DOWNLOAD Panasonic TX-L47WT60Y / TX-LR47WT60 Service Manual ↓ Size: 18.36 MB | Pages: 119 in PDF or view online for FREE

Self-check indication only: 
While pressing [VOLUME ( - )] button on the main unit, press [OK] button on the remote control. 
 
Self-check indication and forced to factory shipment setting: 
While pressing [VOLUME ( - )] button on the main unit, press [MENU] button on the remote control for more than 3 seconds. 

Switch off the power with the [POWER] button on the main unit. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 

 
 
 
                           
 

 

Display Ref. 

No. 

Description 

P.C.B. 

H14TUN TU6708 

Tuner 

DVB-A/T/T2/C  A-Board 

H90STBY IC8000 

IC 

Peaks-Pro4 

A-Board 

H91MEM2 IC8900 

Flash 

Memory 

A-Board 

H30AVSW IC3000 

AV 

switch 

A-Board 

H17LAN IC8900 

MAC 

A-Board 

H00FE 

IC6800 / IC6831 

DVB-T2/T/C Demodulator 

A-Board 

H00SAT-TU TU6707 

Tuner 

DVB-S/S2 

A-Board 

H96ID IC8900 

CI+, 

DTCP-IP, One To One 

A-Board 

H97ID2 

IC8900 

 Netflix, Widewine, HDCP2 

A-Board 

H45BT 

IC8000 / IC8458 

N5HZZ0000130 

IC Peaks-Pro4 / USB HUB 

BT DONGLE 

A-Board 

BT Dongle 

H42WiFi 

IC8000 / IC8458 

N5HBZ0000102 

IC Peaks-Pro4 / USB HUB 

WIFI DONGLE 

A-Board 

Wifi Dongle 

H21DSP 

IC4900 

Audio Amplifier with DSP 

A-Board 

H52CAMERA N5ZZ00000289 

CAMERA 

(Skype) 

Camera 

Module 

If the CCU ports have been checked and found to be incorrect or not located then " - - " will appear in place of "O.K.".

47FHD                                                                           

            

                                           

  Self Check Complete

H14TUN  

 

          OK 

H90STBY        OK 
H91MEM2       OK 
H30AVSW       OK 
H17LAN         OK 
H00FE                   OK 
H00SAT-TU       OK 
H96ID                     OK 
H97ID2                 OK 
H45BT                   OK  
H42WiFi               OK 
H21DSP         OK 
H52CAMERA   OK 

PEAKS-SOFT                 3.838
PEAKS-EEP             01.10.0056 
LSI-PACKAGE                               0.023 
LSI-RELEASE                                   0.20 
STBY-SOFT                                 1.01.02 
STBY-EEP               1.01.315d 
GCX                                e1010021 
CAMERA DATA                   1.0055 

   
 
 
    MODEL ID                                               0A 
                             03000113 
                             00000400

 

 
  

 

47FHD                                                                           

            

                                           

  Self Check Complete

H14TUN  

 

          OK 

H90STBY        OK 
H91MEM2       OK 
H30AVSW       OK 
H17LAN         OK 
H00FE                   OK 
H00SAT-TU       OK 
H96ID                     OK 
H97ID2                 OK 
H45BT                   OK  
H42WiFi               OK 
H21DSP         OK 
H52CAMERA   OK 

PEAKS-SOFT                 3.838
PEAKS-EEP             01.10.0072 
LSI-PACKAGE                               0.023 
LSI-RELEASE                                   0.20 
STBY-SOFT                                 1.01.02 
STBY-EEP               1.01.315d 
GCX                                e1010021 
CAMERA DATA                   1.0055 

   
 
 
    MODEL ID                                               0A 
                             03000115 
                             00000400

 

 
  

 

4 sec 

Once 

 
1. Subject 

Information of LED Flashing timing chart. 

 
2. Contents 

When abnormality has occurred the unit, the protection circuit operates and reset to the stand by mode. At this time, the 
defective block can be identified by number of blinking of the Power LED on the front panel of the unit. 

 
 

Blinking 

times 

Blinking timing 

Contents 

Check point 

1  

BL_SOS 

 

TC BOARD 
LD BOARD 

3 

 

IROM SOS 

 

A BOARD 

 

7 

 

SUB3.3V/1.2V 

 

A BOARD 

 

8 

 

SOS 

 

A BOARD 

PANEL 

9 

 

SOUND_SOS 

 

A BOARD 

 

10 

 

FRC_SOS FR 

BOARD 

12 

 

BE_SOS  

A BOARD 

13 

 

EMERGENCY  

A BOARD 

 

To find the possible failure point where in LCD Panel or Printed Circuit Board when the abnormal picture is displayed. 
 

While pressing [VOLUME ( - )] button of the main unit, press [YELLOW] button of the remote control three times. 
 

Switch off the power with the [POWER] button on the main unit or the [POWER] button on the remote control. 
 

If the abnormal picture is displayed, go into LCD Panel test mode to display the several test patterns. 
And then, judge by the following method. 
Still abnormal picture is displayed: The cause must be in LCD Panel. 
Normal picture is displayed: The cause must be in A board. 
 

The test pattern is created by the circuit in LCD Panel. 
In LCD Panel test mode, this test pattern is displayed unaffected by signal processing for RF or input signal. 
If the normal picture is displayed, LCD Panel must be okay and the cause of failure must be in A board. 

No Light 

Light 

 

1. Remote 

controller 

2.  LCD WB meter (Minolta CA-210 or equivalent) 
3. Comunication 

jig 

4.  Computer for external control 

 

Correlation can be also taken by 
CS-1000A or equivalent 

1.  Procedure basically performs checking using the production software and 

make automatic adjustment using external computer. 

2.  It adjusts in the mode of:  Colour balance Normal 
                                                 Viewing Mode Dynamic 
 
                                                
                                           
                                                       Normal                                                                 
        Highlight                         x: 0.293 

 0.010                                                    

                                             y:  0.308 

 0.010                   

 
                                                      Normal                                                                
          Lowlight                        x: 0.293 

 0.010                                                      

                                               y: 0.308 

 0.010                                              

 

 

Let the panel standfor more than 3 
hours at more than 20 

C. 

Basically perform adjustment in the 
ambient environment of room 
temperature more than 20 

C. 

The aging time is more than 20 min 
at above room temperature. 
 
Applied signal 
 
100% full colour bar 
0.7V p-p white peak 
85% modulation 
 
 
100% WHITE 
 
 
 
 50% GRAY