Panasonic KX-TG1107UAJ / KX-TG1107UAM / KX-TGA110UAJ / KX-TGA110UAM Service Manual ▷ View online
5.2. Handset
Shown in Fig.-
To Remove
Remove
3
Cabinet Cover
Screws (2 × 8)..........(B) × 2
4
Follow the procedure.
5
Main P.C. Board
Screw (2 × 8)..............(C ) × 3
Tape and Solders
Main P.C. Board
Tape and Solders
Main P.C. Board
13
KX-TG1107UAJ / KX-TG1107U AM / KX-TGA110UAJ / KX-TGA110UAM
6 ASSEMBLY INSTRUCTIONS
6.1. Warning When Constructing the Base Unit
OK
NG
Rib
CHG terminal is properly fit in the cabinet.
CHG terminal comes out of rib by pulling black lead wire when opening the cabinet and turning
the PCB over. The terminal cannot have enough elastic force, cannot have good contact with
handset, and it will result in charge problem.
the PCB over. The terminal cannot have enough elastic force, cannot have good contact with
handset, and it will result in charge problem.
14
KX-TG1107UAJ / KX-TG1107U AM / KX-TGA110UAJ / KX-TGA110UAM
6.2. How to Replace the Handset LCD
15
KX-TG1107UAJ / KX-TG1107U AM / KX-TGA110UAJ / KX-TGA110UAM
Cross Reference:
Check Power (P.17)
Bell Reception (P.21)
Check Battery Charge (P.18)
Check Link (P.19)
Check Handset Transmission (P.21)
Check Handset Reception (P.21)
SIGNAL ROUTE (P.46)
Check Caller ID (P.21)
7 TROUBLESHOOTING GUIDE
Flow Chart
16
KX-TG1107UAJ / KX-TG1107U AM / KX-TGA110UAJ / KX-TGA110UAM
Click on the first or last page to see other KX-TG1107UAJ / KX-TG1107UAM / KX-TGA110UAJ / KX-TGA110UAM service manuals if exist.