Panasonic TH-50PB2E / TH-65PB2E Service Manual / Other ▷ View online
Connect to the USB port of the PC
or Charge port of the display.
or Charge port of the display.
Charge port of the display
Included
Charger
Charger
A Lithium-ion polymer rechargeable battery is built in to the electronic pen.
So you can not change the battery.
Charge the battery with included charger or connecting by USB.
So you can not change the battery.
Charge the battery with included charger or connecting by USB.
Troubleshooting for Charger
If the pen can not be charged by charger, try to charge by USB.
If the pen can not be charged by charger, try to charge by USB.
if Charging by USB is OK, Charger is defective.
if Charging by both Charger and USB is NG, Pen is defective.
if Charging by both Charger and USB is NG, Pen is defective.
The Power Button
lights red while
charging.
lights red while
charging.
Specification
PB1
PB2
Pen tip
Bold (No Eraser)
Thin + Eraser
Number of Buttons (except Pen tip)
4
6
External dimensions
198.5 x φ18.5mm
with Optical Attachment
236xφ18.5mm
200.5 x φ17mm
With Optical Attachment
239.5xφ17mm
Color
White
Black
Number of boards
2
3
Battery
NI-MH rechargeable battery
1.2V x 750mAh
Lithium-ion polymer rechargeable
battery
3.7V x 90mAh x 2 cells
Operation time
5h
5h
Charging method
USB
Inductive or USB
Dry-cell battery use
○
×
Use while USB charging
×
○
Shorten the depth of pressure
sensor
×
○
Transmission system
Zigbee
Zigbee
LED
Pen (Power , Color)
Pen (Power), Charger (Power)
Eraser
×
○
Rear
Remote Operation
Tip side Attachment
Rear (Erase) side Attachment
Remote Attachment auto detection
×
○
(auto detection button)
Remote Eraser
×
○
2012/12/28
ID事業開発G
Specification
Registering (Pairing)
1) Select the “PAIRING”
of “TOUCH-PEN SETTING” menu
2) Select the “Pairing”
3) Press and hold the buttons (①)
and press the button (②)
4) Bring the Electronic Pen to within 2m
from the Electronic Pen Adapter.
Success
message
Only Step 3 and Step 4 needs to be performed when registering the first Electronic Pen.
To use the Electronic Pen, you need to register it to the Electronic Pen Adapter.
No more than four electronic pen can be
registered for one pen adapter.
so when exchanging the pen, register it after
unregister the all.
Turn off nearby interactive plasma display
when registering and unregistering electronic
pen.
registered for one pen adapter.
so when exchanging the pen, register it after
unregister the all.
Turn off nearby interactive plasma display
when registering and unregistering electronic
pen.
2) Select the “Unpairing All”
Unregistering (Unpairing)
1) Select the “PAIRING”
of “TOUCH-PEN SETTING” menu
must confirm some messages.
Click on the first or last page to see other TH-50PB2E / TH-65PB2E service manuals if exist.