Sharp FV-DB1E (serv.man2) User Manual / Operation Manual ▷ View online
9
FV-DB1E
04/4/12
FV-DB1E_1.fm
TINSEA025SJZZ
D
AB (Digi
tal A
udio
Br
oa
dcasting
) Operati
o
n
"
Retuning the unit (Auto tune)
You can retune the radio when you move the unit to other areas or
add multiplex channels to the station list.
There are two Auto tune options available.
add multiplex channels to the station list.
There are two Auto tune options available.
After the scan:
The unit will return to the station you were listening to and you will
hear it through the speaker. All the stations found are now stored in
the unit.
The unit will return to the station you were listening to and you will
hear it through the speaker. All the stations found are now stored in
the unit.
"
Selecting a station in the station list
Once a DAB station is received, you can select stations in the sta-
tion list.
tion list.
Note:
Inactive stations cannot be received by Auto tune ("Not available"
appears). Tune in manually by adjusting the aerial direction (see
page 10).
Inactive stations cannot be received by Auto tune ("Not available"
appears). Tune in manually by adjusting the aerial direction (see
page 10).
Autotune UK: All frequencies are scanned in the UK channel allo-
cation. This may take a few seconds.
Autotune Full: The full range of digital frequencies is scanned in
Band III. This may take a minute or more.
1
Press the BAND button until "DAB" ap-
pears on the display.
pears on the display.
2
Autotune UK:
Press the AUTO TUNE button for less
than 1 second.
than 1 second.
Autotune Full:
Hold down the AUTO TUNE button for 2
seconds or more.
seconds or more.
You can cancel the Auto tune by pressing the AUTO TUNE but-
ton again.
ton again.
1
Press the BAND button until "DAB" appears on the display.
2
Whilst receiving a DAB station, press the TUNING ( or )
button repeatedly to select the desired station.
button repeatedly to select the desired station.
!
The upper part of the display shows the current station
name, and the name of the station being scanned (with "
name, and the name of the station being scanned (with "
") appears in the lower part.
The current station name
The name of the station being scanned
!
If a station has one or more secondary
services, " " appears after to the station
name. You can select a secondary ser-
vice.
services, " " appears after to the station
name. You can select a secondary ser-
vice.
!
Whilst selecting a secondary service,
" " appears before the station name.
This indicates a primary service is avail-
able.
" " appears before the station name.
This indicates a primary service is avail-
able.
3
Within 30 seconds, press the ENTER button.
!
When the current station is primary with secondary, "P" lights
up.
up.
!
When the current station is secondary, "S" lights up.
!
When the current station is primary without other services,
no indicator lights up.
no indicator lights up.
3
10
FV-DB1E
04/4/12
FV-DB1E_2.fm
TINSEA025SJZZ
D
AB (Digi
tal A
udio
Br
oa
dcasting
) Operati
o
n
Listening to the DAB (Digital Audio Broadcasting) (continued)
!
Manual tune
You can manually store stations which Auto tune cannot find. If
reception is poor, you can adjust the sensitivity.
Manual tune is only available after Auto tune. Perform Auto tune
first.
reception is poor, you can adjust the sensitivity.
Manual tune is only available after Auto tune. Perform Auto tune
first.
Exiting Manual tune:
Press the ENTER button to exit manual tuning.
Press the ENTER button to exit manual tuning.
1
Press the BAND button until "DAB" ap-
pears on the display.
pears on the display.
2
Press the MENU button repeatedly to
select "Manual tune".
select "Manual tune".
3
Within 30 seconds, press the ENTER
button.
button.
4
Within 30 seconds, press the TUNING
( or ) button to tune in to the desired
station.
( or ) button to tune in to the desired
station.
5
Within 30 seconds, press the ENTER button.
"
Reception sensitivity appears. The
white block indicates the minimum re-
quired level and the solid blocks indicate
the current level.
white block indicates the minimum re-
quired level and the solid blocks indicate
the current level.
"
If the level is below the white block,
move the rod aerial or unit to improve re-
ception. When the level reaches the
white block, a multiplex name appears
and the multiplex will be added to the
service list.
move the rod aerial or unit to improve re-
ception. When the level reaches the
white block, a multiplex name appears
and the multiplex will be added to the
service list.
11
FV-DB1E
04/4/12
FV-DB1E_2.fm
TINSEA025SJZZ
D
AB (Digi
tal A
udio
Br
oa
dcasting
) Operati
o
n
Various settings
!
Changing the station order
You can change the order of stations in the station list.
!
Adjusting the DRC value
When the volume is low, adjust the DRC (Dynamic Range Control)
value to make the sound more audible (may not available for some
broadcast material).
value to make the sound more audible (may not available for some
broadcast material).
1
Press the BAND button until "DAB" ap-
pears on the display.
pears on the display.
2
Press the MENU button repeatedly to
select "Station order".
select "Station order".
3
Within 30 seconds, press the ENTER
button.
button.
4
Within 30 seconds, press the TUNING ( or ) button to
select the desired station order.
select the desired station order.
Alphanumeric:
All stations are displayed in alphanumeric order. This is the de-
fault setting.
fault setting.
Fav. station:
The 10 most recent stations appear as "Fav." and then appear
in alphanumeric order.
in alphanumeric order.
Active station:
The station list shows receivable stations and then others in al-
phanumeric order.
phanumeric order.
Multiplex:
Stations are sorted by frequency, in ascending order.
Trim stn. list:
Delete inactive stations from the list.
5
Within 30 seconds, press the ENTER
button.
button.
1
Press the BAND button until "DAB" appears on the display.
2
Press the MENU button repeatedly to
select "Set DRC Value".
select "Set DRC Value".
3
Within 30 seconds, press the ENTER
button.
button.
4
Within 30 seconds, press the TUNING
( or ) button to select the desired
DRC value.
( or ) button to select the desired
DRC value.
DRC 1:
Dynamic range is controlled as set for the broad-
cast. This is the default setting.
cast. This is the default setting.
DRC 0:
DRC is off.
DRC 1/2:
Dynamic range is controlled half as much as the
level set for the broadcast.
level set for the broadcast.
5
Within 30 seconds, press the ENTER
button.
button.
3
12
FV-DB1E
04/4/12
FV-DB1E_2.fm
TINSEA025SJZZ
D
AB (Digi
tal A
udio
Br
oa
dcasting
) Operati
o
n
Changing the information display
You can switch information in the lower part of display.
Press the INFO button.
Each time the button is pressed, the information display changes in the following order.
When "Not available" appears, the INFO button does not allow you to change the display.
Press the INFO button.
Each time the button is pressed, the information display changes in the following order.
When "Not available" appears, the INFO button does not allow you to change the display.
Display
Description
Scrolling text
Information scrolls across the display when sent from the station (set by default).
You can pause, forward, or reverse scrolling text.
Pausing text scroll:
Press the ENTER button.
Forwarding/reversing text scroll: Whilst text scroll is paused, press the TUNING ( or ) button. Press once to
move forward one character, hold down to scroll through, and release to return to
the pause mode.
the pause mode.
Resuming text scroll:
Whilst text scroll is paused, press the ENTER button again.
Programme type
A description of the type of content being broadcast by the station.
Multiplex name
The name of the multiplex (ensemble) which provides the current service.
Channel
The DAB channel and frequency for the station.
Mode
The data transfer speed and channel type (stereo or mono) appear.
Signal quality
The signal quality is displayed as a number (0 - 100).
[85-100: Good 70-84: Fair 0-69: Poor]
Sensitivity
Sensitivity of reception.
The empty block indicates the minimum required level for reception and the solid blocks indicate the current level.
Click on the first or last page to see other FV-DB1E (serv.man2) service manuals if exist.