Panasonic KX-TS85GB / KX-TS85GW Service Manual ▷ View online
•|
5
•|
KX-TS85GB/KX-TS85GW
OPERATIONS
Selecting the Dialing Mode
You can select the dialing mode by programming. If you have touch
tone service, set to TONE. If rotary or pulse service is used, set to
PULSE. Your phone comes from the factory set to TONE.
tone service, set to TONE. If rotary or pulse service is used, set to
PULSE. Your phone comes from the factory set to TONE.
Making Calls
You can make a call by simply lifting the handset. To hang up, place
the handset on the cradle.
the handset on the cradle.
Using the speakerphone
Press
firmly, until the indicator lights.
Dial a phone number.
• The dialed number is displayed.
• After a few seconds, the display will show
• The dialed number is displayed.
• After a few seconds, the display will show
the length of the call.
• If you misdial, hang up and start from step 1.
When the other party answers,
talk into the MIC (microphone).
talk into the MIC (microphone).
To hang up, press
.
• The indicator light goes out.
• The display will return to the stand-by mode.
• The display will return to the stand-by mode.
1
2
2
3
4
4
To adjust the handset volume (5 levels) or the speaker
volume (9 levels) while talking
volume (9 levels) while talking
To increase, press
.
To decrease, press
.
• "
" shows the volume level.
• The display will return to the dialed
number, then the length of the call.
• After hanging up, the handset volume
number, then the length of the call.
• After hanging up, the handset volume
will return to the middle level.
To redial the last number dialed
The redial function allows you to dial the last number you have dialed.
Press
press
.
Lift the handset.
Press
.
• "
" is displayed.
Press
3
.
To select PULSE, press
0
.
OR
To select TONE, press
To select TONE, press
1
.
Press
.
• A beep sounds on the
handset.
When finished,
replace the handset.
replace the handset.
1
2
3
4
3
4
5
6
• To cancel during programming, replace the handset, then start
from step 1.
• If 4 beeps sound during programming, a wrong key was pressed.
Replace the handset, then start from step 1.
and Indicator
Microphone
,
Ex. PULSE is selected.
Ex. Speaker volume level: 4
Ex. Handset volume level: 4
During the speakerphone operation:
• For best speakerphone performance, talk alternately with the
caller in a quiet room.
• If the caller complains that your voice is hard to hear, press
• For best speakerphone performance, talk alternately with the
caller in a quiet room.
• If the caller complains that your voice is hard to hear, press
to decrease the speaker volume.
• You can switch to the handset by lifting it up. To switch back to
the speakerphone, press
.
•|
6
•|
KX-TS85GB/KX-TS85GW
Memory Station Numbers
Answering Calls
While a call is being received, the unit rings. You can answer it by
simply lifting the handset.
simply lifting the handset.
Using the speakerphone
Press
firmly, until the indicator lights.
Talk into the MIC (microphone).
To hang up, press
.
• The indicator light goes out.
1
2
3
2
3
• When the ringer volume is set to OFF, the unit will not ring.
When the optional headset is connected to the unit, be sure to
use the headset to talk with the caller. If you want to have a normal
phone conversation, disconnect the headset before making or
answering a call.
use the headset to talk with the caller. If you want to have a normal
phone conversation, disconnect the headset before making or
answering a call.
Speed Dialer
Storing Phone Numbers in Memory
You can store up to 10 phone numbers in the memory stations. The
dialing buttons (
0
to
9
) function as memory station numbers. Do
not press any memory stations before storing to prevent
misoperation.
misoperation.
Lift the handset.
Press
.
• "
" is displayed.
Press
.
• "
" is displayed.
Press a memory station
number (
0
to
9
).
Enter a phone number up to
21 digits.
• The entered number is
21 digits.
• The entered number is
displayed.
Press
.
• A beep sounds on
the handset.
When finished,
replace the handset.
• To store other
replace the handset.
• To store other
numbers, repeat
steps 1 through 7.
steps 1 through 7.
1
2
2
3
4
5
6
7
• If a pause is required for dialing,
can be stored in a phone number
counting as one digit.
• To cancel during programming, replace the handset, then start from step 1.
• If 4 beeps sound during programming, a wrong key was pressed. Replace
• If 4 beeps sound during programming, a wrong key was pressed. Replace
the handset, then start from step 1.
• You can keep the stored numbers confidential.
Dialing a Stored Number
Lift the handset or press
.
Press
.
Press the memory station
number (
0
to
9
).
• The stored number is displayed
and dialed.
1
3
2
and Indicator
Ringer Indicator
Microphone
Memory Station Numbers
Ex. 1 is pressed.
•|
7
•|
KX-TS85GB/KX-TS85GW
One-Touch Dialer
You can store up to 16 phone numbers in the one-touch auto dial
buttons (8 numbers in UPPER memory locations, 8 numbers in
LOWER memory locations).
buttons (8 numbers in UPPER memory locations, 8 numbers in
LOWER memory locations).
Storing Phone Numbers in Memory
Lift the handset.
Press
.
• "
" is displayed.
Press one of the one-touch
auto dial buttons.
• "
auto dial buttons.
• "
" is displayed.
Enter a phone number up
to 21 digits.
• The entered number is
to 21 digits.
• The entered number is
displayed.
Press
.
• A beep sounds
on the handset.
When finished,
replace the
handset.
• To store other
replace the
handset.
• To store other
numbers, repeat
steps 1 through 6.
steps 1 through 6.
1
2
3
2
3
Do not press any one-touch auto dial buttons before storing to
prevent misoperation.
prevent misoperation.
Dialing a Stored Number
With an UPPER memory location:
Lift the handset or press
.
Press the desired one-touch auto
dial button.
• The stored number is displayed and dialed.
dial button.
• The stored number is displayed and dialed.
1
2
2
1
2
3
2
3
To store in a LOWER memory location
Lift the handset.
Press
.
• "
" is displayed.
Press
to select a lower
memory location.
• "
• "
" is displayed.
Press one of the one-touch
auto dial buttons.
• "
auto dial buttons.
• "
" is displayed.
Enter a phone number up to
21 digits.
• The entered number is
21 digits.
• The entered number is
displayed.
Press
.
• A beep sounds on
the handset.
When finished,
replace the handset.
• To store other
replace the handset.
• To store other
numbers, repeat
steps 1 through 7.
steps 1 through 7.
1
3
2
To store in an UPPER memory location
It is recommended that you program an emergency number in the
top left one-touch auto dial button.
top left one-touch auto dial button.
4
5
6
7
• If a pause is required for dialing,
can be stored in a phone
number counting as one digit.
• To cancel during programming, replace the handset, then start from
step 1.
• If 4 beeps sound during programming, a wrong key was pressed.
Replace the handset, then start from step 1.
• You can keep the stored numbers confidential. See page 20.
Lift the handset or press
.
Press
.
Press the desired one-touch auto
dial button.
• The stored number is displayed and dialed.
dial button.
• The stored number is displayed and dialed.
OR
With a LOWER memory location:
4
5
6
One-Touch Auto
Dial Buttons
Dial Buttons
One-Touch Auto Dial Buttons
One-Touch Auto
Dial Buttons
Dial Buttons
•|
8
•|
KX-TS85GB/KX-TS85GW
Dial Lock
You can prohibit anyone from making a any number except the
one pre-programmed in the UPPER memory location at the top left
one-touch auto dial button. Only incoming calls are accepted until
the dial lock is canceled.
one pre-programmed in the UPPER memory location at the top left
one-touch auto dial button. Only incoming calls are accepted until
the dial lock is canceled.
Before using this feature, we
recommend storing an emergency
number in the UPPER memory
location in the top left one-touch
auto dial button. Even if the dialing
buttons are locked, the number
stored in this button can be dialed.
recommend storing an emergency
number in the UPPER memory
location in the top left one-touch
auto dial button. Even if the dialing
buttons are locked, the number
stored in this button can be dialed.
NOTE: If you choose not to program an emergency number, but
plan to use dial lock, any number programmed into the
UPPER memory location in the top left one-touch auto
dial button can be accessed.
UPPER memory location in the top left one-touch auto
dial button can be accessed.
To set the dial lock
Program the emergency number you want to have acces-
sible. (See above.) Mark the button accordingly.
sible. (See above.) Mark the button accordingly.
1
2
3
4
5
6
2
3
4
5
6
Lift the handset.
Press
.
Press
.
•
“
is displayed.
When finished, replace the handset.
In the stand-by mode, the display is blank.
“
” will be displayed when you lift the handset or press
.
You can use the following features while the dialing buttons are
locked.
locked.
• Dialing a number you programmed in the UPPER memory location
at the top left one-touch auto dial button (See above.)
• Turning the ringer on/off
• Selecting the ringer volume
• Selecting the ringer tone
• Adjusting the handset, speaker and headset volumes
• Muting the conversation
at the top left one-touch auto dial button (See above.)
• Turning the ringer on/off
• Selecting the ringer volume
• Selecting the ringer tone
• Adjusting the handset, speaker and headset volumes
• Muting the conversation
To cancel the dial lock
Repeat steps 2 through 6.
• “
” will disappear.
Enter the 4-digit number
entered in step 6 again.
entered in step 6 again.
7
8
9
8
9
Press
.
• A beep sounds on the handset.
When finished, replace the handset.
Press
5
,
3
and then
9
.
Lift the handset.
1
2
3
4
5
6
2
3
4
5
6
Programmable Dial Lock
You can also lock the dialing buttons using a 4-digit password. First,
program you password. The factory preset password is “1111”.
program you password. The factory preset password is “1111”.
To set the password
Please write down you password. If you forget your password,
please consult your nearest Panasonic service center.
please consult your nearest Panasonic service center.
Press
.
Press 1 .
Enter the current password.
• The factory preset is “1111”.
• The factory preset is “1111”.
Press 0 .
Enter the new password using a 4-digit number.
This one-touch auto
dial button
dial button
Click on the first or last page to see other KX-TS85GB / KX-TS85GW service manuals if exist.