Panasonic TH-47LF30W Service Manual ▷ View online
TH-47LF30W
25
Precautions when replacing the Stand Sleeve (Right,
Left)
Left)
• Note the mounting mistake of right and left. (Hook is
inside.)
• Note the mounting position of the base metal bracket.
7. Remove 9 screws and then remove the Cassis Base.
8. Remove the LCD Panel from the Cabinet Front and
replace the LCD Panel.
Precautions when replacing the LCD Panel
• Metal fittings are opened and put in outside and it inserts
from one side.
(Careful not to pinch hand. It is good to have a dotted line
portion.)
(Careful not to pinch hand. It is good to have a dotted line
portion.)
• Please set the panel downward.
The notes at the time of sticking Felt and Sheet of
LCD Panel
LCD Panel
• Please stretch according to the attachment position of F
or S after attaching a LVDS cable and a wire.
Please stick on the same place as before.
Please stick on the same place as before.
• A: TMKZ2AX218
[Attachment specification]
X: Fit to end of T-CON Shield.
Y: Fit top end of panel draw.
X: Fit to end of T-CON Shield.
Y: Fit top end of panel draw.
• B: TMKZ2AX223
[Attachment specification]
X: Fit top end of panel draw.
Y: Centered around draw of panel.
Hide the hole in the top.
X: Fit top end of panel draw.
Y: Centered around draw of panel.
Hide the hole in the top.
• C: TMKZ2AX223
[Attachment specification]
X: Centered around draw of panel.
Y: Centered around draw of panel.
X: Centered around draw of panel.
Y: Centered around draw of panel.
TH-47LF30W
26
• D: TMKA526
[Attachment specification]
X: Centered around of clamper leg.
Y: Centered around between of clamper leg.
X: Centered around of clamper leg.
Y: Centered around between of clamper leg.
• E: TMKA526
[Attachment specification]
X: Centered around of clamper leg.
Y: Fit to top end of Inverter Shield.
X: Centered around of clamper leg.
Y: Fit to top end of Inverter Shield.
• F: TMKA538
[Attachment specification]
X: Centered around end of panel.
Y: Fit to end of the panel concave portion.
X: Centered around end of panel.
Y: Fit to end of the panel concave portion.
• G: TMKA538
[Attachment specification]
X: Centered around end of panel.
Y: Fit lower end of panel.
X: Centered around end of panel.
Y: Fit lower end of panel.
• H: TMKZ2AX219
[Attachment specification]
X: Fit to end of the panel.
Y: Fit lower end of panel draw.
X: Fit to end of the panel.
Y: Fit lower end of panel draw.
• I: TMKZ299
[Attachment specification]
X: Centered around of panel hole.
Y: Fit lower end of panel hole.
X: Centered around of panel hole.
Y: Fit lower end of panel hole.
• J: TMKZ2AA158
[Attachment specification]
X: Fit bending of panel.
Y: Fit top end of panel.
Protrusion ban to panel front and side.
X: Fit bending of panel.
Y: Fit top end of panel.
Protrusion ban to panel front and side.
8.14. V1 Board, LED Panel and the
Mounting DEC replacement
1. Remove the Control Panel Assy.
(Refer to V2-Board replacement and procedure 1)
2. Remove the Control Print Fix Metal, Mounting Panel Top
(right, Left), Stand Sleeve (right, Left), Cassis Base and
LCD Panel.
(Refer to Removal of LCD Panel and procedure 2-8)
LCD Panel.
(Refer to Removal of LCD Panel and procedure 2-8)
3. Please let me slide Mounting DEC (
×2) and remove
Mounting DEC (
×2) .
4. Replace the Mounting DEC.
5. Remove the flexible cables from the connectors (V11)
and then remove the V1-Board.
6. Replace the LED Panel and V1-Board.
The position of Gasket and Felt stuck on Mounting
DEC
DEC
• Please stick on the same place as before.
The notes at the time of exchanging V1 Board and
Flexible cable (HX11-V11)
Flexible cable (HX11-V11)
• Please stick on the same place as before.
Precautions when replacing the Mounting DEC
• (A) part push. slide up to hook.
TH-47LF30W
27
8.15. Cabinet Front and Panasonic
Badge replacement
Precautions of replacement
• The Panasonic Badge have not enclosed. It supplies as
replacement parts. Please exchange simultaneously with
exchange of Cabinet Assy.
exchange of Cabinet Assy.
1. Remove the Contrl Panel Assy.
(Refer to Removal of V2-Board replacement and
procedure 1)
procedure 1)
2. Remove the Control Print Fix Metal, Mounting Panel Top
(right, Left), Stand Sleeve (right, Left), Cassis Base and
LCD Panel.
(Refer to Removal of LCD Panel and procedure 2-8)
LCD Panel.
(Refer to Removal of LCD Panel and procedure 2-8)
3. Remove the V1-Board, LED Panel and Mounting DEC.
(Refer to V1-Board, LED Panel and the Mounting DEC
replacement and procedure 3-4)
replacement and procedure 3-4)
4. Mounting C/F C/B (Top, Bottom, Right, Left) is made to
slide in the direction of an arrow, and it removes from
Cabinet Assy.
Cabinet Assy.
The position of Felt of Mounting C/F C/B
• Please stick on the same place as before.
Precautions when replacing the Mounting C/F C/B
• Note running aground, when sliding in the direction of an
arrow.
5. Remove the Panasonic Badge and replace the
Panasonic Badge.
6. Rereplace the Panasonic Badge.
TH-47LF30W
28
7. Rereplace the Cabinet Front.
Notes when exchanging Panasonic Badge
• Insert the first to this hook.
Click on the first or last page to see other TH-47LF30W service manuals if exist.