Panasonic TX-43P15X / TX-43P15H / TX-43P15HQ / TX-43P15HZ / TX-51P15X / TX-51P15H / TX-51P15HQ / TX-51P15HZ (serv.man2) Service Manual ▷ View online
- 5 -
Disassembly for Service
! &
This flowchart indicates disassembly items of the cabinet parts and circuit boards in order to find the items necessary for
servicing, when reassembling, perform the procedures in the reverse order.
servicing, when reassembling, perform the procedures in the reverse order.
Top Cabinet
Screen
Rear Cover (Bottom)
Rear Cover (Top)
Speaker Grille
Speaker Ass'y
Ornament Panel
CRT Ass'y
DY, VM coil
Remove CRT Board
(LR, LG, LB) from
CRT,Connector
(LR, LG, LB) from
CRT,Connector
Main Chassis
A/X/D/C
W/R/H/Y/B/T
W/R/H/Y/B/T
+
Mirror
G-Board
CRT Lens
- 6 -
Ornament Panel
1.
The Ornament Panel is secured by (3) striker pins. Grip
the Ornament Panel at the side corner pull to remove.
the Ornament Panel at the side corner pull to remove.
Cabinet ( Top )
1.
Remove (11) Screws.
Speaker Grille
1.
Remove (2) screws.
Speaker Ass’s
1.
Remove (10) screws.
Ornament Panel
(11) Screws
Top Cabinet
(11) Screws
(2) Screws
Speaker Grille
(10) Screws
Note:
Board ground wires may have to be disconnected to disassemble some boards. All ground wires must be reconnected
using jumper leads if necessary before power is applied to Receiver for service.
using jumper leads if necessary before power is applied to Receiver for service.
- 7 -
Screen
1.
Remove (14) screws.
Mirror
1.
Remove (4) screws
.
2.
Remove (8) screws.
Rear Cover (Top)
1.
Remove (4) screws.
2.
Remove (2) screws.
Rear Cover (Bottom)
1.
Remove (18) screws.
2.
Remove (1) screws
.
Screen Frame (R)
Screen Frame (L)
Top Cabinet
Screen Frame (Top)
Screen Frame (Bottom)
(14) Screws
Screen Lenticular Lens
Screen Fresnel Lens
Screen Fresnel Lens
Front Side
Part No. Lavel
Mirror (Rear View)
(4) Screws
Rear Cover (Top)
Mirror (Rear View)
(8) Screws
(4) Screws
Top Cabinet
Screw
(18) Screws
AC Cord Cover
(1) Screw
plate
Rear Cover
(Bottom)
(Bottom)
- 8 -
Service Hints
Service position for Main chassis
1.
Remove the Rear Cover (Bottom) by removing (19)
screws around its perimeter.
screws around its perimeter.
2.
Remove lead wires and bundles from holders as neces-
sary.
sary.
3.
Pull out main chassis and stand it.
Service Position for X/C/W/R/H/Y/B/T
-Board
-Board
1.
Remove the each circuit board from A or D-Board.
2.
Connect extension cables between individual circuit
board and A or D-Board.
board and A or D-Board.
Note:
Extension cable kit is supplied as service fixtures
and tools. ( Part No. TZS709010 )
and tools. ( Part No. TZS709010 )
Service Position for G-Board
1.
Remove the Top Cabinet Ass’y.
2.
Remove G-Board by removing (3) screws.
A
D
Main chasisis
B
H
R T W
C
D
X
PA/PB
Y
G-Board
(3) Screws
(3) Screws
Click on the first or last page to see other TX-43P15X / TX-43P15H / TX-43P15HQ / TX-43P15HZ / TX-51P15X / TX-51P15H / TX-51P15HQ / TX-51P15HZ (serv.man2) service manuals if exist.