Panasonic TX-43P15X / TX-43P15H / TX-43P15HQ / TX-43P15HZ / TX-51P15X / TX-51P15H / TX-51P15HQ / TX-51P15HZ (serv.man2) Service Manual ▷ View online
- 25 -
Digital Convergence Adjustment Procedure
START
Same time
Push : volume (TV)
: Recall (Remocon)
Set the Data of
S-CONVERGENCE
GH=0
S-CONVERGENCE
GH=0
RH=0
BH=0
GV=0
RV=0
BV=0
Set
Market Mode
Market Mode
Push : 1 or 2 (Remocon)
(many times)
(many times)
Selet
Market Mode:CHK4
Market Mode:CHK4
Selet
S-CONVERGENCE
(Static Convergence)
S-CONVERGENCE
(Static Convergence)
Push : 3 or 4 (Remocon)
(many times)
(many times)
Push : Volume + or -
(Remocon)
(Remocon)
1 2 3
1
2
3
1 2 3
1
2
3
S CONVERGENCE
CONVERGENCE
NEXTN
Push Volume "+" or "-"
Push
"N"
"N"
Push "N"
Push
"N"
"N"
Adjust GH and GV data by pushing cursor UP/Down
and Left/Right button to zero for G, R, B.
and Left/Right button to zero for G, R, B.
CHK4
GREEN
0
GH
0
GV
1 2 3
1
2
3
CONVERGENCE
NEXTN
RED
RH 0
0
RV
1 2 3
1
2
3
CONVERGENCE
NEXTN
BLUE
BH 0
BV 0
BV 0
1
2
3
4
A
- 26 -
A
R-POINT
CURSOR
CURSOR
LSI
MODE
MODE
Push : 0 (Remocon)
TEST POS ADJ
(Test Pattern Phase
Adjustment)
(Test Pattern Phase
Adjustment)
Adjust the cusor
over the center of a
monoscope pattern
over the center of a
monoscope pattern
Push : N (Remocon)
Push : STILL (Remocon)
Push : STILL
Push : TV/AV (Remocon)
Push : TV/AV (Remocon)
P CONVERGENCE
Convergence Adjustment panel
R-POINT
CURSOR
Vol "-" or Vol "+"
CHK4
TESTPOS ADJ
H : hh
V : hh
V : hh
Position
Buttons
Buttons
CURSOR
Center of
Monoscope Pattern
Monoscope Pattern
1. Push the "STILL" button to display the monoscope pat
tern on the screen.
2. Adjust the position buttons so that the cursor in the cen
ter of the test patter n is aligned with the center of the
monoscope patter n.
monoscope patter n.
Push : Volume + or -
(Remocon)
(Remocon)
Selet
P-CONVERGENCE
(Point Convergence)
P-CONVERGENCE
(Point Convergence)
B
- 27 -
B
OSD POS ADJ
TV/AV
STORE
YES : N
NO : OTHER
YES : N
NO : OTHER
Push : MAIN MENU
(Remocon)
(Remocon)
Store Data
Push : N (Remocon)
C
1. Adjust the position buttons so that the cross-cursor is
aligned near cross-bar.
DATA PHASE ADJ
Push : STILL
Adjust the Height
Rese Point
Rese Point
DATA PHASE ADJ
H : hh
Height rise point
Position
Buttons
Buttons
1. Push the "STILL" button and close the backgr ound
image ( monoscope patter n ).
2. Use the "
" and "
" of the position buttons so that
the bump in the screen center line is at the center of the
cursor.
cursor.
- 28 -
C
R-POINT
CURSOR
CURSOR
1
2
3
4
5
Push : 0 (Remocon)
<Green Convergence Adjustment>
Align Raster Using
G-LINE
G-LINE
Adjustment
Color : green
Color : green
Push : Surround (Remocon)
(many times)
(many times)
R-LINE
CURSOR
CURSOR
G-LINE
CURSOR
CURSOR
Push : TV/AV (Remocon)
Push : PIP (Remocon)
D
G-LINE
CURSOR
G-LINE
DATA
[
]
Position
Buttons
Buttons
Green crosshatch patter n
Convergence Adj. sheet lines
(Adjust points = All cross points)
1. Use the Position Buttons to adjust each point (line) so
that the Green Crosshatch Pattern is aligned with the
vertical and horizontal lines of the Convergence Adjust
ment Sheet.
vertical and horizontal lines of the Convergence Adjust
ment Sheet.
2. Push the "SOUND MUTE [
]" and swith from "G-
LINE DATA" to "G-LINE CURSOR".
3. Repeat step 1~3 to adjust the vertical lines (13) and
the horizontal lines (9).
Click on the first or last page to see other TX-43P15X / TX-43P15H / TX-43P15HQ / TX-43P15HZ / TX-51P15X / TX-51P15H / TX-51P15HQ / TX-51P15HZ (serv.man2) service manuals if exist.