Sharp AY-M09 Service Manual ▷ View online
29
AY-M09AE
AE-M18AE
AE-M18AE
7.Take the thermistor holder off from evaporator.
11.Loosen 4 screws fixing control box and take out control
ass'y.
8.Take out the thermistor from evaporator.
9.Disconnect fan motor connectors and others.
10.Loose 1 screw for a pipe cover and take it out.
Loose the earth screw.
12.Loose a screw fixing drain pan ass'y.(Right side)
13.Loose 2 screws fixing drain pan ass'y.(Left side)
14.Loose a screw fixing drain hose.
30
AY-M09AE
AE-M18AE
AE-M18AE
19.Loosen 2 screws fixing evaporator.
15.When assembling make sure that O-ring is fit to the
drain hose.
16.Take out the drain pan ass'y.
17.Loose a screw fixing cross flow fan to motor.
20.Take out the fan bearing ass'y.
21.Take out the cross flow fan while slightly lifting the
evaporator.
18.Slide the cross fan leftward to depart from the motor
shaft and take out fan motor.
O-ring
O-ring
Drain hose
(Section)
31
AY-M09AE
AE-M18AE
AE-M18AE
FOR OUTDOOR UNIT MODEL AE-M18AE
DISASSEMBLING PROCEDURE OF THE CONTROL BOX
1. Loose 2 screws fixing the left side cover.
5. Loose 2 screws fixing the cabinet.
2. Loose 2 screws fixing the cabinet.
3. Loose a screw fixing the control cover.
4. Loose 8 screws fixing the right side cover.
6. Loose a screw fixing the cabinet and remove the
cabinet.
7. Loose the screws fixing the 3 cord clamps.
8. Remove the unit-to-unit cords of unit A1, A2 and power
supply cord.
32
AY-M09AE
AE-M18AE
AE-M18AE
9. Cut nylon band.
10.Remove 4 connectors.
11.Remove the terminal cover of the 2 compressors.
12.Remove 3 terminals of the 2 compressors each.
13.Loose 3 screws fixing the control box.
14.Take out the control box.
DISASSEMBLING PROCEDURE OF THE FAN
1. Loose the fan nut and fan can be taken out.
1. Loose the fan nut and fan can be taken out.
2. Fan motor is secured by 4 screws.
Click on the first or last page to see other AY-M09 service manuals if exist.