Panasonic KX-TCD156RUB / KX-TCD156RUW / KX-TCA115RUB / KX-TCA115RUW Service Manual ▷ View online
24.3. FLAT PACKAGE IC INSTALLATION PROCEDURE
1. Temporarily fix the FLAT PACKAGE IC, soldering the two marked pins.
*Check the accuracy of the IC setting with the corresponding soldering
foil.
foil.
2. Apply flux to all pins of the FLAT PACKAGE IC.
3. Solder the pins, sliding the soldering iron in the direction of the arrow.
24.4. BRIDGE MODIFICATION PROCEDURE
1. Lightly resolder the bridged portion.
2. Remove the remaining solder along the pins using a soldering iron as shown in the figure below.
61
KX-TCD156RUB / KX-TCD156R UW / KX-TCA115RUB / KX-TCA115RUW
25 CABINET AND ELECTRICAL PARTS (BASE UNIT)
62
KX-TCD156RUB / KX-TCD156R UW / KX-TCA115RUB / KX-TCA115RUW
26 CABINET AND ELECTRICAL PARTS (HANDSET)
Note:
(*1) The rechargeable Ni-MH battery P03P (HHR-4EPT) is available through sales route of Panasonic.
(*2) This cable is fixed by welding. Refer to How to Replace the Handset LCD (P.15).
(*3) Attach the spacer (No. 117) to the exact location described above.
63
KX-TCD156RUB / KX-TCD156R UW / KX-TCA115RUB / KX-TCA115RUW
27 ACCESSORIES AND PACKING MATERIALS
27.1. KX-TCD156RUB/RUW
64
KX-TCD156RUB / KX-TCD156R UW / KX-TCA115RUB / KX-TCA115RUW
Click on the first or last page to see other KX-TCD156RUB / KX-TCD156RUW / KX-TCA115RUB / KX-TCA115RUW service manuals if exist.