Panasonic KX-TCD816UAS / KX-TCD816UAT / KX-TCA181UAS / KX-TCA181UAT Service Manual ▷ View online
25.3. FLAT PACKAGE IC INSTALLATION PROCEDURE
1. Temporarily fix the FLAT PACKAGE IC, soldering the two marked pins.
*Check the accuracy ofthe IC setting with the corresponding soldering
foil.
foil.
2. Apply flux to all pins of the FLAT PACKAGE IC.
3. Solder the pins, sliding the soldering iron in the direction ofthe arrow.
25.4. BRIDGE MODIFICATION PROCEDURE
1. Lightly resolder the bridged portion.
2. Remove the remaining solder along the pins using a soldering iron as shown in the figure below.
73
KX-TCD816UAS / KX-TCD816U AT / KX-TCA181UAS / KX-TCA181UAT
26 CABINET AND ELECTRICAL PARTS (BASE UNIT)
74
KX-TCD816UAS / KX-TCD816U AT / KX-TCA181UAS / KX-TCA181UAT
27 CABINET AND ELECTRICAL PARTS (HANDSET)
Note:
(*1) The rechargeable Ni-MH battery P03P (HHR-4EPT) is available through sales route ofPanasonic.
(*2) Attach the spacer (No. 131) to the exact location described above.
(*3) This cable is fixed by connector lock. Refer to
Fix the LCD to the Main P.C.Board (Handset) (P.16).
75
KX-TCD816UAS / KX-TCD816U AT / KX-TCA181UAS / KX-TCA181UAT
28 CABINET AND ELECTRICAL PARTS (CHARGER UNIT)
76
KX-TCD816UAS / KX-TCD816U AT / KX-TCA181UAS / KX-TCA181UAT
Click on the first or last page to see other KX-TCD816UAS / KX-TCD816UAT / KX-TCA181UAS / KX-TCA181UAT service manuals if exist.