Sharp CD-DP900 (serv.man9) User Manual / Operation Manual ▷ View online
17
CD-DP900E(UK)_2.fm
02/1/8
CD-DP900E
CD Pla
y
ba
c
k
- L
ist
en
in
g
t
o
a CD
(
C
Ds)
-
To locate the beginning of a track
Notes:
You can locate the beginning of a track on a single disc only.
The
/
or
/
button on the remote control allows you to locate the begin-
ning of a track.
To locate the desired portion
Notes:
Normal playback will resume when the
/
or
/
button is released.
You can locate the desired portion on a single disc only.
When the end of the last track is reached during fast forward, "END" will appear on
the display and CD operation will be paused. When the beginning of the first track
is reached during fast reverse, the unit will enter the playback mode.
the display and CD operation will be paused. When the beginning of the first track
is reached during fast reverse, the unit will enter the playback mode.
The
/
or
/
button on the remote control allows you to locate the
desired portion.
Starting playback with a desired track
You can play a disc starting with the desired track.
Note:
When the DISC SKIP button is pressed during playback, the next disc will begin auto-
matically.
matically.
Caution:
Do not place two CDs in one disc tray.
Do not play discs with special shapes (heart- or octagon-shaped). It may cause
malfunctions.
malfunctions.
Do not push the disc tray whilst it is moving.
Do not turn the disc tray by hand. This may cause malfunctions.
If the power fails whilst the tray is open, wait until the power is restored.
If the disc tray is stopped forcibly, "ER-CD10" will appear on the display for 3 sec-
onds and the unit will not function. If this occurs, press the ON/STAND-BY button
to enter the power stand-by mode and then turn the power on again.
onds and the unit will not function. If this occurs, press the ON/STAND-BY button
to enter the power stand-by mode and then turn the power on again.
If TV or radio interference occurs during CD operation, move the unit away from
the TV or radio.
the TV or radio.
If a disc is damaged, dirty, or loaded upside down, the disc will skip.
To move to the beginning of the next track:
Press the
/
button for less than 0.5 seconds during playback.
You can skip to any track by pressing the
/
button repeatedly until the de-
sired track number appears.
To restart the track being played:
Press the
/
button for less than 0.5 seconds during playback.
You can skip to any track by pressing the
/
button repeatedly until the de-
sired track number appears.
For audible fast forward:
Press and hold down the
/
button during playback.
For audible fast reverse:
Press and hold down the
/
button during playback.
1
Whilst in the stop mode, press the DISC SKIP button to select the
desired disc.
desired disc.
2
Press the
/
or
/
button to select the desired track.
Selected disc number
Selected track number
You can also select a track by pressing the
/
or
/
button on the
remote control.
3
Press the / ( ) button to start playback.
Playback of the selected track is started. When the end of last track of the disc
selected is reached, the next disc will be automatically started.
selected is reached, the next disc will be automatically started.
18
CD-DP900E(UK)_2.fm
02/1/8
CD-DP900E
CD Pla
y
ba
c
k
- L
ist
en
in
g
t
o
a CD
(
C
Ds)
-
Listening to a CD (CDs) (continued)
Repeat play
All tracks on up to 3 discs, or a programmed sequence can be continuously repeated.
To repeat a desired track:
Perform steps 1 - 4 in the "Programmed play" section and then press the / ( )
button twice.
button twice.
To cancel repeat play:
Press the / ( ) button again.
" " will go out.
" " will go out.
Random play
The tracks on the disc(s) can be played in random order automatically.
To cancel random play:
Press the button.
Notes:
If you press the
/
button during random play, you can move to the track selected
next by the random operation. On the other hand, the
/
button does not allow you
to move to the previous track. The beginning of the track being played will be located.
In random play, the CD player will select and play tracks automatically. (You cannot
select the order of the tracks.)
select the order of the tracks.)
Caution:
After performing repeat or random play, be sure to press the (CD ) button. Other-
wise, the disc(s) will play continuously.
wise, the disc(s) will play continuously.
Programmed play
You can choose up to 32 selections for playback in the order you like.
Adding tracks to the programme:
If a programme has been previously stored, the "MEMORY" indicator will be displayed. Then follow
steps 1 - 3 to add tracks. The new tracks will be stored after the last track of the original programme.
steps 1 - 3 to add tracks. The new tracks will be stored after the last track of the original programme.
Notes:
Opening the disc tray automatically cancels the programmed sequence.
Even if you press the ON/STAND-BY button to enter the stand-by mode or change
the function from CD to another, the programmed selections will not be cleared.
the function from CD to another, the programmed selections will not be cleared.
During programme operation, random play is not possible.
To repeat all tracks on up to 3 discs:
Press the / ( ) button twice.
Press the RANDOM button on the remote control to begin random play.
1
Whilst in the stop mode, press the
DISC SKIP button to select the de-
sired disc.
DISC SKIP button to select the de-
sired disc.
Selected disc number
2
Press the
/
or
/
button to
select the desired track.
Selected track number
You can also select a track by pressing the
/
or
/
button on the
remote control.
3
Press the MEMORY/SET (MEMORY) button to save the track number.
Playback order
When the track is memorised, "MEMORY" will appear.
4
Repeat steps 1 - 3 for other tracks. Up to 32 tracks can be programmed.
If you make a mistake, the programmed tracks can be cleared by pressing the CLEAR button.
5
Press the / ( ) button to start playback.
To clear the programmed selections:
Press the CLEAR button on the remote control whilst the
"MEMORY" indicator is lit.
Each time the button is pressed, one track will be cleared,
beginning with the last track programmed. When all the
tracks are cleared, "MEMORY" will disappear.
"MEMORY" indicator is lit.
Each time the button is pressed, one track will be cleared,
beginning with the last track programmed. When all the
tracks are cleared, "MEMORY" will disappear.
19
CD-DP900E(UK)_2.fm
02/1/8
CD-DP900E
Ra
dio
- Lis
te
n
ing t
o
the
r
a
dio -
Listening to the radio
Tuning
To receive an FM stereo transmission:
Press the TUNER (BAND) button to display the "ST" indicator.
"
" will appear when an FM broadcast is in stereo.
If the FM reception is weak, press the TUNER (BAND) button to extinguish the
"ST" indicator. The reception changes to monaural, and the sound becomes
clearer.
"ST" indicator. The reception changes to monaural, and the sound becomes
clearer.
After use:
Press the ON/STAND-BY button to enter the power stand-by mode.
1
Press the ON/STAND-BY button to turn the power on.
2
Press the TUNER (BAND) button repeatedly to select the desired
frequency band (FM or AM).
frequency band (FM or AM).
3
Press the TUNING/TIME ( or ) button to tune in to the desired
station.
station.
Manual tuning:
Press the TUNING/TIME button as many times as required to tune in to the de-
sired station.
sired station.
Auto tuning:
When the TUNING/TIME button is pressed for more than 0.5 seconds, scanning
will start automatically and the tuner will stop at the first receivable broadcast sta-
tion.
will start automatically and the tuner will stop at the first receivable broadcast sta-
tion.
Notes:
When radio interference occurs, auto scan tuning may stop automatically at
that point.
that point.
Auto scan tuning will skip weak signal stations.
To stop the auto tuning, press the TUNING/TIME button again.
FM stereo mode indicator
FM stereo receiving indicator
Sound control (See page 14.)
20
CD-DP900E(UK)_2.fm
02/1/8
CD-DP900E
Ra
dio
- Lis
te
n
ing t
o
the
r
a
dio -
Listening to the radio (continued)
Memorising a station
You can store 40 AM and FM stations in memory and recall them at the push of a but-
ton. (Preset tuning)
ton. (Preset tuning)
Note:
The backup function protects the memorised stations for a few hours should there be
a power failure or the AC power lead disconnection.
a power failure or the AC power lead disconnection.
To recall a memorised station
To scan the preset stations
The stations saved in memory can be scanned automatically. (Preset memory scan)
To erase entire preset memory
1
Perform steps 1 - 3 in "Tuning" on page 19.
2
Press the MEMORY/SET button to enter the preset tuning saving
mode.
mode.
3
Within 30 seconds, press the PRESET ( or ) button to select the
preset channel number.
preset channel number.
Store the stations in memory, in order, starting with preset channel 1.
4
Within 30 seconds, press the MEMORY/SET button to store that
station in memory.
station in memory.
If the "MEMORY" and preset number indicators go out before the station is mem-
orised, repeat the operation from step 2.
orised, repeat the operation from step 2.
5
Repeat steps 1 - 4 to set other stations, or to change a preset sta-
tion.
tion.
When a new station is stored in memory, the station previously memorised will
be erased.
be erased.
Press the PRESET ( or ) button for less than 0.5 seconds to select
the desired station.
the desired station.
Preset channel
Frequency and frequency band
This can be operated by pressing the TUNER PRESET ( or ) button on the re-
mote control.
mote control.
1
Press the PRESET ( or ) button for more than 0.5 seconds.
The preset number will flash and the programmed stations will be tuned in se-
quentially, for 5 seconds each.
quentially, for 5 seconds each.
This can be operated by pressing the TUNER PRESET ( or ) button on the
remote control.
remote control.
2
Press the PRESET ( or ) button again when the desired station is located.
1
Press the ON/STAND-BY button to enter the stand-by mode.
2
Whilst pressing down the TUNER (BAND) button and the EQUALIZER/X-BASS/
DEMO button, press the ON/STAND-BY button until "TUNER CL" appears.
DEMO button, press the ON/STAND-BY button until "TUNER CL" appears.
Tuning (See page 19.)
Click on the first or last page to see other CD-DP900 (serv.man9) service manuals if exist.