Sharp DK-KP85H User Manual / Operation Manual ▷ View online
12
Listening to the iPod, iPhone or iPad (continued)
■
Navigating the iPod, iPhone or iPad
menus
1
Press the MENU button to view the menu on iPod,
iPhone or iPad unit. Press it again to go back to
previous menu.
2
Use the PRESET ( or ) button to select an item on
the menu and then press ENTER button.
Note:
When navigating the iPod, iPhone or iPad menu with
When navigating the iPod, iPhone or iPad menu with
remote control, do not operate any of the buttons on
the iPod or iPhone unit. The volume level is adjusted by
pressing the VOLUME (+ or -) on the main unit or VOL +/-
on the remote control. Adjusting the volume on the iPod,
iPhone or iPad units give no effect.
iPod, iPhone and iPad operations:
The operations described below depend on the generation
iPod, iPhone and iPad operations:
The operations described below depend on the generation
of iPod, iPhone and iPad you are using.
System on operation:
When the main unit is powered on, the iPod, iPhone or
System on operation:
When the main unit is powered on, the iPod, iPhone or
iPad units will automatically power on when docked or
connected in the unit.
System off (stand-by operation):
When the main unit is turned to stand-by mode, the docked
System off (stand-by operation):
When the main unit is turned to stand-by mode, the docked
iPod, iPhone or connected iPad unit will automatically turn
to stand-by mode.
■
To disconnect iPod, iPhone or iPad
Simply remove the iPod or iPhone from the docking
station or iPad connector from USB terminal. It is safe to
do so even during playback.
Caution:
Caution:
●
Stop button ( ) at main unit is invalid during iPod
function.
■
Various iPod, iPhone and iPad functions
Function
Main
unit
Remote control
Operation
Dock/
USB
Dock
USB
Play
Press in the pause
mode.
Pause
Press in the
playback mode.
Track
up/
down
Press in the
playback or pause
mode.
If you press the
button in the pause
mode, press the
/ button to start
the desired track.
Fast
forward/
reverse
Press and hold
down in the
playback mode.
Release the
button to resume
playback.
Repeat
____
Press to toggle
repeat mode.
Shuffle
Press and hold
to toggle shuffle
mode.
Menu
____
Press to view the
iPod menu during
iPod function.
Enter
____
Press to confirm
the selection.
Cursor
Up/
Down
____
Press to select the
iPod menu.
13
Listening to a CD or MP3/WMA disc
BLUETOOTH
PAIRING
■
Disc playback
1
Press the ON/STAND-BY button to turn the power on.
2
Press the CD/USB button on the remote control or
FUNCTION button repeatedly on the main unit to select
CD function.
3
Press the OPEN/CLOSE button to open the disc
compartment.
4
Place the disc in the disc compartment, label side front.
5
Press the OPEN/CLOSE button to close the disc
compartment.
6
Press the / (CD / ) button to start playback. After the
last track is played, the unit will stop automatically.
To stop playback:
●
Press the (CD ) button.
Caution:
●
Do not place two discs in the disc compartment.
●
Do not play discs of special shapes (heart, octagon,
etc). It may cause malfunctions.
●
Do not push the disc compartment while it is moving.
●
If the power fails while the compartment is open, wait
until the power is restored.
●
If TV or radio interference occurs during CD operation,
move the unit away from the TV or radio.
●
Be sure to place 8 cm (3”) disc in the middle of the
disc compartment.
●
Due to the structure of the disc information, it takes
longer to read an MP3/WMA disc than a normal CD
(approximately 20 to 90 seconds).
Notes for CD or MP3/WMA disc:
●
Rewritable multi-session discs with unfinished writing,
can still be played.
■
Various disc functions
Function Main
unit
Remote
control
Operation
Play
Press in the stop mode.
Pause
Press in the playback
mode. Press the
/ button to resume
playback from the
paused point.
Stop
Press in the playback
mode.
Track
up/down
Press in the playback or
stop mode.
If you press the button
in the stop mode, press
the / button to start the
desired track.
Fast
forward/
reverse
Press and hold down in
the playback mode.
Release the button to
resume playback.
■
Direct track search
By using the Numeric buttons, the desired tracks on the
current disc can be played.
Use the Numeric buttons on the remote control to
select the desired track.
●
The Numeric buttons allow you to select up to number 9.
●
When selecting number 10 or higher, use the “10+” button.
A. For example, to choose 13
1
Press the “10+” button once.
2
Press the “1” button.
3
Press the “3” button.
Selected track
number
B. For example, to choose 130
1
Press the “10+” button twice.
2
Press the “1” button.
3
Press the “3” button.
4
Press the “0” button.
Notes:
●
A track number higher than the number of tracks on
the disc cannot be selected.
●
During random play, direct search is not possible.
14
Listening to a CD or MP3/WMA disc (continued)
■
Repeat play
Repeat play can play one track, all tracks or a programmed
sequence continuously.
To repeat one track:
Press the PLAY MODE button repeatedly until “Repeat One”
appears. Press the / (CD / ) button.
To repeat all tracks:
Press the PLAY MODE button repeatedly until “Repeat All”
appears. Press the / (CD / ) button.
To repeat desired tracks:
Perform steps 1 - 5 in “Programmed play” section on page 14
and then press the PLAY MODE button repeatedly until “Repeat
All” appears.
To repeat one folder :
While in Folder mode on (MP3/WMA), press PLAY MODE button
repeatedly until “Repeat Folder” appears. Press the / (CD / )
button.
To cancel repeat play:
Press the PLAY MODE button repeatedly until “Normal” appears
and “ ” disappears.
Caution:
After performing repeat play, be sure to press the (CD )
After performing repeat play, be sure to press the (CD )
button. Otherwise, the disc will play continuously.
■
Random play
The tracks on the disc can be played in random order
automatically.
To random play all tracks:
Press and hold the PLAY MODE button on the remote
To random play all tracks:
Press and hold the PLAY MODE button on the remote
control until “Random” appears. Press the / (CD / )
button.
To cancel random play:
Press the PLAY MODE button again. “RDM” indicator will
To cancel random play:
Press the PLAY MODE button again. “RDM” indicator will
disappear.
Notes:
●
If you press the
button during random play, you
can move to the track selected next by the random
operation. On the other hand, the
button does not
allow you to move to the previous track. The beginning
of the track being played will be located.
●
In random play, the unit will select and play tracks
automatically. (You cannot select the order of the tracks.)
■
Programmed play (CD)
You can choose up to 32 selections for playback in the
order you like.
1
While in the stop mode, press the MEMORY button on
the remote control to enter the programming save mode.
2
Press the
or
button on the remote control to
select the desired track.
Selected track number
3
Press the MEMORY button to save the track number.
4
Repeat steps 2 - 3 for other tracks. Up to 32 tracks can
be programmed. If you want to check the programmed
tracks, press the MEMORY button repeatedly. If you
make a mistake, the programmed tracks can be
cleared by pressing the CLEAR button.
5
Press the / (CD / ) button to start playback.
15
Listening to a CD or MP3/WMA disc (continued)
■
Programmed play (MP3/WMA)
1
While in the stop mode, press the MEMORY button to
enter the programming save mode.
2
Press the PRESET ( or ) button on the remote
control to select the desired folder.
Then press the
or
button on the remote control
to select the desired tracks.
3
Press the MEMORY button to save the folder and
track number.
4
Repeat steps 2 – 3 for other folder/tracks. Up to 32
tracks can be programmed.
5
Press the / (CD / ) button to start playback.
To cancel the programmed play mode:
During programmed stop mode, press the (CD )
During programmed stop mode, press the (CD )
button. The display will show “Memory Clear” and all the
programmed contents will be cleared.
Adding tracks to the programme:
If a programme has been previously stored, the “MEM”
Adding tracks to the programme:
If a programme has been previously stored, the “MEM”
indicator will be displayed. Press the MEMORY button.
Then follow steps 2 - 3 to add tracks.
Notes:
Notes:
●
When the disc compartment is opened, the programme
is automatically cancelled.
●
If you press the ON/STAND-BY button to enter the
stand-by mode or change the function from CD to
another, the programmed selections will be cleared.
●
During the programme operation, random play is not
possible.
■
Procedure to playback MP3/WMA disc
with folder mode on
To play back CD-R/RW.
1
Press the CD/USB button on the remote control, and
load an MP3/WMA disc. Press the FOLDER button
and disc info will be displayed.
MP3 indicator
Total number of files
TOTAL indicator
WMA indicator
Total number of folder
2
Press the PRESET ( or ) button to select desired
playback folder. (Folder mode on)
FOLDER
indicator
FOLDER number First track number in
the folder
3
Select desired file to be played back by pressing the
or
button.
4
Press the / (CD / ) button. Playback will start and
file name will be displayed.
●
Title, Artist and Album name are displayed if they
are recorded on the disc.
●
In case of playback with the folder mode on, press
the PRESET ( or ) button, and the folder can
be selected even though it is in playback/pause
mode. It will continue playback/pause mode in the
1st track of the selected folder.
●
Display content can be changed by pressing the
DISPLAY button.
Title display
Counter display
Album display
Folder display
File name display
Artist display
Note:
If “Not Support” is displayed, it means “Copyright
If “Not Support” is displayed, it means “Copyright
protected WMA file” or “Not supported playback file” is
selected.
Click on the first or last page to see other DK-KP85H service manuals if exist.