Panasonic PT-TX300U / PT-TX300E / PT-TX300EA / PT-TW240U / PT-TW240E / PT-TW240EA / PT-TW330U / PT-TW330E / PT-TW330EA Service Manual ▷ View online
PT-TX300 / PT-TW240 / PT-TW330 series
2-5
2-5 Disassemble IR Sensor
and IR Sensor Board
1. Unscrew 2 screws(as red circle) and tear
off the Tape (as yellow square) to
disassemble the IR Sensor Module.
2.Tear off the Mylar(as blue square).
3. Separate the IR Holder and IR Sensor
Board.
4.Tear off the Tape (as red square) to
disassemble the IR Sensor Board.
IR Sensor Module
IR Holder
IR Sensor Board
PT-TX300 / PT-TW240 / PT-TW330 series
2-6
5. Tear off the Sponge and Top Cover (as
red square).
Top Cover
PT-TX300 / PT-TW240 / PT-TW330 series
2-7
2-6 Disassemble Main Board
Module and Shielding
1. - Tear off the Tape (as blue square).
- Unscrew 4 screws (as red circle).
2. Unscrew 8 hex screws (as green circle)
and 1 screw (as yellow circle).
3. - Unplug 3 connectors (as red square).
- Unplug 1 connector (as yellow square)
- Unplug 1 connector (as yellow square)
of Blower (only for PT-TX300/PT-
TW330).
4. Unplug 1 connector (as green square) of
Color Wheel.
Note: Correctly SYS FAN Cable as the
above arrow.
A
B
C
D
PT-TX300 / PT-TW240 / PT-TW330 series
2-8
5. Unplug 2 connectors (as yellow square).
Please refer to the table as below for
details about each connector.
Item
Male Connector
on Main Board
The key feature
Figure
A
System Fan
Compose of Red/Blue/Black wire
(3 pin)
B
Blower
(Only for PT-TX300/PT-
TW330)
Compose of Red/White/Black
wire (3 pin)
C
Photo Sensor
Compose of Red/ Black/White
wire , Red Connector and Black
wire tube (3 pin)
D
Speaker
Compose of Black/Red wire and
Black wire tube (2 pin)
Click on the first or last page to see other PT-TX300U / PT-TX300E / PT-TX300EA / PT-TW240U / PT-TW240E / PT-TW240EA / PT-TW330U / PT-TW330E / PT-TW330EA service manuals if exist.