Panasonic KX-TCD400RUB / KX-TCD400RUC / KX-TCD400RUF / KX-A140RUB / KX-A140RUC / KX-A140RUF Service Manual ▷ View online
8 OPERATIONS
8.1. Power On/Off
*1 When
button is released, the display changes to the standby mode.
*2 The display goes blank.
8.2. Making a Call
*1 If you need correction, press CLEAR. Digit is cleared to the left, then enter numbers.
8.3. Answering a Call
·
Each ringer will start ringing with lower volume then gradually increase the volume when receiving a call.
*1 You can also answer a call by pressing any dialling button, HOLD,
, or
.
8.4. Setting the Clock/Date
After a mains power failure the clock needs to be reset. Ensure that
icon is not flashing.
·
To exit the operation, press
any time.
*1 For example, to set 7:15, enter 0715.
*2 For example, to set the 16th of February, 2003, enter 160203.
*2 For example, to set the 16th of February, 2003, enter 160203.
21
KX-TCD400RUB / KX-TCD400RUC / KX-TCD400RUF / KX-A140RUB / KX-A140RUC / KX-A140RUF
8.5. Phonebook
You can store up to 20 caller information in the phonebook.
8.5.1. Storing a Caller Information
·
To exit the operation, press
any time.
*1 If you need correction, press RIGHT or LEFT to move cursor then clear a character by pressing CLEAR, and/or enter
characters. Characters are cleared or added to the left of the flashing character. To enter characters, see Character Selection
below.
*2 To continue storing another caller information, repeat the steps from 3.
characters. Characters are cleared or added to the left of the flashing character. To enter characters, see Character Selection
below.
*2 To continue storing another caller information, repeat the steps from 3.
22
KX-TCD400RUB / KX-TCD400RUC / KX-TCD400RUF / KX-A140RUB / KX-A140RUC / KX-A140RUF
·
To exit the operation, press
any time.
*1 If there is no item stored in the phonebook, the display shows
.
*2 Digits are cleared to the left of the flashing digit.
*3 Digits are added to the left of the flashing digit. If you need to clear or add more than one digit, repeat the steps from 5.
*4 Characters are added to the left of the flashing character. If you need to clear or add more than one character, repeat the
steps from 8.
*5 To continue clearing another caller information, repeat the steps from 2.
*3 Digits are added to the left of the flashing digit. If you need to clear or add more than one digit, repeat the steps from 5.
*4 Characters are added to the left of the flashing character. If you need to clear or add more than one character, repeat the
steps from 8.
*5 To continue clearing another caller information, repeat the steps from 2.
8.5.2. Storing the Phone Number into the Phonebook When Pre-dialling
·
To exit the operation, press
any time.
*1 If you need correction, press CLEAR. Digit is cleared to the left, then enter numbers.
23
KX-TCD400RUB / KX-TCD400RUC / KX-TCD400RUF / KX-A140RUB / KX-A140RUC / KX-A140RUF
8.5.3. Storing the Number from the Redial List into the Phonebook
·
To exit the operation, press
any time.
*1 If there is no item stored in the redial/caller list, the display shows
.
*2 If you need correction, press RIGHT or LEFT to move cursor then clear a character by pressing CLEAR, and/or enter digits.
Digits are cleared or added to the left of the flashing digit.
Digits are cleared or added to the left of the flashing digit.
8.5.4. Hot Key (: Speed Dial)
You can assign the dialling buttons 1 through 9 as hot keys. You can choose 9 phone numbers from the phonebook.
·
To exit the operation, press
any time.
*1 If there is no item stored in the phonebook, the display shows
.
*2 The number is flashing if the dialling button is already assigned as a hot key.
*3 Phonebook registration will be remained even hot key registration is cleared.
*3 Phonebook registration will be remained even hot key registration is cleared.
24
KX-TCD400RUB / KX-TCD400RUC / KX-TCD400RUF / KX-A140RUB / KX-A140RUC / KX-A140RUF
Click on the first or last page to see other KX-TCD400RUB / KX-TCD400RUC / KX-TCD400RUF / KX-A140RUB / KX-A140RUC / KX-A140RUF service manuals if exist.