Panasonic AG-MX70E / AG-MX70MC / AG-YA70P / AG-VE70P Service Manual ▷ View online
INF-12
6.
Insert the AG-VE70P board. (Refer to the figure at right.)
7.
Insert the cable from the AG-VE70P into the connector on the motherboard. (Refer to the figure at left.)
Route the cables while carefully ensuring that they do not make contact with the transition lever unit.
Route the cables while carefully ensuring that they do not make contact with the transition lever unit.
8.
Secure the five screws which were removed in step 5.
9.
Secure the shield casing and the twenty screws which were removed in step 4.
10. Re-attach the bands removed in step 2. and close the top unit.
11. Secure the ten screws which were removed in step 1.
DISASSEMBLY PROCEDURES
CONTENTS
1.
Removal the Top Case ...................................................................................... DIS-1
2.
Removing the LCD Panel .................................................................................. DIS-1
3.
Removal the Top Case Fan Motor .................................................................... DIS-2
4.
Removal the Bottom Case Fan Motor .............................................................. DIS-2
5.
Removal the Power Unit.................................................................................... DIS-2
6.
Removal the Power Unit's Fan Motor .............................................................. DIS-2
7.
Removal the Jack Unit ...................................................................................... DIS-3
DIS - 1
1. Removal the Top Case
1. Unscrew the 9 screws (A) and the screw (B) in the
illustration.
2. Open the Top Case and disconnect P15 connector
on the Panel P.C.Board and the connector on AC
SW.
SW.
3. Unlock P5, P6, and P8, disconnect the flexible cable
and remove the Top Case.
2. Removing the LCD Panel
1. Remove the Top Case.
2. Unscrew the 6 screws (A), the 3 screws (B), and the
2. Unscrew the 6 screws (A), the 3 screws (B), and the
2 screws (C) in the illustration.
3. Disconnect connectors P1102, P1103, and P1104
and remove the Inverter Angle.
4. Unscrew the 4 screws (D) and remove the LCD
Panel.
SCREW (A)
SCREW (A)
SCREW (B)
TOP CASE
BOTTOM
CASE
PANEL P.C.BOARD
P5
P6
P8
P15
CONNECTOR
AC SW
SCREW (C)
SCREW (B)
SCREW (C)
SCREW (A)
P1102
INVERTER ANGLE
P1104
P1103
SCREW (D)
LCD PANEL
SCREW (D)
DIS - 2
3. Removal the Top Case Fan Motor
1. Remove the Top Case.
2. Remove the Inverter Angle. (See "Removal the
2. Remove the Inverter Angle. (See "Removal the
LCD Panel")
3. Unscrew the 3 screws and remove the Fan Cover.
4. Disconnect connector P1105 and remove the Top
4. Disconnect connector P1105 and remove the Top
Case Fan Motor.
4. Removal the Bottom Case Fan Motor
1. Unscrew the 4 screws and remove the Fan Cover.
2. Remove
2. Remove
the
Bottom
Case
Fan
Motor
and
disconnect the connectors.
5. Removal the Power Unit
1. Remove the Top Case.
2. Unscrew the 20 screws (A) and remove the Main
2. Unscrew the 20 screws (A) and remove the Main
Case Cover.
3. Unscrew the 4 screws (B).
4. Disconnect P1001, P1103 and P1104 and remove
4. Disconnect P1001, P1103 and P1104 and remove
the Power Unit.
6. Removal the Power Unit's Fan Motor
1. Remove the Power Unit.
2. Unscrew the 4 screws.
3. Disconnect connector P1106 and remove the
2. Unscrew the 4 screws.
3. Disconnect connector P1106 and remove the
Power Unit's Fan Motor.
FAN COVER
TOP CASE FAN MOTOR
P1105
SCREW
SCREW
BOTTOM CASE FAN MOTOR
FAN COVER
P1001
SCREW (B)
P1103
P1104
SCREW (B)
POWER UNIT
SCREW
P1106
POWER UNIT’S
FAN MOTOR
SCREW (A)
MAIN CASE COVER
Click on the first or last page to see other AG-MX70E / AG-MX70MC / AG-YA70P / AG-VE70P service manuals if exist.