Panasonic PT-RZ670 / PT-RW630 (serv.man16) Service Manual ▷ View online
PREFACE
< RZ670/RW630 >
2. 3. Terminal
<RGB 1 IN> terminal
1 set (BNC x 5 (RGB/YP
B
P
R
/YC
B
C
R
/YC x 1))
RGB signal
0.7 V [p-p] 75 Ω (SYNC ON GREEN: 1.0 V [p-p] 75 Ω)
SYNC/HD
TTL high impedance, automatic positive/negative
polarity compatible
polarity compatible
VD
TTL high impedance, automatic positive/negative
polarity compatible
polarity compatible
YP
B
P
R
signal
Y: 1.0 V [p-p] including synchronization signal, P
B
P
R
: 0.7 V [p-p] 75 Ω
Y/C signal
Y: 1.0 V [p-p], C: 0.286 V [p-p] 75 Ω
VIDEO signal
BNC: 1.0 V [p-p], 75 Ω
<RGB 2 IN> terminal
1 set, high-density D-Sub 15 p (female)
RGB signal
0.7 V [p-p] 75 Ω (SYNC ON GREEN: 1.0 V [p-p] 75 Ω)
SYNC/HD
TTL high impedance, automatic positive/negative
polarity compatible
polarity compatible
VD
TTL high impedance, automatic positive/negative
polarity compatible
polarity compatible
YP
B
P
R
signal
Y: 1.0 V [p-p] including synchronization signal, P
B
P
R
: 0.7 V [p-p] 75 Ω
<DVI-D IN> terminal
1 set, DVI-D 24 p, single link, DVI 1.0 compliant, HDCP compatible
<HDMI IN> terminal
1 set, HDMI 19 p, HDCP compatible, Deep Color compatible
<SDI IN> terminal
(Only for PT-RZ670)
(Only for PT-RZ670)
1 set (BNC)
SD-SDI signal
SMPTE ST 259 compliant
HD-SDI signal
SMPTE ST 292 compliant
3G-SDI signal
SMPTE ST 424 compliant
<SERIAL IN>/<SERIAL OUT>
terminal
terminal
D-Sub 9 p, 1 set each, RS-232C compliant, for computer control
<REMOTE 1 IN>/<REMOTE 1
OUT> terminal
OUT> terminal
M3 stereo mini jack, 1 set each, for remote control (wired)/for projector connection control
<REMOTE 2 IN> terminal
1 set, D-Sub 9 p, for contact control
<DIGITAL LINK/LAN> terminal
1 set, RJ-45, for network and DIGITAL LINK connections, PJLink compatible, 100Base-TX, Art-Net
compatible
compatible
Note
f The model numbers of accessories and optional accessories are subject to change without prior notice.
9
1. The name of each part ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
INF-2
1. 1. Projector body
1. 2. Control panel
1. 3. Connecting terminals
1. 4. Remote control
2. OSD Menu Navigation ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
INF-5
3. Service Mode ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
INF-9
3. 1. Setting to Service Mode
3. 2. Resetting to User Mode
3. 3. Functions in Service Mode
4. External control ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
INF-14
4. 1. Control through Serial terminal
4. 2. Control through LAN terminal
4. 3. Control commands List
5. Notification for service operation ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
INF-20
5. 1. Before service operation
5. 2 Service
6 Troubleshooting ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
INF-22
6. 1. Shutdown system
6. 2. System log data acquisition method
6. 3. Troubleshooting
CONTENTS
SECTION 1
SERVICE INFORMATION
Model No.
PT-RZ670
PT-RW630
PT-RW630
SECTION 1 SERVICE INFORMATION
< RZ670/RW630 >
1. The name of each part
1. 1. Projector body
1
2
3
4
5
6
7
7
10
8
8
11
9
16
17
14
13
15
7
7
7
Front
Side
Rear
8
8
8
12
Projection direction
Bottom
1 Remote control signal receiver (front)
2 Power indicator <ON (G)/STANDBY (R)>
Displays the status of the power.
3 Light source indicator <LIGHT1>
Displays the status of light source 1.
4 Light source indicator <LIGHT2>
Displays the status of light source 2.
5 Temperature indicator <TEMP>
Displays the internal temperature status.
6 (Not available with this projector)
7 Adjustable
feet
Adjusts the projection angle.
8 Air intake port
9 Projection
lens
(Only models with lens)
10 Remote control signal receiver (rear)
11 Air exhaust port
12 Burglar hook port
Attaches a burglar prevention cable, etc.
13 Control
panel
14 Connecting
terminals
15 Security
slot
This security slot is compatible with the Kensington security
cables.
cables.
16 <MAIN POWER> switch
Turns on/off the main power.
17 <AC IN> terminal
Connect the supplied power cord.
Attention
f Do not block the ventilation ports (intake and exhaust) of the projector.
INF - 2
SECTION 1 SERVICE INFORMATION
< RZ670/RW630 >
1. 2. Control panel
1. 3. Connecting terminals
9
10
11
12
13
14
2
4
3
1
5
6
7
8
1 Power on <
b> button
Starts projection when the <MAIN POWER> switch on the
projector is set to <ON> when the power is switched off
(standby mode).
projector is set to <ON> when the power is switched off
(standby mode).
2 Power standby <
v> button
Sets the projector to the state where the projector is switched
off (standby mode) when the <MAIN POWER> switch on the
projector is set to <ON> and in projection mode.
off (standby mode) when the <MAIN POWER> switch on the
projector is set to <ON> and in projection mode.
3 <RGB1>
button
Switches the input to RGB1.
4 <RGB2>
button
Switches the input to RGB2.
5 <DVI-D>
button
Switches the input to DVI-D.
6 <HDMI>
button
Switches the input to HDMI.
7 <DIGITAL LINK> button
Switches the input to DIGITAL LINK.
8 <SDI>
button
Switches the input to SDI.
(Only for PT-RZ670)
(Only for PT-RZ670)
9 <MENU>
button
Displays or hides the main menu.
Returns to the previous menu when a sub-menu is displayed.
If you press the <MENU> button on the control panel for at least
three seconds while the on-screen display is off (hidden), the
on-screen display is turned on.
If you press the <MENU> button on the control panel for at least
three seconds while the on-screen display is off (hidden), the
on-screen display is turned on.
10 <LENS>
button
Adjusts the focus, zoom, and shift (position) of the lens.
11 <ENTER>
button
Determines and executes an item in the menu screen.
12 <SHUTTER>
button
Used to temporarily turn off the image.
13
asqw buttons
Used to select items in the menu screen, change settings, and
adjust levels.
Also used to enter a password in [SECURITY] or enter
characters.
Used to select items in the menu screen, change settings, and
adjust levels.
Also used to enter a password in [SECURITY] or enter
characters.
14 <AUTO SETUP> button
Automatically adjusts the image display position while projecting
the image. [PROGRESS] is displayed while in automatic
adjustment.
the image. [PROGRESS] is displayed while in automatic
adjustment.
1
2
3
4
5
6
7
8
9
10
1 <REMOTE 1 IN> terminal/<REMOTE 1 OUT> terminal
These are the terminals to connect the remote control for serial
control in a multiple projector environment.
control in a multiple projector environment.
2 <REMOTE 2 IN> terminal
This is a terminal to remotely control the projector using the
external control circuit.
external control circuit.
3 <SERIAL IN> terminal
This is the RS-232C compatible terminal to externally control
the projector by connecting a computer.
the projector by connecting a computer.
4 <SERIAL OUT> terminal
This is a terminal to output the signal connected to the <SERIAL
IN> terminal.
IN> terminal.
5 <SDI IN> terminal
This is the terminal to input SDI signals.
(Only for PT-RZ670)
(Only for PT-RZ670)
6 <RGB 1 IN> (<R/P
R
/VIDEO>, <G/Y>, <B/P
B
/C>, <SYNC/HD>,
<VD>) terminals
These are terminals to input RGB signals, YC
These are terminals to input RGB signals, YC
B
C
R
/YP
B
P
R
signals, Y/C signals, or video signals.
7 <RGB 2 IN> terminal
This is a terminal to input RGB signals or YC
B
C
R
/YP
B
P
R
signals.
8 <DVI-D IN> terminal
This is the terminal to input DVI-D signals.
9 <HDMI IN> terminal
This is the terminal to input HDMI signals.
10 <DIGITAL LINK/LAN> terminal
This is the LAN terminal to connect to the network. This is also
used when connecting a video signal transmission device via
the LAN terminal.
used when connecting a video signal transmission device via
the LAN terminal.
Attention
f When a LAN cable is directly connected to the projector, the network connection must be made indoors.
INF - 3
Click on the first or last page to see other PT-RZ670 / PT-RW630 (serv.man16) service manuals if exist.