Panasonic PT-RZ670 / PT-RW630 (serv.man14) Service Manual / Other ▷ View online
SECTION 1 SERVICE INFORMATION
< RZ670/RW630 >
3. SELF CHECK
・ Self-diagnosing information Displays.
SELF CHECK
(1)-
MAIN : 1.00
(1) Main microprocessor software version
(2)-
SUB : 1.00
(2) Sub microprocessor software version
(3)-
DIGITAL LINK : 1.30.20.5
(3) DIGITAL LINK microprocessor software version
(4)-
DDP : 00.0400.00
(4) Formatter microprocessor software version
(5)-
LD : 1.00 / 1.00
(5) LD driver main software version (LD1/LD2)
(6)-
LD SUB : 1.00
(6) LD driver sub software version
(7)-
EMULATE : DEFAULT
(7) Emulate setting state
(8)-
OK AIR TEMP 123/456 OK DMD TEMP 123/456
(8) Intake air temperature (Celsius/Fahrenheit)
(9)-
OK OUT TEMP 123/456 OK LD 123/456
DMD temperature (Celsius/Fahrenheit)
(10)-
OK FAN 1111 1111 1111 1
(9) Exhaust air temperature (Celsius/Fahrenheit)
(11)-
OK LD1 1111 LD2 1111
LD temperature (Celsius/Fahrenheit)
(12)-
OK PHOTO 123456/123456/123456/123456
(13)-
OK ANGLE SENSOR H -12.34/V +12.34
(14)-
OK ATM SENSOR 1234/567
(10) Fan condition (1: normal / 0:stop)
OK FAN
(11) LD units condition (1: normal / 0:stop)
OK LD1
LD2
(12) Color sensor condition (Red / Green / Blue / Yellow)
(13) Angle sensor condition (Horizontal angle / Vertical angle)
(14) Atmosphere sensor condition (hPa / Celsius)
4. AUTO INDEX CALIBRATION
・ When replaced the phosphor wheel and trimming wheel, perform automatic adjustment of each wheel rotational phase.
* Please refer to SECTION 3 (Adjustments) for the procedure.
5. PW1 INDEX
6. PW2 INDEX
7. CW INDEX
8. POWER OFF MESSAGE
・ Operation setting of shutter at turning off the projector
- SHUTTER KEEP: When pushing the standby key while the shutter mode is on, the projector keeps the shutter
mode on and sets into standby mode.
- SHUTTER OPEN: When pushing the standby key while the shutter mode is on, the projector opens the shutter
and displays the "Power OFF confirmation message". (Default setting)
9. ERROR OSD
・ The screen display setting of the light source error. (for rear projection)
- ON: "LD1/LD2 error message" is displayed on OSD.
- OFF: Does not display the "LD1/LD2 error message" in OSD. (Default setting)
10. MODEL
・ Set this when the A-P.C.Board is replaced.
* If you can copy EEPROM data from the old A-P.C.Board, this setting is unnecessary.
* This model setting is changed after turn power restart.
L
D
1-1
L
D
1-2
L
D
1-3
L
D
1-4
L
D
2-1
L
D
2-2
L
D
2-3
L
D
2-4
Make the rotation phase adjustment of the wheels individually.
(Please do not change the setting, usually.)
(Please do not change the setting, usually.)
・
1 1 1 1 1 1 1 1 1 1 1 1 1
RADIATOR3
PW1
PW2
POWER
LD DRIVER
EXHAUST3
DMD
EXHAUST1
EXHAUST2
RADIATOR2
RADIATOR1
PUMP1
PUMP2
1 1 1 1
1 1 1 1
* When [OK] item is abnormal last time and shuts it down, font of [OK] becomes red.
INF - 10
SECTION 1 SERVICE INFORMATION
< RZ670/RW630 >
11. LIGHT SELECT
・ Select the LD to be turned on from the two blocks LD according to the use conditions or purposes.
Switch by pressing the Enter button after selected.
- ALL: Two LD blocks will light. (Default setting)
- LD1: LD1 block will light.
- LD2: LD2 block will light.
* To return ALL When turn off the power.
3. 3. 2. Additional function of each menu
1. [PICTURE] menu
・ Press the ENTER button at "PICTURE MODE", the [Ye MODULATE] items is added.
- Enable (ON) or disable (OFF) the yellow correction function.
This projector does not provide this function.
・ When selected [USER] of sub menu [DYNAMIC CONTRAST], [AI WINDOW] will be added in the adjusting desired
correction amount items.
- Setting the [AUTO] or [MANUAL] of APL detection area. ([MANUAL] is possible a detailed setting.)
2. [POSITION] menu
・ [DVI EQUALIZER] is added to a sub menu.
- When noise contamination to DVI input caused by long cable or external device, set this item so that the
noise decreases. (AUTO/LOW/MID/HIGH)
Please set to [AUTO] usually.
3. [PROJECTOR SETUP] menu
・ 「DETAILED INFORMATION」is added to [BRIGHTNESS CONTROL STATUS] of sub menu [BRIGHTNESS CONTROL].
- Detailed information of BRIGHTNESS CONTROL can be confirmed.
・ [EMULATE] is added to sub menu [RS232C], and following other company model items are added.
- MODE_HI
- MODE_NE
- MODE_EP
- MODE_SA
- MODE_SH
- MODE_MI
- MODE_SO
- MODE_CH
- OTHER
・ The following items or page are added to the sub menu [STATUS].
1) Page 2 (Add Items)
- VERTICAL TILT
Vertical angle
- HORIZONTAL TILT
Horizontal angle
2) Page 3 (Add Items)
- DIGITAL LINK VERSION
DIGITAL LINK microprocessor software version
- FPGA VERSION
FPGA software version (FPGA1/FPGA2)
- DDP VERSION
Formatter microprocessor software version
- LD DRIVER VERSION
LD driver main software version (LD1/LD2)
- LD SUB VERSION
LD driver sub software version
- EMULATE
Emulate setting state
- VERSION
Emulate version
3) Page 5 (Add Page)
- MAIN VER.
Main microprocessor software version
- FPGA VER.
FPGA software version (FPGA1/FPGA2)
- BMP VER.
Bitmap data version
- ENG VER. ～CC VER.
Version of the each font data
(English/Russian/Korean/Chinese/Japanese/Closed caption)
4) Page 6 (Add Page)
- TEMP(℃)
Intake air temperature (IN) / Optical module temperature (OPT) /
Exhaust air temperature (OUT) / LD1 temperature (LD1) /
LD2 temperature (LD2)
- FAN MODE
FAN control mode (TYPE A～TYPE J)
- atm
Atmosphere sensor [hPa]
INF - 11
SECTION 1 SERVICE INFORMATION
< RZ670/RW630 >
- RADIATOR1
RADIATOR1 fan condition [Rotational speed]
- RADIATOR2
RADIATOR2 fan condition [Rotational speed]
- RADIATOR3
RADIATOR3 fan condition [Rotational speed]
- DMD
DMD fan condition [Rotational speed]
- PHOSPHOR1
Phosphor wheel1 fan condition [Rotational speed]
- PHOSPHOR2
Phosphor wheel2 fan condition [Rotational speed]
- P_INTAKE
Power fan condition [Rotational speed]
- DRIVER
LD driver fan condition [Rotational speed]
- EXHAUST1
Exhaust1 fan condition [Rotational speed]
- EXHAUST2
Exhaust2 fan condition [Rotational speed]
- EXHAUST3
Exhaust3 fan condition [Rotational speed]
- PUMP1
Liquid cooling pump1 condition [Rotational speed]
- PUMP2
Liquid cooling pump2 condition [Rotational speed]
5) Page 7 (Add Page)
Value of color sensor (Factory use only)
- R.SEG
Red segment value
Y / x / y
- G.SEG
Green segment value
Y / x / y
- B.SEG
Blue segment value
Y / x / y
- Y.SEG
Yellow segment value
Y / x / y
6) Page 8 (Add Page)
- ON COUNT
Number of times that each LD unit turned ON
- RUNTIME
Lighting time of each LD unit
- LD1 STATUS
State of LD1 (0: Off / 1: ON)
- LD2 STATUS
State of LD2 (0: OFF / 1: ON)
7) Page 9 (Add Page)
Information of SDI signal. (No signal is "---" displayed)
- MODE
Mode (「NO SIGNAL」,「SD-SDI」,「HD-SDI」,「3G-SDI」)
- TRANSPORT
Conversion method (「PROGRESSIVE」,「INTERLACED」)
- PICTURE
Picture information (「PROGRESSIVE」,「INTERLACED」)
- RATE
Rate information (「23.98」,「24」,「25」,「29.97」,「30」,「50」,「59.94」,「60」)
- SAMPLING
Sampling information
(「4:2:2 (YPBPR)」、「4:2:2 (YCBCR)」、「4:4:4 (YPBPR)」、「4:4:4 (YCBCR)」、
「4:4:4 (RGB)」、「4:4:4:4 (YPBPR+A)」、「4:4:4:4 (RGB+A)」、「4:4:4 (XYZ)」)
「4:4:4 (RGB)」、「4:4:4:4 (YPBPR+A)」、「4:4:4:4 (RGB+A)」、「4:4:4 (XYZ)」)
- BIT DEPTH
Bit depth (「8bit」,「10bit」,「12bit」)
8) Page 10 (Add Page)
- LD1 HISTORY
ON/OFF history log of LD1
9) Page 11 (Add Page)
- LD2 HISTORY
ON/OFF history log of LD2
INF - 12
SECTION 1 SERVICE INFORMATION
< RZ670/RW630 >
4. [TEST PATTERN] menu
・ The following test patterns are added.
- Checker pattern
- Checker inverted pattern
- Red pattern
- Magenta pattern
- Green pattern
- Yellow pattern
- Blue pattern
- Cyan pattern
- Convergence pattern
- Wheel index adjustment pattern
5. [NETWORK] menu
・ [CHANNEL A - D] information is added to [SIGNAL QUALITY] of sub menu [DIGITAL LINK STATUS].
6. [LENS SHIFT] adjustment screen
・ [VERTICAL POSITION] & [HORIZONTAL POSITION] are added.
INF - 13
Click on the first or last page to see other PT-RZ670 / PT-RW630 (serv.man14) service manuals if exist.