DOWNLOAD Panasonic PT-VX505NU / PT-VX505NE / PT-VX505NEA / PT-VW435NU / PT-VW435NE / PT-VW435NEA Service Manual ↓ Size: 20.36 MB | Pages: 127 in PDF or view online for FREE

Model
PT-VX505NU PT-VX505NE PT-VX505NEA PT-VW435NU PT-VW435NE PT-VW435NEA
Pages
127
Size
20.36 MB
Type
PDF
Document
Service Manual
Brand
Device
Projector / LCD PROJECTOR
File
pt-vx505nu-pt-vx505ne-pt-vx505nea-pt-vw435nu-pt-vw.pdf
Date

Panasonic PT-VX505NU / PT-VX505NE / PT-VX505NEA / PT-VW435NU / PT-VW435NE / PT-VW435NEA Service Manual ▷ View online

-17-
Mechanical Disassembly
Mechanical disassembly should be made following procedures in numerical 
order.
Following steps show the basic procedures, therefore unnecessary step may 
be ignored.
Caution: 
The parts and screws should be placed exactly the same position as the origi-
nal otherwise it may cause loss of performance and product safety.
  
 Screws expression 
 
 (Type  
Diameter x Length
) mm
 
T type 
 
M Type
Mechanical disassembling flow chart
7-1. Duct and fans removal
5-1. Thermal fuse replacing
3-1. MAIN and  AV board removal
8. FAN(FN902) and filter house removal
7. Fan(FN907) and duct assy removal
6. Power box assy removal
5. Fan(FN908), lamp holder, speaker removal
4.  Fan(FN910), lamp assy(LP900),
 
optical unit 
removal
3.  MAIN&AV board assy removal
2. Cabinet top removal
 1. Air filter units removal
9. Cable reforming
-18-
Mechanical Disassembly
1. Air filter units removal
Fig.1
1. Pull out the filter covers (back and side). 
2. Take out the whole air filter units (back and side).
Filter cover(back)
Air filter unit(side)
Filter cover(side)
Air filter unit(back)
-19-
Mechanical Disassembly
2. Cabinet top removal
Fig.2
B
Cabinet top
1.  Loosen 1 screw-A  to remove the lamp cover.
2.  Remove 8 screws-B (M3x8) and 3 screw C-(T3x10) to remove the cabinet top.
3.  Take out the DEC DIAL.
Control buttons
Lamp cover
A
Dec inlay LED
C
C
C
R/C window
DEC DIAL
-20-
Mechanical Disassembly
Fig.3
3. MAIN&AV board assy removal
1. Remove 2 screws-A (M3x6) and 5 screws-B (T3x8) to remove the MAIN 
  board shield.
2.  Remove 1 screw-C (T3x8) to remove holder DIAL then remove R/C board.
3.  Remove 3 screws-D (T3x8) and 2 screws-E (M3x8) to remove the MAIN & 
AV board assy, then take out the USB wireless LAN.
B
R/C board
A
A
C
B
MAIN & AV board assy
MAIN board shield
Holder DIAL
USB Wireless 
LAN
B
B
B
D
D
D
E
E
Page of 127
Display

Click on the first or last page to see other PT-VX505NU / PT-VX505NE / PT-VX505NEA / PT-VW435NU / PT-VW435NE / PT-VW435NEA service manuals if exist.