Panasonic TX-L47WT60Y / TX-LR47WT60 Service Manual ▷ View online
Specifications
Power
Source:
220-240V AC, 50 / 60Hz
Rated Power Consumption:
186W
Stand-by Power Consumption: 0.20W
Aerial Impedance: 75
unbalanced, Coaxial Type
Receiving System:
L47WT60Y
DVB-S/S2 Digital satellite services
(MPEG2 and MPEG4-AVC(H.264))
Receiver frequency range:950MHz to2,150MHz
DiSEqC – Version 1.0.
DVB-T/T2 Digital terrestrial services (
MPEG2 and MPEG4-AVC(H.264)
)
DVB-C
Digital cable services (
MPEG2 and MPEG4-AVC(H.264)
)
PAL I/H, B/G,
SECAM B/G, L/L’
VHF E2-E12 VHF H1-H2 ( ITALY )
VHF A-H ( ITALY ) UHF E21-E69
CATV (S01-S05) CATV S1-S10(M1-M10)
CATV S11-S20 (U1-U10) CATV S21-S41 (HYPERBAND)
PAL D/K,
SECAM
D/K
VHF R1-R2 VHF R3-R5
VHF R6-R12 UHF E21-E69
PAL 525/60 (AV only)
M.NTSC (AV only)
NTSC (AV only)
LR47WT60
DVB-S/S2 Digital satellite services
(MPEG2 and MPEG4-AVC(H.264))
Receiver frequency range:950MHz to2,150MHz
DiSEqC – Version 1.0.
DVB-T/T2 Digital terrestrial services (
MPEG2 and MPEG4-AVC(H.264)
)
DVB-C
Digital cable services (
MPEG2 and MPEG4-AVC(H.264)
)
PAL D/K,
SECAM
D/K
VHF R1-R2 VHF R3-R5
VHF R6-R12 UHF E21-E69
PAL 525/60 (AV only)
M.NTSC (AV only)
NTSC (AV only)
Satellite dish input:
Female F-type 75
x 2
Aerial - Rear:
VHF/UHF
Operating Conditions:
Temperature: 0°C
35°C
Humidity:
20%
80% RH (non condensing)
Terminals:
AV1 IN
Video (21 pin)
1V p-p 75
Audio (21 pin)
500mV rms 10k
RGB (21 pin)
0.7V p-p 75
AV1 OUT
Video (21 pin)
1V p-p 75
Audio (21 pin)
500mV rms 1k
AV2 IN
Video (RCAx1)
1V p-p 75
(COMPONENT/VIDEO)
Audio (RCAx2)
500mV rms 10k
(used for HDMI_ AV2 audio IN)
Video (RCAx3)
Y:1V p-p 75
(including synchronization)
Pb, Pr: ±0.35V p-p 75
HDMI1, HDMI2, HDMI3
Type A Connectors
HDMI
1/3 : 3D, Content Type, Deep Colour
HDMI 2 : 3D, Content Type, Audio Return Channel, Deep Colour
This TV supports “HDAVI Control 5” function.
DIGITAL AUDIO OUT
PCM / Dolby digital / DTS, Fiber optic
9
USB 1/2/3
USB1/2: USB 2.0 DC 5V Max 500mA
USB3 : USB 3.0 DC 5V Max 900mA
ETHERNET
RJ45, IEEE802.3 10BASE-T / 100BASE-TX
CARD SLOT
SD Card slot x1
Common interface slot (Complies with CI+) x 2
Wireless LAN:
L47WT60Y
Standard Compliance
IEEE802.11a/n , IEEE802.11b/g/n
Frequency Range
IEEE802.11a/n: 5.180 GHz – 5.320 GHz
5.500 GHz – 5.580 GHz
5.660 GHz – 5.700 GHz
IEEE802.11b/g/n: 2.412 GHz – 2.472 GHz
Security
WPA2-PSK
(TKIP/AES)
WPA-PSK
(TKIP/AES)
WEP(64
bit/128
bit)
LR47WT60
Standard Compliance
IEEE802.11a/n , IEEE802.11b/g/n
Frequency Range
IEEE802.11a/n: 5.15 GHz – 5.35 GHz
5.47 GHz – 5.85 GHz
IEEE802.11b/g/n: 2.40 GHz – 2.4835 GHz
Security
WPA2-PSK
(TKIP/AES)
WPA-PSK
(TKIP/AES)
WEP(64
bit/128
bit)
Build-in Camera:
Lens
F2.0 Lens; FOV (D) 50.9° (in HD mode)
Focus
Fixed
focus
Resolution
1,280
x
720
Bluetooth Wireless
technology:
Standard Compliance:
Bluetooth 3.0
Frequency Range
2.402 GHz – 2.480 GHz
3D
Eyewear:
Dimensions (W x H x D)
165mm x 38m x 166mm
Mass
18g
Usage Temperature Range
0°C
40°C
Materials
Main body / Lens section: Resin
LCD screen:
L5EDDYY00497
1920 x 1080, 16:9
Visible Diagonal 1190mm
Speaker:
8 train speakers x 2, Woofer (Ø 75mm) x 1
Audio
Output:
18W (4W + 4W + 10W)
Headphones:
3.5mm,
8
Impedance
Accessories supplied :
Remote Control
Touch
Pad
Controller
3D
Glasses
4 x R6 (UM3) Batteries
SCART
Cable
AV
Cable
Dimensions:
Width:
Height: Depth:
Including TV stand
1,057mm 717mm 358mm
TV set only
1,057mm 621mm 32mm
Mass:
Including TV stand
16.5kg
TV set only
12.5kg
Design and Specifications are subject to change without notice. Mass and dimensions shown are approximate.
This equipment complies with the EMC standards listed below:
EN55013, EN61000-3-2, EN61000-3-3, EN55020, EN55022, EN55024
10
Technical Description
Specification of KEY for CI Plus, DTCP-IP, One-to-One, Netflix, Widewine and HDCP
General information:
General information:
1. NAND FLASH (IC8900) for spare parts has the seed of KEY for each.
2. The final KEY data will be generated by Pro4 IC (IC8000) when SELF CHECK was done and are stored in both
Pro4 IC (IC8000) and NAND FLASH (IC8900).
All KEYs are not generated for all models.
The necessary KEY are only generated and stored depend on the feature of models.
2. The final KEY data will be generated by Pro4 IC (IC8000) when SELF CHECK was done and are stored in both
Pro4 IC (IC8000) and NAND FLASH (IC8900).
All KEYs are not generated for all models.
The necessary KEY are only generated and stored depend on the feature of models.
Replacement of ICs:
When Pro4 IC (IC8000) is replaced, NAND FLASH (IC8900) should be also replaced with new one the same time.
When NAND FLASH (IC8900) is replaced, Pro4 IC (IC8000) is not necessary to be replaced the same time.
After the replacement of IC, SELF CHECK should be done to generate the final KEY data.
How to SELF CHECK: While pressing [VOLUME ( - )] button on the main unit, press the MENU button on the remote
control for more than 3 seconds.
TV will be forced to the factory shipment setting after this SELF CHECK.
When NAND FLASH (IC8900) is replaced, Pro4 IC (IC8000) is not necessary to be replaced the same time.
After the replacement of IC, SELF CHECK should be done to generate the final KEY data.
How to SELF CHECK: While pressing [VOLUME ( - )] button on the main unit, press the MENU button on the remote
control for more than 3 seconds.
TV will be forced to the factory shipment setting after this SELF CHECK.
Model and Keys:
USB HDD Recording:
General information:
General information:
Digital TV programmes can be recorded in USB HDD.
A One-to-One key generated in A-board by SELF CHECK binds TV and USB-HDD for communication.
That key is only one key for them. If the key is difference, TV can not access USB-HDD.
Caution:
New key will be generated by following SELF CHECK and previous TV programmes recorded in USB HDD will not be
viewed.
SELF CHECK: While pressing [VOLUME ( - )] button on the main unit, press the MENU button on the remote control for more
than 3 seconds.
A One-to-One key generated in A-board by SELF CHECK binds TV and USB-HDD for communication.
That key is only one key for them. If the key is difference, TV can not access USB-HDD.
Caution:
New key will be generated by following SELF CHECK and previous TV programmes recorded in USB HDD will not be
viewed.
SELF CHECK: While pressing [VOLUME ( - )] button on the main unit, press the MENU button on the remote control for more
than 3 seconds.
Keys
Model No.
CI PLUS
DTCP-IP
One-to-One
(for USB Rec.)
Netflix
Widewine
HDCP
TX-L47WT60Y Yes Yes Yes
Yes
Yes
TX-LR47WT60 Yes No Yes
Yes
Yes
11
Setting Inspection
Voltage Confirmation
A board
Description Test
point
Voltage
P15V
TP4003 / TP4004
15.07V – 16.65V
STB5.8V
TP2017 / TP5205
5.05V - 5.59V
STB3.3V
TP5002
3.12V – 3.45V
STB1.1V
TP5003
1.08V – 1.20V
SUB9V
TP5004
8.52V – 9.42V
SUB5V
TP5420
4.91V - 5.43V
SUB3.3V
TP5400
3.16V – 3.50V
SUB1.8V
TP8714
1.76V – 1.94V
SUB1.5V
TP8101
1.39V – 1.53V
SUB1.1V
TP8100
1.08V – 1.20V
USB5V
TP5440
4.94V – 5.46V
SD3.3V
TP8671
3.20V – 3.54V
M3.3V
TP8492
3.14V – 3.48V
M1.2V
TP8406
1.14V – 1.26V
HDMI3.3V
TP8701
3.16V – 3.50V
SUB_AI_3.3V
TP2002
3.16V – 3.50V
SAT_2.5V
TP5705
2.37V – 2.63V
SAT_1.2V
TP5703
1.23V – 1.37V
DMD_1.2/1.1V
TP5702
1.11V – 1.23V
P board
Description Test
point
Voltage*
Voltage**
40V (PANEL)
TP7401 and GND TP7413
<43V
40V ± 3V
16V
TP7410 and GND TP7413
<1V
15.7V ± 0.6V
5VS
TP7501 and GND TP7413
5.3V ± 0.2V
5.3V ± 0.2V
VLED
TP7409 and GND TP7805
<43V
84V ± 5V
PFC
TP7202 and GND TP7203***
<340V
390V ± 15V
* Connect AC 230V to JK7101 connector
** Connect DC 5V to TV_SUB_ON P2 connector – pin 8 /TP7416/ from voltage divider.
***Beware, for testing of PFC use the GND (TP7203) in Hot area of P board – risk of electric shock!
12
Click on the first or last page to see other TX-L47WT60Y / TX-LR47WT60 service manuals if exist.