Sharp CD-BA250 User Manual / Operation Manual ▷ View online
33
CD-BA250H(E)4.fm
01/2/8
T
a
pe Reco
rd
in
g
- Dubbing fr
om T
a
pe
t
o
T
a
pe -
Dubbing from Tape to Tape
You can record from TAPE 1 to TAPE 2.
For recording, use only normal tapes. Do not use metal or CrO tapes.
For recording, use only normal tapes. Do not use metal or CrO tapes.
To stop dubbing:
Press the (TAPE ) button.
TAPE 1 and TAPE 2 will simultaneously stop.
TAPE 1 and TAPE 2 will simultaneously stop.
„
Erasing recorded tapes
Note:
Make sure that the TAPE 1 is not in use.
1
Press the ON/STAND-BY button to turn the power on.
2
Load a prerecorded cassette into the TAPE 1 cassette compart-
ment. Insert a blank tape into the TAPE 2 cassette compartment.
ment. Insert a blank tape into the TAPE 2 cassette compartment.
It is recommended that the recording tape is the same length as the master tape.
3
Press the TAPE (1 2) button until "TAPE 1" appears on the dis-
play.
play.
4
Press the REC PAUSE
(
) button.
Recording will be paused.
5
Press the / button on the main unit or the TAPE 2 button on
the remote control to start dubbing.
the remote control to start dubbing.
1
Load the tape to be erased into the TAPE 2 cassette compartment with the side to
be erased facing toward you.
be erased facing toward you.
2
Press the TAPE (1 2) button until "TAPE 2" appears on the display.
3
Press the REC PAUSE
(
) button.
4
Press the / button on the main unit or the TAPE 2 button on the remote con-
trol to start erasing.
trol to start erasing.
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
34
CD-BA250H(E)4.fm
01/2/8
Ad
v
a
nced Fe
atur
es
- Ti
mer
a
nd S
le
e
p Oper
a
ti
o
n
-
Timer and Sleep Operation
Timer playback:
The unit turns on and plays the desired source (CD, tuner, tape) at the preset time.
The unit turns on and plays the desired source (CD, tuner, tape) at the preset time.
Timer recording:
The unit turns on and starts recording from the tuner at the preset time.
The unit turns on and starts recording from the tuner at the preset time.
Sleep operation:
The radio, compact disc and cassette tape can all be turned off automatically.
The radio, compact disc and cassette tape can all be turned off automatically.
„
Timer playback or Timer recording
Before setting timer:
1
Press the CLOCK button to check that the clock is on time.
2
For timer playback:
Load a cassette or discs to be played.
For timer recording: Load a cassette for recording in the TAPE 2 cassette compart-
ment.
1
Press the ON/STAND-BY button to turn the power on.
2
Press the CD, TUNER (BAND) or TAPE (1 2) button to select the
desired function.
desired function.
To select the timer playback source: CD, TUNER (BAND) or TAPE (1 2).
To select the timer recording source: TUNER (BAND).
When you selected the TUNER (BAND), tune in to the desired sta-
tion.
tion.
3
Adjust the volume using the VOLUME buttons.
Do not turn the volume up too high.
4
Press the TIMER/SLEEP button repeatedly to select timer playback
or timer recording.
or timer recording.
Display the white " " for timer playback and the red " " for timer
recording.
recording.
5
Press the TUNING/TIME ( or ) button to specify the hour to start,
then press the MEMORY/SET button.
then press the MEMORY/SET button.
The illustrations show the timer playback setting.
red
white
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
35
CD-BA250H(E)4.fm
01/2/8
Ad
v
a
nced Fe
atur
es
- Ti
mer
a
nd S
le
e
p Oper
a
ti
o
n
-
To reset or change the timer setting:
Perform "Timer playback or Timer recording" from the beginning.
Notes:
„
Sleep operation
To cancel the sleep operation:
Press the ON/STAND-BY button whilst the sleep timer is set.
To confirm the remaining sleep time:
Press the TIMER/SLEEP button whilst the sleep timer is set.
The remaining sleep time is displayed for about 5 seconds.
The remaining sleep time is displayed for about 5 seconds.
Note:
Once the sleep time is set, it will remain unchanged until new time is entered.
6
Press the TUNING/TIME ( or ) button to specify the minutes,
then press the MEMORY/SET button.
then press the MEMORY/SET button.
7
The unit will enter the timer stand-by mode automatically.
To cancel the timer playback/timer recording:
Press the ON/STAND-BY button to turn the power on.
8
When the preset time is reached, playback or recording will start.
The volume will increase gradually until it reaches the volume you were listening
at before your system enters the timer stand-by mode.
at before your system enters the timer stand-by mode.
9
In timer playback:
If you select CD or TAPE, the unit will enter the stand-by mode after the play-
back. If you select TUNER, it will enter the stand-by mode one hour after the tim-
er playback starts.
back. If you select TUNER, it will enter the stand-by mode one hour after the tim-
er playback starts.
In timer recording:
When the recording tape reaches its end, the timer recording will end, and the
unit will enter the stand-by mode.
unit will enter the stand-by mode.
z
Once the time is set, the setting will be retained until a new time is entered.
z
When performing timer playback or recording using another unit connected to the
VIDEO/AUX sockets, select "VIDEO/AUX" in step 2.
At this time, only this unit will be turned on or enter the power stand-by mode auto-
matically. It will enter the power stand-by mode when the end of the recording tape
is reached in timer recording or 1 hour after the playback starts in timer playback.
However, another unit will not be turned on or off.
VIDEO/AUX sockets, select "VIDEO/AUX" in step 2.
At this time, only this unit will be turned on or enter the power stand-by mode auto-
matically. It will enter the power stand-by mode when the end of the recording tape
is reached in timer recording or 1 hour after the playback starts in timer playback.
However, another unit will not be turned on or off.
1
Play back the desired sound source.
2
Press the TIMER/SLEEP button repeatedly until "SLEEP" is dis-
played.
played.
To change the sleep time:
Whilst the sleep time is displayed, press the TUNING/TIME ( or ) button.
(Maximum: 3 hours - Minimum: 1 minute)
z
3 hours - 5 minutes 5-minute intervals
z
5 minutes - 1 minute 1-minute intervals
3
Press the MEMORY/SET button.
4
Your system will enter the power stand-by mode automatically af-
ter the preset time has elapsed.
ter the preset time has elapsed.
The volume will be turned down 1 minute before the sleep operation finishes.
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
36
CD-BA250H(E)4.fm
01/2/8
Ad
v
a
nced Fe
atur
es
- Enhancing Y
our
System
-
Enhancing Your System
The connection lead is not included. Purchase a commercially available lead as
shown below.
shown below.
„
Listening to the playback sounds from
VCR, DVD, etc.
VCR, DVD, etc.
Note:
To prevent hum interference, place this unit away from a television.
„
To record on a tape
„
Headphones
z
Before plugging in or unplugging the headphones, reduce the volume.
z
Be sure your headphones have a 3.5 mm (1/8") diameter plug and are between 16
ohms and 50 ohms impedance. The recommended impedance is 32 ohms.
ohms and 50 ohms impedance. The recommended impedance is 32 ohms.
z
Plugging in the headphones disconnects the speakers automatically. Adjust the
volume using the VOLUME buttons.
volume using the VOLUME buttons.
VCR, DVD, etc.
To the line
output sockets
output sockets
Red
Red
RCA lead
(not supplied)
(not supplied)
White
White
1
Use a connection lead to connect the VCR, DVD, etc. to the VIDEO/
AUX sockets.
AUX sockets.
When using video equipment, connect the audio output to this unit and the video
output to a television.
output to a television.
2
Press the ON/STAND-BY button to turn the power on.
3
Press the VIDEO/AUX button.
4
Play the connected equipment.
1
Insert a cassette in the TAPE 2 cassette compartment.
2
Press the VIDEO/AUX button.
3
Press the REC PAUSE
(
) button.
4
Press the / (TAPE 2 ) button.
5
Play the VCR, DVD, etc.
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
Click on the first or last page to see other CD-BA250 service manuals if exist.