DOWNLOAD Sharp DK-A10H (serv.man2) Service Manual ↓ Size: 3.92 MB | Pages: 36 in PDF or view online for FREE

DK-A10H

DK-A10H(BK)

To playback MP3/WMA (Windows Media Audio) file
There are many music sites on the internet that you can download
MP3/WMA (Windows Media Audio) music files from, follow the
instructions from the website on how to download the music files.
You can then playback these downloaded music files by burning
them to a CD-R/RW disc.

Your downloaded song/files are for personal use only. Any other
usage of the song without owner’s permission, is against the law.

If MP3/WMA files are recorded in several folders, a folder number will
be set to each folder automatically.

These folders can be selected by the FOLDER button on the remote
control. If there is no supported file formats inside the selected folder,
the folder is skipped and the next folder will be selected.
Example: How to set folder number if MP3/WMA format files are
recorded as below figure.

* The folder and file order information which is recorded on the disc
depends on the writing software. There may be possibilities that this
unit will play back the files not according to your expected playback
order.

Folder mode on/off can be operated by the FOLDER button on the
remote control. Files that are played when folder mode is set to the
on position, may differ from those played back when folder mode is
turned off.

Folder Mode Off case:
All the files starting from the selected folder or file will be played back.
If file 3 inside Folder C is  selected, all the files starting from file 3 will
be played back.

Folder Mode On case:
All the files inside the selected folder will be played back. 
In case Folder D is selected, file 4, 5 and 6 will be played back. File
7 and 8 in Folder E will not be played back.

1. ROOT folder is set as folder 1.
2. As for folders inside ROOT folder (Folder A and Folder B), the 

folder which is recorded earlier on the disc will be set as folder 2.

3. As for folder inside Folder A (Folder C and Folder D), the folder 

which is recorded earlier on the disc will be set as folder 3.

4. Because there is no folder in Folder C, Folder D will be set as 

folder 4.

5. Folder E which is inside Folder D will be set as folder 5.
6. Folder B inside the ROOT folder will be set as folder 6.

ROOT
(FOLDER 1) 

FOLDER A
(FOLDER 2)

FOLDER B
(FOLDER 6)

FILE 7
FILE 8

FILE 1
FILE 2
FILE 3

FILE 4
FILE 5
FILE 6
FOLDER E
(FOLDER 5)

FOLDER C
(FOLDER 3)

FOLDER D
(FOLDER 4)

FILE 9
FILE 10

DK-A10H

DK-A10H(BK)

To play back CD-R/RW.

If “NOSUPPORT” is displayed, it means “Copyright protected
WMA file” or “Not supported playback file” is selected.

After disc is inserted and TOC reading, disc info will be displayed.

In case folder is selected, proceed to step 2.
In case file is selected, proceed to step 4.

To start playback with folder mode on, go to step 5.
To change the playback folder, press the TUNING (  or  ) to 
select another folder.

  or 

 button. Proceed to step 5.

TOTAL indicator

MP3 indicator

CD indicator

WMA indicator

FOLDER indicator

FOLDER name

FILE name

or   button. (Folder mode off)

 

 

 

 

Title, Artist & Album name are displayed if they are recorded on 
the disc.
Display content can be changed by pressing the DISPLAY 
button.

In case of playback with the folder mode on, press the TUNING (
or )  button, and the folder can be selected even though it is in
playback/pause mode.
It will continue playback/pause mode in the 1st track of the
selected folder.

FILE name

   Clock Display  

   Album Name

   File Name

   Artist Name

   Timer Counter

DK-A10H

DK-A10H(BK)

 
Auto power on function:
When you press any of the following buttons, the unit turns on.

TUNER button (main unit): The unit turns on and the TUNER
function is activated.

 /   button (main unit and remote control): The unit turns on and

playback of the last function starts (iPod, CD, TUNER, AUX).

When radio interference occurs, auto scan tuning may stop
automatically at that point.
Auto scan tuning will skip weak signal stations.
To stop the auto tuning, press the TUNING (

 or 

) button

again.

To receive an FM stereo transmission:
Press the TUNER button (main unit) or FUNCTION button (remote
control) to select stereo mode and “ST” indicator will be displayed.

“

” will appear when an FM broadcast is in stereo.

If the FM reception is weak, press the TUNER button (main unit)
or FUNCTION button (remote control) to extinguish the “ST”
indicator. The reception changes to monaural, and the sound
becomes clearer.

 

Press the TUNING (

 or 

) button as many times as required 

to tune in to the desired station.

When the TUNING (

 or 

) button is pressed for more than

0.5 seconds, scanning will start automatically and the tuner will
stop at the first receivable broadcast station.

FM stereo mode indicator

FM stereo receiving indicator

DK-A10H

DK-A10H(BK)

You can store 40 AM and FM stations in memory and recall them at
the push of a button. (Preset tuning)

Note:
The backup function protects the memorised stations for a few hours
should there be a power failure or the AC power lead becomes
disconnected.

 

The stations saved in memory can be scanned automatically.
(Preset memory scan)

  button to select the

Store the stations in memory, in order, starting with preset
channel 1.

If the preset number indicators disappear before the station is
memorised, repeat the operation from step 2.

When a new station is stored in memory, the station previously
memorised for that preset channel number will be erased.

Press the 

 or 

 button for less than 0.5 seconds to select the

desired station.

1

Press the  

 or 

 button for more than 0.5 seconds.

The preset number will flash and the programmed stations will be
tuned in sequentially, for 5 seconds each.

2

Press the 

 or 

 button again when the desired 

station is located.

1

Press and hold the CLEAR button for more than 3 seconds.
“TUN CLEAR” will be displayed.

2

Within 10 seconds, press the MEMORY button.
“COMPLETE” will be displayed.