Sharp DK-CL8PH User Manual / Operation Manual ▷ View online
17
2011 September 14
DK-CL8PH ENUK_A6_p01-p21.fm
DK-CL8PH
Adva
nce
d
Fea
ture
s
Enhancing your system
The auxiliary cable is not included. Purchase a separate
auxiliary cable as shown below.
auxiliary cable as shown below.
■ Listening to the audio/video sounds from
portable audio player, computer etc.
Note:
To prevent noise interference, place the unit away from the
television and do not make any auxiliary playback, whilst
listening to the iPod or iPhone.
To prevent noise interference, place the unit away from the
television and do not make any auxiliary playback, whilst
listening to the iPod or iPhone.
Portable audio player
Computer
To the line output
socket
Auxiliary cable
(not supplied)
1
Use the auxiliary cable to connect the portable audio
player, computer etc. to the AUDIO IN socket.
player, computer etc. to the AUDIO IN socket.
When using video equipment, connect the audio output to
this unit and the video output to a television.
this unit and the video output to a television.
2
Press the ON/STAND-BY button to turn the power on.
3
Press the FUNC. button repeatedly to select “AU”
(Audio In) function.
(Audio In) function.
4
Play the connected equipment.
18
2011 September 14
DK-CL8PH ENUK_A6_p01-p21.fm
DK-CL8PH
Re
fe
renc
es
Troubleshooting chart
Many potential problems can be resolved by the owner without
calling a service technician.
If something is wrong with this product, check the following
before calling your authorised SHARP dealer or service centre.
calling a service technician.
If something is wrong with this product, check the following
before calling your authorised SHARP dealer or service centre.
■ General
■ Tuner
■ iPod and iPhone
Symptom
Possible cause
●
The clock is not set
to the correct time.
to the correct time.
●
Did a power failure occur? Reset
the clock. (Refer to page 11)
the clock. (Refer to page 11)
●
When a button is
pressed, the unit
does not respond.
pressed, the unit
does not respond.
●
Set the unit to the power stand-by
mode and then turn it back on.
mode and then turn it back on.
●
If the unit still malfunctions, reset it.
(Refer to page 19)
(Refer to page 19)
●
No sound is heard.
●
Is the volume level set to “00”?
Symptom
Possible cause
●
The radio makes
unusual noises
continuously.
unusual noises
continuously.
●
Is the unit placed near the TV or
computer?
computer?
●
Is the FM aerial placed properly?
Move the aerial away from the AC/
DC adaptor if it is located nearby.
Move the aerial away from the AC/
DC adaptor if it is located nearby.
Symptom
Possible cause
●
No sound is produced.
No image appears on
the TV/monitor.
No image appears on
the TV/monitor.
●
The iPod or iPhone unit
software version is not update
to the latest version. Please
visit Apple’s homepage.
software version is not update
to the latest version. Please
visit Apple’s homepage.
●
The iPod or iPhone is not
playing.
playing.
●
The iPod or iPhone is not
properly connected to the unit.
properly connected to the unit.
●
Is the AC/DC adaptor of the
unit plugged in?
unit plugged in?
●
The video cable is not properly
connected.
connected.
●
The TV/monitor’s input selection
is not properly set.
is not properly set.
●
iPod or iPhone will not
charge.
charge.
●
The iPod or iPhone is not
making full contact with the
connector.
making full contact with the
connector.
●
Is the AC/DC adaptor of the
unit plugged in?
unit plugged in?
●
Using iPod (3
rd
generation).
●
The iPod or iPhone is not
supported. Refer page 12 for
compatible models.
supported. Refer page 12 for
compatible models.
●
“This accessory is not
made to work with
iPhone” or similar
appears on iPhone
screen.
made to work with
iPhone” or similar
appears on iPhone
screen.
●
The iPhone battery is low.
Please charge the iPhone.
Please charge the iPhone.
●
iPhone not properly docked.
19
2011 September 14
DK-CL8PH ENUK_A6_p01-p21.fm
DK-CL8PH
Re
fe
renc
es
■ Condensation
Sudden temperature changes, storage or operation in an
extremely humid environment may cause condensation inside
the cabinet.
Condensation can cause the unit to malfunction. If this happens,
leave the power on until normal playback is possible (about 1
hour).
extremely humid environment may cause condensation inside
the cabinet.
Condensation can cause the unit to malfunction. If this happens,
leave the power on until normal playback is possible (about 1
hour).
■ If problem occurs
When this product is subject during operation to strong external
interference (mechanical shock, excessive static electricity,
abnormal supply voltage due to lightning, etc.) or if it is operated
incorrectly, it may malfunction.
interference (mechanical shock, excessive static electricity,
abnormal supply voltage due to lightning, etc.) or if it is operated
incorrectly, it may malfunction.
If such a problem occurs, do the following:
1
1
Set the unit to the stand-by mode and turn the power on
again.
again.
2
If the unit is not restored in the previous operation, unplug
and plug in the unit, and then turn the power on.
and plug in the unit, and then turn the power on.
Note:
If neither operation above restores the unit, remove the backup
batteries.
If neither operation above restores the unit, remove the backup
batteries.
■ Clearing all the memory (reset)
In Audio In (AU) function, press
button then press and hold
/ button for 5 seconds. Unit will display “ ” for a while and unit
will reset.
Caution:
This operation will erase all data stored in memory including
clock, alarm settings and tuner preset.
This operation will erase all data stored in memory including
clock, alarm settings and tuner preset.
■ Before transporting the unit
Undock the iPod or iPhone from the unit. Then, set the unit to
the power standby mode. Carrying the unit with iPod or iPhone
left docked might damage the systems.
the power standby mode. Carrying the unit with iPod or iPhone
left docked might damage the systems.
20
2011 September 14
DK-CL8PH ENUK_A6_p01-p21.fm
DK-CL8PH
Re
fe
renc
es
Maintenance
■ Cleaning the unit
Periodically wipe the unit with a clean soft cloth.
Caution:
●
Do not use chemicals for cleaning (petrol, paint thinner, etc.).
It may damage the unit finishing.
It may damage the unit finishing.
●
Do not apply oil to the inside of the unit. It may cause
malfunctions.
malfunctions.
Specifications
As part of our policy of continuous improvement, SHARP
reserves the right to make design and specification changes for
product improvement without prior not ice. The performance
specification figures indicated are nominal values of production
units. There may be some deviations from these values in
individual units.
reserves the right to make design and specification changes for
product improvement without prior not ice. The performance
specification figures indicated are nominal values of production
units. There may be some deviations from these values in
individual units.
■ General
(*) This power consumption value is obtained when in the power
stand-by mode and dimmer 2.
stand-by mode and dimmer 2.
Power source
DC IN 9V
2500mA: AC/DC adaptor
(AC 100 - 240 V ~ 50/60 Hz)
Clock Backup: 3V
Clock Backup: 3V
(not include as
accessory AAA type battery use) x 2
Power
consumption
consumption
Power On: 15 W
Power stand-by: 0.4 W (*)
Power stand-by: 0.4 W (*)
Output power
Front speakers:
RMS: 4 W (2 W + 2 W) (10% THD)
RMS: 2 W (1 W + 1 W) (1% THD)
Subwoofer:
RMS: 4 W (10% THD)
RMS: 2.5 W (1% THD)
RMS: 4 W (2 W + 2 W) (10% THD)
RMS: 2 W (1 W + 1 W) (1% THD)
Subwoofer:
RMS: 4 W (10% THD)
RMS: 2.5 W (1% THD)
Speaker
2.1-way type speaker system
Front speaker: 4cm (1 1/2")
Front speaker: 4cm (1 1/2")
Full Range (x2)
Subwoofer: 7cm (2 3/4") Woofer
Speaker maximum
input power
input power
8 W/Channel
Speaker rated
input power
input power
4 W/Channel
Output terminals
Video output: 1Vp-p
Click on the first or last page to see other DK-CL8PH service manuals if exist.