Sharp CD-BA250 User Manual / Operation Manual ▷ View online
9
CD-BA250H(E)1.fm
01/02/27
Ge
ne
ral Inf
o
rma
tion
- Cont
ro
ls a
n
d
Indicator
s -
„
Speaker system
1. Tweeter
2. Woofer
3. Bass Reflex Duct
4. Speaker Wire
2. Woofer
3. Bass Reflex Duct
4. Speaker Wire
Speaker grilles are removable:
Make sure nothing comes into contact with the speaker diaphragms when you
remove the speaker grilles.
remove the speaker grilles.
Placing the speaker system:
There is no distinction between the right and the left speakers.
3
4
1
2
3
Left speaker
Right speaker
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
10
CD-BA250H(E)1.fm
01/02/27
Pre
p
ar
at
ion
f
o
r U
s
e
-
S
y
s
te
m
Connections
-
System Connections
AM loop aerial
Right speaker
Left speaker
VCR, DVD, etc.
not supplied
FM aerial
Wall socket
(AC 230 V, 50 Hz)
(AC 230 V, 50 Hz)
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
11
CD-BA250H(E)2.fm
01/2/8
Pre
p
ar
at
ion
f
o
r U
s
e
-
S
y
s
te
m
Connections
-
„
Aerial connection
Note:
Placing the aerial on the stereo system or near the AC power lead may cause noise
pickup. Place the aerial away from the stereo system for better reception.
pickup. Place the aerial away from the stereo system for better reception.
Installing the AM loop aerial:
External FM aerial:
Use an external FM aerial if you require better reception. Consult your dealer.
„
Speaker connection
Connect the black wire to the minus (-) terminal, and the red wire to the plus (+) ter-
minal.
minal.
Caution:
„
Connecting the AC power lead
After checking all the connections have been made correctly, plug the AC power lead
of this unit into the wall socket. If you plug the unit first, the unit will enter the demon-
stration mode.
of this unit into the wall socket. If you plug the unit first, the unit will enter the demon-
stration mode.
Note:
Unplug the unit if it will not be used for a prolonged period of time.
Supplied FM aerial:
Connect the FM aerial wire to the FM 75
OHMS socket and position the FM aerial
wire in the direction where the strongest
signal can be received.
OHMS socket and position the FM aerial
wire in the direction where the strongest
signal can be received.
Supplied AM loop aerial:
Connect the AM loop aerial to the AM
LOOP socket. Position the AM loop aerial
for optimum reception. Place the AM loop
aerial on a shelf, etc., or attach it to a stand
or a wall with screws (not supplied).
LOOP socket. Position the AM loop aerial
for optimum reception. Place the AM loop
aerial on a shelf, etc., or attach it to a stand
or a wall with screws (not supplied).
< Assembling >
< Attaching to the wall >
Wall
Screws
(not
supplied)
External FM aerial
Right speaker
Left speaker
z
Use speakers with an impedance of 6 ohms or more, as lower impedance speakers
can damage the unit.
can damage the unit.
z
Do not mistake the right and the left channels. The
right speaker is the one on the right side when you face
the unit.
right speaker is the one on the right side when you face
the unit.
z
Do not let the bare speaker wires touch each other.
z
Do not allow any objects to fall into or to be placed in
the bass reflex ducts.
the bass reflex ducts.
z
Do not stand or sit on the speakers. You may be in-
jured.
jured.
Incorrect
Black
Red
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
12
CD-BA250H(E)2.fm
01/2/8
Pre
p
ar
at
ion
f
o
r U
s
e
- Re
mo
te
Cont
ro
l -
Remote Control
„
Battery installation
Precautions for battery use:
z
Replace all old batteries with new ones at the same time.
z
Do not mix old and new batteries.
z
Remove the batteries if the unit will not be used for long periods of time. This will
prevent potential damage due to battery leakage.
prevent potential damage due to battery leakage.
Caution:
z
Do not use rechargeable batteries (nickel-cadmium battery, etc.).
z
Installing the batteries incorrectly may cause the unit to malfunction.
Notes concerning use:
z
Replace the batteries if the operating distance is reduced or if the operation
becomes erratic.
becomes erratic.
z
Periodically clean the transmitter on the remote control and the sensor on the unit
with a soft cloth.
with a soft cloth.
z
Exposing the sensor on the unit to strong light may interfere with operation.
Change the lighting or the direction of the unit.
Change the lighting or the direction of the unit.
z
Keep the remote control away from moisture, heat, shock, and vibrations.
„
Test of the remote control
Face the remote control directly to the remote sensor on the unit.
The remote control can be used within the range shown below:
Press the ON/STAND-BY button. Does the power turn on? Now, you can enjoy the
music.
music.
Use 2 "AA" size batteries (UM/SUM-3, R6, HP-7 or similar).
Batteries are not included.
Batteries are not included.
1 Remove the battery cover.
2 Insert the batteries according to the direction indicated in the bat-
2 Insert the batteries according to the direction indicated in the bat-
tery compartment.
When inserting or removing the batteries, push them towards the battery termi-
nals.
nals.
3 Replace the cover.
0.2 m - 6 m
(8" - 20')
(8" - 20')
Remote sensor
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
Click on the first or last page to see other CD-BA250 service manuals if exist.