre - Telephone 08705 274277
(or (01) 676 0648 if telephoning from Ireland)
0310
05/4/21
FVDB2E_UK_BACK.fm
TINSEA048SJZZ
SHARP ELECTRONICS (U.K.) LTD.
Sharp House, Thorp Road, Newton Heath, Manchester, M40 5BE
SHARP CORPORATION
0401_A5
TINSEA048SJZZ
05D N YT 1
05D N YT 1
