Panasonic PT-RZ970 / PT-RW930 / PT-RX110 (serv.man4) Service Manual ▷ View online
INF-9
SECTION 1 SERVICE INFORMATION
< RZ970/RW930/RX110 >
[P IN P]
[TEST PATTERN]
f
Display the test pattern built-in to the projector.
All white, All black, Window, Window(inversion), Color bar(vertical), Color bar(horizontal), 16:9/4:3 aspect frame,
Focus
f
f
Settings of position, size, and other factors will not be reflected in test patterns.
[SIGNAL LIST]
f
Registered signal list is displayed.
Registering new signals, Renaming the registered signal, Deleting the registered signal, Protecting the registered
signal, Expanding signal lock-in range, Registering to the sub memory, Deleting the sub memory
[SECURITY]
Sub-menu item
Factory default
[SECURITY PASSWORD]
[OFF]
[SECURITY PASSWORD CHANGE]
―
[DISPLAY SETTING]
[OFF]
[TEXT CHANGE]
―
[CONTROL DEVICE SETUP]
―
[CONTROL DEVICE PASSWORD CHANGE]
―
[NETWORK]
Sub-menu item
Factory default
[DIGITAL LINK MODE]
[AUTO]
[DIGITAL LINK STATUS]
―
[NETWORK SETUP]
―
[NETWORK CONTROL]
―
[NETWORK STATUS]
―
[DIGITAL LINK MENU]
―
[Art-Net SETUP]
[OFF]
[Art-Net CHANNEL SETTING]
[2]
[Art-Net STATUS]
―
Note
f
Some items may not be adjusted or used for certain signal formats to be input to the projector.
When the items cannot be adjusted or used, the items in the menu screen are shown in black characters, and they cannot be adjusted or
set.
f
The factory default setting varies depending on the selected input terminal.
f
Locate a separate, small sub screen in the main screen to project two images simultaneously.
INF-10
SECTION 1 SERVICE INFORMATION
< RZ970/RW930/RX110 >
3. Service Mode
f
This projector has Service Mode in addition to standard on-screen menus (User Mode).
f
This mode enables some menu settings for the service operation.
3. 1. Setting to Service Mode
1. Press the [MENU] button on the control panel of the projector or on the remote controller to display the main menu on
the screen.
2. Select a sub menu "service password" of the main menu "projector setup" and press the [ENTER] button.
3. Input the password "1565" by remote controller and press the [ENTER] button.
4. Press the [MENU] button. "SERVICE MODE" (MAIN MENU) will be displayed.
3. 2. Resetting to User Mode
1. Press the [MENU] button on the control panel of the projector or on the remote controller to display the main menu.
2. Select a sub menu "service password" of the main menu "projector setup" and press the [ENTER] button.
3. Input the password "0000" by remote controller and press the [ENTER] button.
4. Press the [MENU] button. "USER MODE" (MAIN MENU) will be displayed.
[ Note ] "Service mode" will be canceled even when the power is turned off.
3. 3. Functions of Service Mode
[ Note ] Function varies according to a version of the main microprocessor firmware.
3. 3. 1. EXTRA OPTION
f"EXTRA OPTION" is added to the bottom of the main menu.
':64#126120
&;0#/+%)#//#/1&'
&%/5
10
10
10
5'.(%*'%-
#761+0&':%#.+$4#6+10
29+0&':
29+0&':
#761+0&':%#.+$4#6+10
29+0&':
29+0&':
219'41((/'55#)'
'441415&
/1&'.
.+)*65'.'%6
'441415&
/1&'.
.+)*65'.'%6
/76'6+/'1((5'6
/'075'.'%6
57$/'07
'06'4
5*766'4-''2
1((
#..
&+5#$.'
%9+0&':
1.
2.
2.
4.
8.
6.
9.
5.
3.
7.
11.
12.
12.
10.
':64#126120
'&+&*<5'66+0)
10
+0&+%#6145'66+0)
/'075'.'%6
57$/'07
'06'4
13.
14.
14.
INF-11
SECTION 1 SERVICE INFORMATION
< RZ970/RW930/RX110 >
1. DYNAMIC GAMMA MODE
• Setting of the DYNAMIC GAMMA operation.
- ON : Enable the Dynamic gamma function. (Default setting)
- OFF : Disable the Dynamic gamma function.
2. DCMS
• Setting of the 3D Color Management System operation.
- ON : Enable the 3D Color Management system function. (Default setting)
- OFF : Disable the 3D Color Management system function.
3. SELF CHECK
• Self-diagnosing information Displays.
[Note]
• Items (11) - (21) indicates the status of "NG" or "OK". If the "NG" indicates in red, the projector has an abnormality now.
If the "OK" indicates in red, the projector had an abnormality in the past and operates normally now.
• [DEVICE CHECK] item at the bottom right of the screen, (11) - (21) all items status indicate of "OK" or "NG".
If the "NG" indicates in red, even one on either item has an abnormality now.
If the "OK" indicates in red, even one on either item had an abnormality in the past and operates normally now.
• To clear the error status, press the [MENU] key in the SELF CHECK mode, the confirmation window will appear and
select [OK] to clear.
This must be done after finishing the repair or maintenance.
(23)
(24)
(25)
(26)
(24)
(25)
(26)
(22)
(11)
(12)
(13)
(12)
(13)
(17)
(18)
(19)
(18)
(19)
(15)
(14)
(16)
(20)
(21)
(21)
(2)
(1)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
INF-12
SECTION 1 SERVICE INFORMATION
< RZ970/RW930/RX110 >
(1) --- Projector type (Model No.)
(2) --- Projector serial number
(3) --- Main microprocessor firmware version
(4) --- Sub microprocessor firmware version
(5) --- DIGITAL LINK firmware version
(6) --- Formatter firmware version
(7) --- FPGA firmware version (FPGA1/FPGA2)
(8) --- LD driver firmware version
(9) --- LD sub microprocessor firmware version
(10) --- Status of EMULATE setting
(11) --- Intake air temperature (Celsius/Fahrenheit)
(12) --- DMD temperature (Celsius/Fahrenheit)
(13) --- Exhaust air temperature (Celsius/Fahrenheit)
(14) --- LD1 temperature (Celsius)
(15) --- LD2 temperature (Celsius)
(16) --- LD1 check (1: normal / 0:stop)
(17) --- LD2 check (1: normal / 0:stop)
(18) --- Fans control check (1: normal / 0: abnormal)
(19) --- Luminance sensor check (Detected value:Red/Green/Blue/Yellow)
(20) --- Atmospheric pressure sensor check (hPa/Celsius)
(21) --- Angle sensor check (Horizontal angle/Vertical angle)
[Note] The following information is available for Asian model only.
(22) --- Communication status of the WL-P.C.Board
- YES : Communication good
- NO : Communication error (faulty or disconnected)
(23) --- Firmware version of IC on the WL-P.C.Board
(24) --- Usage environment information
- Applicable country Information/Nonapplicable country Information
(25) --- Functional restriction setting status
- YES : Function restriction has been canceled
- NO : Function restriction has been enabled
(26) --- Function restriction countdown
- Count of communication error/Count of environmental error
- Count is decreased when an error is detected, and become restricted with counter " 0 ". (Maximum 30)
LD2 LD3 LD4
LD1
LD2 LD3 LD4
LD1
RADIA
TOR3
PW1
PW2
POWER
LD DRIVER
EXHAUST3
DMD
EXHAUST1
EXHAUST2
RADIA
TOR2
RADIA
TOR1
PUMP1
PUMP2
4. AUTO INDEX CALIBRATION
• When replaced the phosphor wheel or color wheel, perform automatic adjustment of each wheel rotational phase.
* Please refer to SECTION 3 (Adjustments) for the procedure.
5. PW1 INDEX
6. PW2 INDEX
6. PW2 INDEX
•
Make the rotation phase adjustment of the wheels individually.
7. CW INDEX
(Do not change the setting, usually.)
Click on the first or last page to see other PT-RZ970 / PT-RW930 / PT-RX110 (serv.man4) service manuals if exist.