Panasonic PT-TW343RE Service Manual ▷ View online
-57-
Troubleshooting
Starting Abnormality
Input 100-240V, the
standby indicator
is off
standby indicator
is off
Check the main board's
16V power input
16V power input
Yes
Yes
Yes
No
No
No
No
Check 3_3V_MCU and
if ON_MCU (7th pin of
IC1801) is high level
IC1801) is high level
Power error
Check if the fuse is melt
If there is any component
damaged on the power board
Check if the fuse is melt
If there is any component
damaged on the power board
1.1. 3_3V_MCU is low, check
IC1007 is working properly 2. If
the seventh pin of IC1801 is low,
IC1801 is abnormal.
2.1. Reburn Sub CPU and Flash
program
2.2. IC1801 is abnormal
IC1007 is working properly 2. If
the seventh pin of IC1801 is low,
IC1801 is abnormal.
2.1. Reburn Sub CPU and Flash
program
2.2. IC1801 is abnormal
1.1. Check if IC1102/
IC1009 and IC1008 are
working properly
2.1. Reburn Sub CPU and
Flash program
2.2. Replace IC1004
IC1009 and IC1008 are
working properly
2.1. Reburn Sub CPU and
Flash program
2.2. Replace IC1004
1. Check if IRIS is abnormal when the projector is started.
2. Check if FAN_A, FAN_B and FAN_C are low level when the projector is
started. If yes, the projector is normal.
2. Check if FAN_A, FAN_B and FAN_C are low level when the projector is
started. If yes, the projector is normal.
1. Check if P3001 is well connected
2. Check LAMP SW (P3002) is well connected
3. IC3100's 8th and 10th pins are high level and 5th pin is low level.
3. IC3100's 8th and 10th pins are high level and 5th pin is low level.
1. Check if TEMP. A (P3006) is well connected
2. Check if IC1002 and IC1003 and their surrounding loops are normal
2. Check if IC1002 and IC1003 and their surrounding loops are normal
The projector
cannot be turned
on and the orange
indicator is on.
cannot be turned
on and the orange
indicator is on.
The green indicator
is on when the
projector is turned
on and the lamp
is off.
is on when the
projector is turned
on and the lamp
is off.
The orange
indicator is flashing
when the projector
is turned on.
indicator is flashing
when the projector
is turned on.
Yes
No
Yes
Yes
Follow the procedures below.
-58-
Troubleshooting
No picture
Follow the procedures below.
No picture with all input
sources
sources
Check signal adjustment loop and LCD driving loop;
Check power supply circuit S16V and peripheral circuit.
Check IC1001, IC8001 and peripheral circuit.
Check power supply circuit S16V and peripheral circuit.
Check IC1001, IC8001 and peripheral circuit.
No picture with PC2 input
source only
source only
Check if the HV Sync signal of IC4009's 8th/11th pin is normal;
Check if the IC1001's peripheral circuit, R1191/R1194 have H/V
Check if the IC1001's peripheral circuit, R1191/R1194 have H/V
Sync.
Check PC/AV source selecting loop and processing loop;
Check IC4009 and peripheral circuit.
Check IC4009 and peripheral circuit.
No picture with all
computer input sources
computer input sources
Yes
Yes
No
No
No
No
Check AV source selecting loop and decoding loop;
S-Video source
Check S-video sign (Y/C).
Check if IC1001's peripheral capacitor C1803 has signal.
Compound video source
Check the composite video source (video).
S-Video source
Check S-video sign (Y/C).
Check if IC1001's peripheral capacitor C1803 has signal.
Compound video source
Check the composite video source (video).
Check if IC1001's peripheral capacitor C1805 has signal.
No picture with video
input sources
input sources
Yes
Check IC1001, IC4009 and peripheral circuit.
Check if the HV Sync signal of IC4009's 6th/3rd pin is normal;
Check if the IC1001's peripheral circuit, R1051/R1193 have H/V
Check if the HV Sync signal of IC4009's 6th/3rd pin is normal;
Check if the IC1001's peripheral circuit, R1051/R1193 have H/V
Sync.
No picture with PC1 input
source only
source only
Yes
Check IC1001<Scaler> and peripheral circuit.
No picture with HDMI
input sources
input sources
Yes
Yes
No
-59-
Troubleshooting
No audio output
Follow the procedures below.
Check IC5202 and peripheral circuit.
Check if the power supply of
L5007and L5008 reaches 5.5V
Check if the power supply of
L5007and L5008 reaches 5.5V
Yes
Check related circuits of Q50011/Q5010/Q5005/Q5001.
Check the voltage of pin
4 and pin9 is more than
3V.
4 and pin9 is more than
3V.
No
1. Check if the loudspeaker cable is plugged or broken.
2. Check if the loudspeaker is damaged.
2. Check if the loudspeaker is damaged.
Check pin 43 and 46 of
IC5007 have audio signal
output.
IC5007 have audio signal
output.
No
Yes
-60-
Troubleshooting
Shutdown system
This projector provides the shutdown function to set into the standby mode immediately for product safety when
the projector has the fan operation error or lamp lightning error.
the projector has the fan operation error or lamp lightning error.
LED indication status
Shutdown detection
Probable cause
OSD warning
Not lighting or flashing
Power supply block
Fuse : Rated 6.3A
Fuse : Rated 6.3A
Blown out of fuse
(with another reason)
(with another reason)
–
Thermal switch
Over 120ºC
Blown out of thermal fuse (with another
reason)
Check usage environment
reason)
Check usage environment
–
Ballast block
Fuse
Fuse
Intake duct clogging
Ballast block error
Ballast block error
–
ON(G)/STANDBY(R) LED
blinks in Orange
WARNING LED blinks in
Red
blinks in Orange
WARNING LED blinks in
Red
Lamp cover switch
Shutdown immediately if switch
is OFF
Lamp cover is not installed securely
–
Lamp igniting error
Lamp error/burning
–
ON(G)/STANDBY(R) LED
blinks in Orange
WARNING LED is Off
blinks in Orange
WARNING LED is Off
Intake air temperature sensor
Intake air temperature error
Filter clogging
High temperature of environment
Ventilation holes are blocked
Filter clogging
High temperature of environment
Ventilation holes are blocked
–
Internal temperature sensor A
Internal temperature sensor A error
Filter clogging
High temperature of environment
Ventilation holes are blocked
Filter clogging
High temperature of environment
Ventilation holes are blocked
Internal temperature sensor B
Internal temperature sensor B error
Filter clogging
High temperature of environment
Ventilation holes are blocked
Filter clogging
High temperature of environment
Ventilation holes are blocked
–
ON(G)/STANDBY(R) LED
lights in Orange
WARNING LED is Off
lights in Orange
WARNING LED is Off
Each FAN LOCK signal
No signal
FAN A (F3001/F3002)
Connector disconnection
Fan rotation error
Fan rotation error
–
Each FAN LOCK signal
No signal
FAN B (F3003/F3004)
Connector disconnection
Fan rotation error
Fan rotation error
–
Each FAN LOCK signal
No signal
FAN C (F3005)
Connector disconnection
Fan rotation error
Fan rotation error
–
Detects Power error signal "P-FAIL".
Internal power supply line error
–
ON(G)/STANDBY(R) LED
lights in Orange
WARNING LED lights in
Red
lights in Orange
WARNING LED lights in
Red
Iris operation error
Iris unit error
Connector disconnection
Connector disconnection
–
WARNING LED lights in
Red
Red
Lamp runtime
Over 6000 hours
Lamp replacement is necessary
Indicate lamp replacing icon
WARNING LED blinks in
Red
Red
Lamp runtime
Over 6600 hours (It will auto-
matically shutoff in 10 min.)
Lamp runtime is over
Indicate lamp replacing icon
Click on the first or last page to see other PT-TW343RE service manuals if exist.