DOWNLOAD Sharp AU-X08 (serv.man16) Service Manual ↓ Size: 2.09 MB | Pages: 60 in PDF or view online for FREE

Model
AU-X08 (serv.man16)
Pages
60
Size
2.09 MB
Type
PDF
Document
Service Manual
Brand
Device
Air Conditioner
File
au-x08-sm16.pdf
Date
PREV: Sharp AU-X08 (serv.man15) Service Manual

Sharp AU-X08 (serv.man16) Service Manual ▷ View online

33
AH/AY-X08CR
AH/AY-X10CR
AH/AY-X13CR
Figure P-7. At Heating for AY-X08CR
Figure P-8. At Heating for AY-X10CR
Figure P-9. At Heating for AY-X13CR
-5
0
7
5
10
2.4
2.8
3.2
3.6
35
40
45
700
800
900
1000
(Running frequency: 68Hz)
Heating capacity(kW)
Outside air temp.(˚C)  
Input(W)
Outlet air temp.(
˚C)
-5
0
5
7
10
2.5
3.0
3.5
4.0
30
35
40
45
800
900
1000
1100
(Running frequency: 79Hz)
Heating capacity(kW)
Outside air temp.(˚C)  
Input(W)
Outlet air temp.(
˚C)
-5
0
5
7
10
3.0
3.5
4.0
4.5
5.0
5.5
30
35
40
45
1200
1300
1400
1500
1600
(Running frequency: 96Hz)
Heating capacity(kW)
Outside air temp.(˚C)  
Input(W)
Outlet air temp.(
˚C)
34
AH/AY-X08CR
AH/AY-X10CR
AH/AY-X13CR
DISASSEMBLING PROCEDURE
FOR INDOOR UNIT [AY-X08BCR/X10CR/X13CR AND AH-X08CR/X10CR/X13CR]
CAUTION : DISCONNECT THE UNIT FROM THE POWER SUPPLY BEFORE ANY 
SERVICING
1. Open the opne panel, and remove 2 air filters.
2. Remove 4 screws fixing the front panel.
3. Remove the screw fixing the cord clamp.
Note: During reassembly, install the holder after
installing the front panel. This will make it
easier to assemble the front panel.
4. Close the open panel. Pushing the nail of the front
panel.
5. Pull the front panel up.
6. Remove the unit-to-unit wiring from the terminal
board.
7. Remove a screw fixing the control box cover, and
remove it.
8. Remove a screw fixing the ground wire.
Note: During reassembly, take care for the
direction of the lead wire.
35
AH/AY-X08CR
AH/AY-X10CR
AH/AY-X13CR
9. Remove the thermistor of the evaporator.
10. Remove 4 connectors.
11. Remove the thermistor holder from the evaporator.
12. Remove the display from the drain pan.
13. Remove the screw fixing the pipe holder.
14. Remove 3 screws fixing the control box, and remove
the control box.
15. Remove a screw fixing the drain pan.
16. Pull drain pan toward you.
CN1
CN6
CN3
CN2
36
AH/AY-X08CR
AH/AY-X10CR
AH/AY-X13CR
17. Remove the drain cover from the evaporator.
Note: During reassembly, verify that the dew on
the pipe is led to the drain pan.
18. Remove 4 screws fixing the evaporator.
19. Remove the evaporator from the cabinet.
20. Remove 2 screws fixing the motor cover, and pull up
the fan.
21. Loose a screw fixing fan.
[Cautionary points for assembling the fan]
a. When inserting the motor shaft into the metal fan
boss, take care to prevent injuring the inner surface of
the metal fan boss.
b. Before fastening the motor shaft and fan, insert the
motor shaft into contact with the bottom of the metal
fan boss.
Fan motor
Motor shaft
Fan boss
Cross flow fan
Page of 60
Display

Click on the first or last page to see other AU-X08 (serv.man16) service manuals if exist.

RANDOM: