Panasonic KX-TC1811B Service Manual ▷ View online
8.4. Signal Flowchart in the Whole System
Reception
CN101 of the base unit is connected to the TEL line, and the signal is input through the bridge diode D101. While talking the
relay (Q121) is turned ON and amplified at the amplifiers Q461, then led to DSP (IC501). DSP generates ADPCM signal. The
ADPCM signal is input to RFIC (IC101) of RF UNIT, and is mixed with pseudo random noise code (PN code) to spread the
spectrum. RFIC outputs FSK modulated RF signal. The RF signal is passed through the balun (T101) and filter (F102) to be
transmitted from the antenna. As for the handset, RF signal from the antenna is input to RFIC passing through filter (F102) and
the balun (T101) to perform the de-spread, then input to DSP (IC201). DSP performs ADPCM decoding to convert the signal
into the voice signal, then it is output to the speaker.
relay (Q121) is turned ON and amplified at the amplifiers Q461, then led to DSP (IC501). DSP generates ADPCM signal. The
ADPCM signal is input to RFIC (IC101) of RF UNIT, and is mixed with pseudo random noise code (PN code) to spread the
spectrum. RFIC outputs FSK modulated RF signal. The RF signal is passed through the balun (T101) and filter (F102) to be
transmitted from the antenna. As for the handset, RF signal from the antenna is input to RFIC passing through filter (F102) and
the balun (T101) to perform the de-spread, then input to DSP (IC201). DSP performs ADPCM decoding to convert the signal
into the voice signal, then it is output to the speaker.
Transmission
The voice signal input from the microphone is led to DSP (IC201). The DSP generates ADPCM signal. As well as the reception,
it is converted into the RF signal by RFIC (IC101). Passing through the balun (T101) and filter (F102), it is transmitted from the
antenna. As for the base unit, RF signal from the antenna is input to RFIC (IC101) passing through filter (F102) and the balum
(T101) to perform the de-spread, then input to DSP (IC201). DSP performs ADPCM decoding to convert the signal into the
voice signal. The voice signal is amplified at the TX amplifier (Q131), then output to the TEL line (CN101) through the relay
(Q121) and bridge (D101).
it is converted into the RF signal by RFIC (IC101). Passing through the balun (T101) and filter (F102), it is transmitted from the
antenna. As for the base unit, RF signal from the antenna is input to RFIC (IC101) passing through filter (F102) and the balum
(T101) to perform the de-spread, then input to DSP (IC201). DSP performs ADPCM decoding to convert the signal into the
voice signal. The voice signal is amplified at the TX amplifier (Q131), then output to the TEL line (CN101) through the relay
(Q121) and bridge (D101).
33
KX-TC1811B
8.5. EXPLANATION OF BBIC DATA
COMMUNICATION
8.5.1. Calling
8.5.2. To Terminate Communication
8.5.3. Ringing
34
KX-TC1811B
9 TERMINAL GUIDE OF IC´S, TRANSISTORS AND DIODES
9.1. Base Unit
9.2. Handset
35
KX-TC1811B
10 BLOCK DIAGRAM (Base Unit)
IC501
IC761
Q371
Q601
Q341
Q304
Q115
Q461
Q312
IC301
IC331
KX
-T
C181
1B
36
Click on the first or last page to see other KX-TC1811B service manuals if exist.