Sharp CD-C621H (serv.man2) User Manual / Operation Manual ▷ View online
<P=004>
PRESET
PRESET
DISPLAY
MODE
MODE
(Continued)
■
To manually recall the stations stored in
memory
memory
Press the PRESET
X
or PRESET
W
button.
●
Each time the button is pressed, the channel number will
change.
change.
●
After the channel number has been displayed for 2 seconds,
the frequency for that channel will appear for 2 seconds, and
then the station name will appear.
the frequency for that channel will appear for 2 seconds, and
then the station name will appear.
■
To switch the display
Each time the DISPLAY MODE button is pressed whilst an FM
station is tuned in, the display will switch as follows:
station is tuned in, the display will switch as follows:
Station
name (PS)
name (PS)
Programme
type (PTY)
type (PTY)
Radio text
(RT)
(RT)
Frequency
When the station you are tuning in is not an RDS station or even
if it is an RDS station but it is very weak signal, the display will
change in the following order:
if it is an RDS station but it is very weak signal, the display will
change in the following order:
"NO PS"
"NO PTY"
"NO RT"
Frequency
Notes:
●
"NO PS", "NO PTY" or "NO RT" will flash for about 5 seconds,
and then the frequency will be displayed.
and then the frequency will be displayed.
●
The display can only be switched whilst tuned to the FM band.
■
Notes for Radio text
●
The radio text for 8 characters will be displayed steadily for
4 seconds and then it will scroll across the display.
4 seconds and then it will scroll across the display.
●
If you tune into a station which is not broadcasting any radio
text, even if it is an RDS station, when you switch to the
radio text position "NO RT" will be displayed.
text, even if it is an RDS station, when you switch to the
radio text position "NO RT" will be displayed.
●
Whilst radio text data is being received or when the text con-
tents change, "RT" will be displayed.
tents change, "RT" will be displayed.
■
Notes for RDS operation
If any of the following events occur, it does not mean that the
unit is faulty.
unit is faulty.
●
"PS", "NO PS" and a station name appear alternately, and
the unit does not operate properly.
the unit does not operate properly.
●
If a particular station is not broadcasting properly or a station
is conducting tests, the RDS reception function may not work
properly.
is conducting tests, the RDS reception function may not work
properly.
●
When you receive an RDS station whose signal is too weak,
information like the station name may not be displayed, even
if "RDS" is lit.
information like the station name may not be displayed, even
if "RDS" is lit.
(Main unit operation)
(Main unit operation)
CD-C621H(SUK) TINSE0245AWZZ
20
2
3
4
5
4
3
2
1
SM
<P=001>
(Continued)
■
EON-PTY
1
Tune in the desired RDS station (when a station name is
being displayed).
being displayed).
2
Press the EON button when "EON" appears.
●
"PTY TI" and "SELECT" will appear alternately for about 6
seconds.
seconds.
3
Whilst they are being displayed, select the desired pro-
gramme type using the PRESET
gramme type using the PRESET
X
or PRESET
W
button.
●
The selected programme type will flash.
4
Within 4 seconds, press the PTY.TI SEARCH button.
●
The selected programme type and "WAITING" will be dis-
played for 2 seconds each.
played for 2 seconds each.
●
"PTY" will appear, and the unit will enter the EON-PTY stand-
by mode.
by mode.
5
When a programme of the type specified starts on an ON
(other network) station, the unit will automatically switch to
the station broadcasting the selected programme type, and
"PTY" will flash.
(other network) station, the unit will automatically switch to
the station broadcasting the selected programme type, and
"PTY" will flash.
6
When the programme specified for the ON station is over,
the unit will automatically return to the original station you
were tuned to.
the unit will automatically return to the original station you
were tuned to.
Note:
●
If the EON button is pressed when "EON" is not displayed,
"NO EON" will appear for 5 seconds to indicate that the unit
cannot enter the EON stand-by mode.
"NO EON" will appear for 5 seconds to indicate that the unit
cannot enter the EON stand-by mode.
Checking the stand-by mode setting:
When in the EON stand-by mode, press the EON button.
("Programme type"
("Programme type"
→
"WAITING")
To cancel the EON stand-by mode:
When in the EON stand-by mode, press the EON button. Within
4 seconds, press it again. The EON stand-by mode will be can-
celled.
4 seconds, press it again. The EON stand-by mode will be can-
celled.
●
"PTY" will go out.
About the PTYI (Dynamic PTY Indicator):
PTYI (Dynamic PTY Indicator) will appear whilst the Dynamic
PTY station is being received.
Dynamic PTY indicates that the PTY for the station tuned in, or
the PTY referenced in the EON data, is assessed whenever the
programme changes and may be changed.
PTYI (Dynamic PTY Indicator) will appear whilst the Dynamic
PTY station is being received.
Dynamic PTY indicates that the PTY for the station tuned in, or
the PTY referenced in the EON data, is assessed whenever the
programme changes and may be changed.
PTYI
Meaning
Lights up
Tuned into a dynamic PTY station.
Goes out
Tuned into a static PTY.
Note:
●
When "PTYI" appears, if you press the DISPLAY MODE but-
ton to display the programme type, you can check the type
of programme you are actually receiving.
ton to display the programme type, you can check the type
of programme you are actually receiving.
(Main unit operation)
CD-C621H(SUK) TINSE0245AWZZ
21
<P=002>
(Continued)
2
3
4
■
EON-TI
1
Tune in the desired RDS station (when a station name is
being displayed).
being displayed).
2
Press the EON button when "EON" appears.
●
"PTY TI" and "SELECT" will appear alternately for about 6
seconds.
seconds.
3
Whilst they are being displayed, select the TI (Traffic Infor-
mation) using the PRESET
mation) using the PRESET
X
or PRESET
W
button.
●
The selected "TI" will flash.
4
Within 4 seconds, press the PTY.TI SEARCH button.
●
"TI" and "WAITING" will appear for 2 seconds each.
●
"TI" will appear, and the unit will enter the EON-TI stand-by
mode.
mode.
5
When a TA specifed starts on a other network station, the
unit will automatically switch to that station, and "TI" will flash.
unit will automatically switch to that station, and "TI" will flash.
6
When the traffic announcement is over, the unit will automat-
ically return to the original station you were tuned to.
ically return to the original station you were tuned to.
Note:
●
If the EON button is pressed when "EON" is not displayed,
"NO EON" will appear for 5 seconds to indicate that the unit
cannot enter the EON stand-by mode.
"NO EON" will appear for 5 seconds to indicate that the unit
cannot enter the EON stand-by mode.
Checking the stand-by mode setting:
When in the EON stand-by mode, press the EON button.
("TI"
("TI"
→
"WAITING")
To cancel the EON stand-by mode:
When in the EON stand-by mode, press the EON button. Within
4 seconds, press it again. The EON stand-by mode will be can-
celled.
4 seconds, press it again. The EON stand-by mode will be can-
celled.
●
"TI" will go out.
Note:
●
If neither "TP" nor "TA" appear, then even if "EON" appears
the unit cannot enter the EON-TI stand-by mode. In this con-
dition, if the PTY.TI SEARCH button is press after TI is se-
lected, "NO TI" will flash for 4 seconds.
the unit cannot enter the EON-TI stand-by mode. In this con-
dition, if the PTY.TI SEARCH button is press after TI is se-
lected, "NO TI" will flash for 4 seconds.
5
4
3
2
1
About the TP and TA indicators
TP indicator
TA indicator
Meaning
Not lit
Not lit
This programme does not carry traffic announcements nor
does it refer, via EON, to a programme that does.
does it refer, via EON, to a programme that does.
Not lit
Lit
This programme carries EON information about another pro-
gramme which gives traffic information.
gramme which gives traffic information.
Lit
Not lit
This programme carries traffic announcements but none are
being broadcast at present and may also carry EON informa-
tion about other traffic announcements.
being broadcast at present and may also carry EON informa-
tion about other traffic announcements.
Lit
Lit
A traffic announcement is being broadcast on this programme
at present.
at present.
(Main unit operation)
CD-C621H(SUK) TINSE0245AWZZ
22
<P=003>
(Continued)
TAPE 1
TAPE 2
PUSH
EJECT
PUSH
EJECT
1
2,5
6
4
3
1
6
6
3
4
2,5
In the following cases, the EON stand-by mode will be
cancelled.
cancelled.
●
Press the ON/STAND-BY button to enter the stand-
by mode.
by mode.
●
When the unit is switched to another band in the
EON stand-by mode
EON stand-by mode
●
When you change the FM station whilst in the EON
stand-by mode
stand-by mode
●
When a preset call is made
Notes:
●
During the same programme as the specified PTY
(or TA) is being broadcast on the station you are
receiving, the unit will not switch to other network
station.
(or TA) is being broadcast on the station you are
receiving, the unit will not switch to other network
station.
●
If there are more than two other network stations
you want to listen to, compare the strength of each
station’s signal and tune in the station with the stron-
gest signal. (EON-AF)
However, if the frequency of other network station
has been stored in the preset channel memory, the
unit will switch to that preset channel.
you want to listen to, compare the strength of each
station’s signal and tune in the station with the stron-
gest signal. (EON-AF)
However, if the frequency of other network station
has been stored in the preset channel memory, the
unit will switch to that preset channel.
●
If you want to cancel the reception of an ON (other network)
station which was tuned in by the EON system and return to
the original station you were receiving, press the EON button.
station which was tuned in by the EON system and return to
the original station you were receiving, press the EON button.
●
After the unit returns to the original station, the stand-by mode
will still be active. (The "TI" or "PTY" will remain lit.)
will still be active. (The "TI" or "PTY" will remain lit.)
●
The unit will not switch from the ON station to another network
station. The unit returns to the original station.
station. The unit returns to the original station.
●
When the unit switches automatically to "other network" sta-
tion, if there is any problem with this station or the station
cannot be received properly "WEAK SIG" will appear and the
unit will return to the original station.
tion, if there is any problem with this station or the station
cannot be received properly "WEAK SIG" will appear and the
unit will return to the original station.
●
Even if the unit switches from the station you are listening to
directly to some "other network" station, if the signals from
the other network stations are very weak, the unit will search
for the station with the strongest signal and switch to it.
directly to some "other network" station, if the signals from
the other network stations are very weak, the unit will search
for the station with the strongest signal and switch to it.
However, if the signals from all the other network stations are
very weak, or if the tuning conditions are very bad (due to
electrical noise), the unit will stop searching, "WEAK SIG" will
be displayed, and the unit will return to the original station
you were receiving.
very weak, or if the tuning conditions are very bad (due to
electrical noise), the unit will stop searching, "WEAK SIG" will
be displayed, and the unit will return to the original station
you were receiving.
CASSETTE OPERATION
■
TAPE 1 or TAPE 2 playback
1
Press the ON/STAND-BY button to turn the power on.
2
Press the TAPE (1
V
2) button.
3
Open the cassette door by pushing the area marked "PUSH
EJECT".
EJECT".
4
Load the cassette into the TAPE 1 or TAPE 2 cassette com-
partment.
partment.
5
With cassettes in both decks, press the TAPE (1
V
2) button
to switch operation from one deck to the other.
6
Press the
0/R
button to start playback.
●
When playback is performed using the remote control, press
the TAPE 1 or TAPE 2
the TAPE 1 or TAPE 2
0
button.
To stop playback:
Press the
■
(TAPE
■
) button.
Fast forward/rewind: (TAPE 2 only)
①
Press the
■
(TAPE
■
) button, then press the TAPE (1
V
2)
button to select TAPE 2.
②
To advance the tape, press the
2
button.
To rewind it, press the
3
button.
Caution:
●
To remove the cassette tape, press the
■
(TAPE
■
) button,
and then open the cassette compartment.
●
Before changing from one tape operation to another, press
the
the
■
(TAPE
■
) button.
●
If a power failure occurs during tape operation, the tape head
will remain engaged with the tape and the cassette door will
not open. In this case, wait until power is restored.
will remain engaged with the tape and the cassette door will
not open. In this case, wait until power is restored.
CD-C621H(SUK) TINSE0245AWZZ
23
Click on the first or last page to see other CD-C621H (serv.man2) service manuals if exist.