Panasonic PT-TX300U / PT-TX300E / PT-TX300EA / PT-TW240U / PT-TW240E / PT-TW240EA / PT-TW330U / PT-TW330E / PT-TW330EA Service Manual ▷ View online
PT-TX300 / PT-TW240 / PT-TW330 series
5-15
9. Click Browse and select the MCU file
where you put the file in.
10.Click “Start”.
11.When NXP MCU upgrade process is
finished, “Finished” will be shown.
PT-TX300 / PT-TW240 / PT-TW330 series
5-16
MCU-M05 LAN-13G
PT-TX300-B04 <Jun 26.2013-18:32>
PT-TX300-B04 <Jun 26.2013-18:32>
Lamp Hour-Full
50
Lamp Hou-Eco
30
Operating Hour
80
Lamp On/Off Counter
11/10
Lamp Voltage/ Max
33 / 43V
UART Response
0 No problems
Over Temp
0
FanLock
0
Lamp Fail
0
CW Fail
0
Spoke Test
✔
Burn in Test
✔
Color Wheel Index
✔
ADC Calibration
✔
SNID
WM2469999
Thermal Detect
Disable
Enable
Waveform ID
0/6/7/8/9/10
Debug Message PJC
On
Off
Direct Power On
On
Off
Factory Fan RPM
4807
Factory Reset
✔
Internal Bus Log
✔
Exit
✔
12. Check MCU FW version.
- Re-plug in power cord and Power on
the projector. Get into the service mode
(Power--Left--Right--Menu) to check
the NXP MCU firmware version.
- Re-plug in power cord and Power on
the projector. Get into the service mode
(Power--Left--Right--Menu) to check
the NXP MCU firmware version.
PT-TX300 / PT-TW240 / PT-TW330 series
5-17
5-3 Network Firmware Upgrade Procedure
5-3-1 Equipment Needed
Software:
- xxx_xxx_xxx.bin (*.bin)
- xxx_xxx_xxx.bin (*.bin)
Hardware:
- Projector
- Power Cord: H420010BG001 (US Type)
H4200120G011 (EU Type)
H4281004G001 (CH Type)
- LAN Cable
- PC or Laptop
- Projector
- Power Cord: H420010BG001 (US Type)
H4200120G011 (EU Type)
H4281004G001 (CH Type)
- LAN Cable
- PC or Laptop
PT-TX300 / PT-TW240 / PT-TW330 series
5-18
5-3-2 PC Hardware Link
1. Execute Network Settings, please refer to 4-5
details of Chapter 4.
2. Enter into OSD menu.,then select
"Setting"-->LAN(Standby)->choose
"On",and select “UART Mode”->”LAN”,
then turn off the projector.
3. Double click "Internet Explorer".
4. - Visit "http://192.168.10.100/
firmwareUpdate.html" to get into
Web to upgrade lan firmware.
- Click "Update"
- Click "Update"
Click on the first or last page to see other PT-TX300U / PT-TX300E / PT-TX300EA / PT-TW240U / PT-TW240E / PT-TW240EA / PT-TW330U / PT-TW330E / PT-TW330EA service manuals if exist.