Panasonic AG-DVC30P / AG-DVC30E / AG-DVC32EN / AG-DVC33MC / AG-MYA30G Service Manual ▷ View online
ELE-34
When adjustment is finished, message
“Completed!”
“Completed!”
appears and numerical
value is changed “00”.
The program goes to Camera adjustment
menu automatically.
The program goes to Camera adjustment
menu automatically.
10.
ELE-35
7. VTR ADJUSTMENT PROCEDURE
Be sure to save the VTR adjustment data into the Personal Computer, before performing adjustment.
Perform the all PC-EVR adjustments, by referring to procedures on PC screen.
7-1. Sensitivity adj of Tape sensors Adjustment (AUTO)
This adjustment is automatically executed.
1. Open the REC Inhibit Tab (SAVE side) of Tape End/Beg. Sensor Cassette (VFK1217).
2. Insert the Tape End/Beg. Sensor Cassette (VFK1217) into the camera recorder.
3. Open the “Video adjustment menu”.
4. Select “1. Sensitivity adj of Tape sensors (Auto)” in the Video adjustment menu, and then press the “Enter”
1. Open the REC Inhibit Tab (SAVE side) of Tape End/Beg. Sensor Cassette (VFK1217).
2. Insert the Tape End/Beg. Sensor Cassette (VFK1217) into the camera recorder.
3. Open the “Video adjustment menu”.
4. Select “1. Sensitivity adj of Tape sensors (Auto)” in the Video adjustment menu, and then press the “Enter”
key.
5. Set to CAMERA mode in camera recorder following the message “Auto / Manually set to CAMERA mode.”,
and then press the “Enter” key.
PRESS ENTER KEY.
Unnecessary open the door, PRESS ENTER KEY.
In case of the “Tape END / Beg. Sensor cassette
(VFK1217)” is already inserted, PRESS ENTER
KEY.
(VFK1217)” is already inserted, PRESS ENTER
KEY.
ELE-36
7-2. PG shifter Adjustment (AUTO)
This adjustment is automatically executed.
1. Connect the oscilloscope to “HID” and “SPA” on the VFK1308P.
2. Insert the DV color bar alignment tape (VFM3010EDS: NTSC or VFM3110EDS: PAL) into the camera recorder.
3. Open the “Video adjustment menu”.
4. Select “2. PG shifter adjustment (Auto)” in the Video adjustment menu, and then press the “Enter” key.
5. Set to VCR mode in camera recorder follow the message “Manually set to VCR mode.”, and then press the
1. Connect the oscilloscope to “HID” and “SPA” on the VFK1308P.
2. Insert the DV color bar alignment tape (VFM3010EDS: NTSC or VFM3110EDS: PAL) into the camera recorder.
3. Open the “Video adjustment menu”.
4. Select “2. PG shifter adjustment (Auto)” in the Video adjustment menu, and then press the “Enter” key.
5. Set to VCR mode in camera recorder follow the message “Manually set to VCR mode.”, and then press the
“Enter” key.
Please confirm this message appears on screen,
then adjustment is finished.
then adjustment is finished.
PRESS ENTER KEY.
It is unnecessary to open the door, PRESS ENTER
KEY.
KEY.
ELE-37
After finishing adjustment, please confirm that the portion “T” is within the specification as shown in figure with an
oscilloscope.
T
T = 126 ± 1 µsec
HID
SPA
In case the DV color bar alignment tape is already
inserted, PRESS ENTER KEY, then adjustment is
started.
NOTE:
When the screen change to the following screen,
camera recorder goes to STBY ON from STBY OFF
mode. Press ENTER key after the camera recorder
change to STBY ON mode completely.
inserted, PRESS ENTER KEY, then adjustment is
started.
NOTE:
When the screen change to the following screen,
camera recorder goes to STBY ON from STBY OFF
mode. Press ENTER key after the camera recorder
change to STBY ON mode completely.
Click on the first or last page to see other AG-DVC30P / AG-DVC30E / AG-DVC32EN / AG-DVC33MC / AG-MYA30G service manuals if exist.