DOWNLOAD Sharp DK-A10H (serv.man2) Service Manual ↓ Size: 3.92 MB | Pages: 36 in PDF or view online for FREE

DK-A10H

DK-A10H(BK)

This system can play back a standard CD, CD-R/RW in the CD format
and CD-R/RW with MP3 or WMA files, but cannot record on them.
Some audio CD-R and CD-RW discs may not be playable due to the
state of the disc or the device that was used for recording.  

This system supports MPEG 1 Layer 3, MPEG 2 Layer 3, and
VBR files.
During VBR file playback, time counter in the display may differ
from its actual playback time.
Bitrate which is supported by MP3 is 32 ~ 320 kbps.

“MP3” and “WMA” indicator will light up after the unit reads
information on an MP3 or WMA disc.
Bitrate which is supported by WMA is 64 ~ 160 kbps.

 
Auto power on function:
When you press any of the following buttons, the unit turns on.

CD button (main unit): The unit turns on and the CD function is
activated.

 /   button (main unit and remote control): The unit turns on and

play back of the last function starts (iPod, CD, TUNER, AUX).

DK-A10H

DK-A10H(BK)

Playback will begin from track 1.
After the last track on the disc is played, the unit will stop
automatically.

Do not play discs of special shapes (heart, octagon, etc).                     
It may cause malfunctions.
Do not push the disc whilst it is moving.
If the power fails whilst the disc is moving, wait until the power is
restored.
If TV or radio interference occurs during CD operation, move the
unit away from the TV or radio.

8 cm disc can be inserted without an adaptor.
Due to the structure of the disc information, it takes longer to 
read an MP3/WMA disc than a normal CD (approximately 20 
to 90 seconds).

Press the   /   button to start playback.

To remove the disc:
In the stop mode, press the 

 button.

12 cm (5")

8 cm (3")

Total number of
tracks on the disc 

Total playing
time of the disc 

Total number
of files

Disc Name

Disc play indicator

Press in the stop mode.

Press in the playback mode.

Press in the playback mode. 
Press the   /    button to resume 
playback from the paused point.

Press in the playback or stop 
mode.

If you press the button in the stop 
mode, press the   /   button to 
start the desired track.
Press and hold down in stop 
mode, the track will 

skip up/down   

rapidly as figure below.
Example: Current track no.65
Down: 65 –> 64 –> 63 –> 62 –> 
61 –> 60 –> 50 –> 40
Up: 65 –> 66 –> 67 –> 68 –> 69 
–> 70 –> 80 –> 90
Note: This operation is  invalid if     
total track is less than 20.

Press and hold down in the      
playback mode.

Release the button to 
resume playback.

When the end of the last track is reached during fast forward,  “END”
will appear on the display and CD operation will be paused. When the
beginning of the first track is reached during fast reverse, the unit will
enter the playback mode.
Rewritable multi session discs with unfinished writing, can still be
played.

DK-A10H

DK-A10H(BK)

Repeat play can play all tracks on a disc, folder or a programmed
sequence continuously.

To cancel repeat play:
Press the PLAY MODE button again.
“ ” will disappear.

The tracks on the disc can be played in random order automatically.

To cancel random play:
Press and hold down the PLAY MODE button.
“RND” will disappear.

If you press the 

 button during random play, you can move to

the track selected next by the random operation. However, the 
button does not allow you to move to the previous track. It will go
to the beginning of the current track instead.
In random play, the CD player will select and play tracks
automatically. (You cannot select the order of the tracks.)
Random and repeat play can be use on the same time.

Caution:
After performing repeat play, be sure to press the   button. 
Otherwise, the disc will play continuously.

Press the PLAY MODE button on the remote control.

Press the   /   button.

To random play:
Press and hold down the PLAY MODE button on the remote 
control.
Press   /   button.

DK-A10H

DK-A10H(BK)

You can choose up to 32 selections for playback in the order you like.

To cancel the programmed play mode:
Whilst in the stop mode and the “MEM” indicator is lit, press the
CLEAR button on the remote control. The “MEM” indicator will
disappear and all the programmed contents will be cleared.

Adding tracks to the programme:
If a programme has been previously stored, the “MEM” indicator will
be displayed. Then follow steps 1 - 6 to add tracks. The new tracks
will be stored after the last track of the original programme.

To check which tracks are programmed:
Whilst the unit is stopped in the programmed play mode, press the

 or 

 button.

When a disc with programmed tracks is ejected, the programme
is automatically cancelled.
Even if you press the ON/STAND-BY button to enter the stand-by
mode or change the function from CD to another, the programmed
selections will not be cleared.
During the programme operation, random play is not possible.

       Selected track number

If you make a mistake, the programmed tracks can be cleared 
by pressing the CLEAR button.

The total number in memory will 
appear.

Press the   /   button to start playback.

To clear the programmed selections:
Press the CLEAR button on the remote 
control whilst the “MEM” indicator is flashing.
Each time the button is pressed, one track will 
be cleared, beginning with the last track 
programmed.