DOWNLOAD Panasonic TC-51P100G / TC-51P100H Service Manual ↓ Size: 22.29 MB | Pages: 127 in PDF or view online for FREE

- 5 -

This flowchart indicates disassembly items of the cabinet parts and circuit boards in order to find the items
necessary for servicing, when reassembling, perform the procedures in the reverse order.

Top Cabinet

Screen

Rear Cover (Bottom)

Rear Cover (Top)

Speaker Grille

Speaker Ass'y

Ornament Panel

CRT Ass'y

DY, VM coil

Remove CRT Board
(LR, LG, LB) from 
CRT,Connector

Main Chassis

A/B2/D/E/F/H/P/T
W/CP/DC/DG

+

Mirror

G-Board

CRT Lens

- 6 -

1. The Ornament Panel is secured by (3) striker pins.

Grip the Ornament Panel at the side corner pull to
remove.

1. Remove (11) Screws

1. Remove (2) screws.

1. Remove (10) screws.

Ornament Panel

(11) Screws

Top Cabinet

(11) Screws

(2) Screws

Speaker Grille

(10) Screws

Note: Board ground wires may have to be disconnected to disassemble some boards. All ground wires must be

reconnected using jumper leads if necessary before power is applied to Receiver for service.

- 7 -

1. Remove (14) screws.

1. Remove (4) screws.

2. Remove (8) screws.

1. Remove (4) screws.

2. Remove (2) screws.

1. Remove (18) screws.
2. Remove (1) screws.

Screen Frame (R)

Screen Frame (L)

Top Cabinet

Screen Frame (Top)

Screen Frame (Bottom)

(14) Screws

Fresnel Lens

Location of Lavel

Lenticular Lens

Front Panel

Front side

(Left · Front)

(Left · Rear)

(Left · Front)

Rear side

Mirror (Rear View)

(4) Screws

Rear Cover (Top)

Mirror (Rear View)

(8) Screws

(4) Screws

Top Cabinet

Screw

(18) Screws

AC Cord Cover

(1) Screw

plate

Rear Cover
(Bottom)

- 8 -

1. Remove the Rear Cover (Bottom) by removing

(19) screws around its perimeter.

2. Remove lead wires and bundles from holders as

necessary.

3. Pull out main chassis and stand it.

1. Remove the each circuit board from A or E-Board.
2. Connect extension cables between individual cir-

cuit board and A or E-Board.

Note: Extension cable kit is supplied as service fix-

tures and tools. ( Part No. TZS709010 )

1. Remove the Rear Cover (Bottom) by removing

(19) screws around its perimeter.

2. Remove (1) screws secured the CP and DC

Board.

3. Pull out the CP and DC Board.

1. Remove the Rear Cover (Bottom) by removing

(19) screws around its perimeter.

2. Remove (1) screws secured the P Board.
3. Pull out the P Board.

1. Remove the Top Cabinet Ass’y.
2. Remove G-Board by removing (3) screws.

A

E

Main chasisis

CP-Board

DC-Board

P-Board

G-Board
(3) Screws