DOWNLOAD Sharp DK-CL8PH Service Manual ↓ Size: 4.95 MB | Pages: 24 in PDF or view online for FREE

2011 September 14 

DK-CL8PH ENUK_A6_p01-p21.fm

DK-CL8PH

■ iPod or iPhone playback

■ To disconnect iPod or iPhone

Simply remove the iPod or iPhone from the dock. It is safe to
do so even during playback.

■ Various iPod or iPhone functions

iPod and iPhone operation
The operations described above depend on the generation
iPod and iPhone you are using.

For iPod touch and iPhone, playback will automatically
start once the desired file is selected.

iPhone

Press in the pause mode.

Press in the playback mode.

Press in the playback or pause 
mode. 
If you press the button in the 
pause mode, press the 

/  

button to start the desired 
track.

Press and hold down in the 
playback mode.

Release the button to resume 
playback.

Press for more than 2 seconds 
to toggle the video out display 
between iPod or iPhone and 
TV.

2011 September 14 

DK-CL8PH ENUK_A6_p01-p21.fm

DK-CL8PH

■ Tuning

●

When radio interference occurs, auto scan tuning may stop
automatically at that point.

●

Auto tuning will skip weak signal stations.

●

To stop the auto tuning, press the TUNING  (

  or 

)  button

again.

■ Programming a station

You can store 40 FM stations in memory.

Manual tuning:
Press the TUNING (

  or 

) button to tune into the

desired station.

Auto tuning:
When the TUNING (

 or 

)  button is pressed for more

than 0.5 seconds, scanning will start automatically and the
tuner will stop at the first receivable broadcast station.

select the preset channel number.
Store the stations in memory, in order, starting with preset
channel 1.

If the preset number indicators disappear before the
station is programmed, repeat the operation from step 2.

Repeat steps 1 - 4 to set other stations, or to change
a preset station.
When a new station is stored in memory, the station
previously programmed for that preset channel number
will be erased.

2011 September 14 

DK-CL8PH ENUK_A6_p01-p21.fm

DK-CL8PH

Note:
The batteries system protects the programmed stations should
there be a power failure or the AC/DC adaptor becomes
disconnected. If the backup batteries are drain off, the
programmed stations will be erased.

■ To recall a programmed station

Press CLOCK/MEM. button then press 

 or 

 button

repeatedly to select the desired programmed station.

■ Alarm

The unit turns on and play desired source (iPod or TUNER) or
Buzzer sound for 1 hour alarm duration.
Before setting the alarm:

Setting the alarms
In this example, the setting is for ALARM 1. The same method is
used to set for ALARM 2.

1 Check that the clock is set to the correct time. 

(refer page 11)

If it is not set, you cannot use the alarm function.

2 For iPod or iPhone playback: Insert iPod or iPhone to the

unit. (refer page 13) 

3 For TUNER: Set preset memory. (refer page 14)

Press the  (

or ) 

button once to advance the time by

1 hour. Hold it down to advance continuously. “AM” or “PM”
indicator will interchange after each 12 hour cyclic.

2011 September 14 

DK-CL8PH ENUK_A6_p01-p21.fm

DK-CL8PH

Note:
If wake up source is set to iPod, and iPod is not present, the
alarm source will change to default Buzzer.

■ Activate and deactivate the alarm

●

During alarm function, press ALARM RESET button to stop 
alarm and it will come again on the next day.

■ Snooze function

Once alarm has started, pressing the SNOOZE/DIMMER
button will stop alarm for 9 minutes.
Once the snooze time has expired, alarm will continue.
The snooze function can be operated during 1 hour alarm
duration.

Press the (

 or 

) button once to advance the time by 1

minute. Hold it down to advance continuously.

Weekday : MON - FRI (alarm activate from Monday to

Friday only)

Weekend : SAT - SUN (alarm activate from Saturday to

Sunday only)

Everyday : MON - SUN (alarm activate daily)

Wake up source:

Alarm icon “ ” will light up to indicate alarm setting.

iPod

RADIO

BUZZER