Panasonic TX-L32X3E / TX-LR32X3 Service Manual ▷ View online
Chassis Board Layout
Location of Lead Wiring
To find the Part Number of required wire in Replacement Parts List click on the wire name in red box.
Board Name
Function
A-Board
AV Terminal, HDMI, Digital Audio Out, SD Card, CI slot,
TV tuner, Peaks_sLD2, AV Switch, Speaker out,
EEPROM, Flash Memory, DDR SDRAM
KA-Board
Remote Receiver, Power and Timer LED, C.A.T.S
P-Board
Main Input, Power Supply, Key Control, Power Switch
LD-Board LED
Driver
LD-BOARD
P-BOARD
KA-BOARD
A-BOARD
A15
SP_L
A12
KA10
A09
SP_R
P4
A10-KA10 WIRE
P4-LD4 WIRE
A12-SPK WIRE
P1
A09-P2 WIRE
LVDS FFC
A10
P2
LD4
LD2
9
Technical Description
Specification of KEY for CI Plus, DTCP-IP and One-to-One
General information:
General information:
1. EEPROM (IC8902) for spare parts has the seed of KEY for each.
2. The final KEY data will be generated by sLD2 IC (IC8000) when SELF CHECK was done and are stored in both sLD2 IC
(IC8000) and EEPROM (IC8902).
Three KEY are not generated for all models.
The necessary KEY are only generated and stored depend on the feature of models.
2. The final KEY data will be generated by sLD2 IC (IC8000) when SELF CHECK was done and are stored in both sLD2 IC
(IC8000) and EEPROM (IC8902).
Three KEY are not generated for all models.
The necessary KEY are only generated and stored depend on the feature of models.
Replacement of ICs:
When sLD2 IC (IC8000) is replaced, EEPROM (IC8902) should be also replaced with new one the same time.
When EEPROM (IC8902) is replaced, sLD2 IC (IC8000) is not necessary to be replaced the same time.
After the replacement of IC, SELF CHECK should be done to generate the final KEY data.
How to SELF CHECK: While pressing [VOLUME ( - )] button on the main unit, press the STATUS button on the remote
control for more than 3 seconds.
TV will be forced to the factory shipment setting after this SELF CHECK.
When EEPROM (IC8902) is replaced, sLD2 IC (IC8000) is not necessary to be replaced the same time.
After the replacement of IC, SELF CHECK should be done to generate the final KEY data.
How to SELF CHECK: While pressing [VOLUME ( - )] button on the main unit, press the STATUS button on the remote
control for more than 3 seconds.
TV will be forced to the factory shipment setting after this SELF CHECK.
Model and Keys:
Keys
Model No.
CI PLUS
DTCP-IP
One-to-One
(for USB Rec.)
TX-L32X3E Yes
None
None
TX-LR32X3 None
None
None
10
Setting Inspection
Voltage Confirmation
A board
Description Test
point Voltage
SUB3.3V
TP8615
3.21V - 3.45V
SUB 1.5 V
TP8101
1.47V - 1.56V
SUB1.2V
TP8100
1.26V – 1.33V
SUB5V
CN0102 /pin1/
4.8V – 5.2V
P board
Description Test
point Voltage*
Voltage**
24V (PANEL)
TP7514 / TP7515
<1V
24V ± 1.2V
16V TP7503
/
TP7504
<1V
16.1V ± 0.7V
TUNER5V8
TP7502 / TP7501
5.7V ± 0.3V
5.7V ± 0.3V
PFC
TP7201 and GND TP7203
<340V
400V ± 15V
* Connect AC 230V to P1 connector
** Connect DC 2.5V to TV_SUB_ON P2 connector – pin 8 /TP7505/ from voltage divider.
11
Self Check
Self-check is used to automatically check the bus lines and hexadecimal code of the TV set. To enter Self-Check mode, keep
pressing the down (-/v) button on the TV set and press the STATUS button on the remote control. To exit Self Check,
switch off the TV set at the power button.
* Displayed for E model only
pressing the down (-/v) button on the TV set and press the STATUS button on the remote control. To exit Self Check,
switch off the TV set at the power button.
* Displayed for E model only
Display Ref.
No.
Description
P.C.B.
TUN TU4801
TUNER
A-Board
STBY IC8000
Peaks-sLD2
A-Board
MEM1 IC8901
STM
EEPROM
A-Board
MEM2
IC8902
EEPROM PEAKS sLD2
A-Board
AVSW IC3001 AUDIO
VIDEO SWITCH
A-Board
T-CON-EEP IC8000
SLD2
A-Board
T-CON-DCDC IC4150
DC/DC
CONVERTER
A-Board
T-CON-DAC IC4120
TCON
GAMMA
DAC
A-Board
*ID
IC8902
EEPROM PEAKS sLD2
A-Board
If the CCU ports have been checked and found to be incorrect or not located then " - - " will appear in place of "O.K.".
TX-L32X3E
32HD Panasonic 2011LCD
Self Check Complete
TUN
O.K.
STBY O.K.
MEM1 O.K.
MEM2 O.K..
AVSW O.K.
T-CON-EE O.K.
T-CON-DCDC O.K.
T-CON-DAC O.K.
ID O.K.
MEM1 O.K.
MEM2 O.K..
AVSW O.K.
T-CON-EE O.K.
T-CON-DCDC O.K.
T-CON-DAC O.K.
ID O.K.
PEAKS-SOFT 1.112
PEAKS-EEP 01.00.0010
LSI-PACKAGE 1.71e
LSI-RELEASE 1.01
STBY-SOFT 1.00.00
STBY-EEP 1.00.0000
STBY-ROMCORR 0.00.00
PEAKS-EEP 01.00.0010
LSI-PACKAGE 1.71e
LSI-RELEASE 1.01
STBY-SOFT 1.00.00
STBY-EEP 1.00.0000
STBY-ROMCORR 0.00.00
SUM C5B6
MODEL ID 08
03476100
00000004
TX-LR32X3
32HD Panasonic 2011LCD
Self Check Complete
TUN
O.K.
STBY O.K.
MEM1 O.K.
MEM2 O.K..
AVSW O.K.
T-CON-EEP O.K.
T-CON-DCDC O.K.
T-CON-DAC O.K.
MEM1 O.K.
MEM2 O.K..
AVSW O.K.
T-CON-EEP O.K.
T-CON-DCDC O.K.
T-CON-DAC O.K.
PEAKS-SOFT 1.112
PEAKS-EEP 01.00.0012
LSI-PACKAGE 1.71e
LSI-RELEASE 1.01
STBY-SOFT 1.00.00
STBY-EEP 1.00.0000
STBY-ROMCORR 0.00.00
PEAKS-EEP 01.00.0012
LSI-PACKAGE 1.71e
LSI-RELEASE 1.01
STBY-SOFT 1.00.00
STBY-EEP 1.00.0000
STBY-ROMCORR 0.00.00
SUM C4CD
MODEL ID 08
034c6100
00000004
12
Click on the first or last page to see other TX-L32X3E / TX-LR32X3 service manuals if exist.