Panasonic PT-RZ31K / PT-RS30K Service Manual ▷ View online
INF-19
SECTION 1 SERVICE INFORMATION
<RZ31K/RS30K>
4. [PROJECTOR SETUP] menu
(1) The following two items are added to the sub-menu.
"COOLING CONDITION"
- Fan control can be set manually. (Usually set to [AUTO].)
"HIGH ALTITUDE MODE"
- Altitude can be set manually. (Usually set to [AUTO].)
(2) In the [BRIGHTNESS CONTROL STATUS] sub menu, [DETAILED INFORMATION] is displayed by pressing the [ENTER]
key. The detailed information of brightness control can be checked.
(3) [SHUTTER COUNTER] is added in sub menu [INITIALIZE].
- Initialize the count if replaced the mechanical shutter.
INF-20
SECTION 1 SERVICE INFORMATION
<RZ31K/RS30K>
(4) The following items are added to the sub menu "STATUS ".
1) Page 2
- VERTICAL TILT
Vertical angle
- HORIZONTAL TILT
Horizontal angle
- P.SENSOR
Luminance sensor detected value
2) Page 4
- LIGHT DRIVE MODE
BRIGHTNESS PRIORITY Light source used time in brightness priority mode
3) Page 7
• Displays SDI signal information (No signal is displayed with "---").
- MODE
Mode ([NO SIGNAL], [SD-SDI], [HD-SDI], [3G-SDI])
- TRANSPORT
Conversion method ([PROGRESSIVE], [INTERLACED])
- PICTURE
Picture information ([PROGRESSIVE], [INTERLACED])
- RATE
Rate information ([23.98], [24.00], [25.00], [29.97], [30.00],
[48.00], [50.00], [59.94], [60.00])
- SAMPLING
Sampling information
([4:2:2 (YPBPR)], [4:2:2 (YCBCR)], [4:4:4 (YPBPR)], [4:4:4
(YCBCR)], 4:4:4 (RGB)], [4:4:4:4 (YPBPR+A)], [4:4:4:4
(RGB+A)])
- BIT DEPTH
Bit depth ([8bit], [10bit], [12bit])
INF-21
SECTION 1 SERVICE INFORMATION
<RZ31K/RS30K>
4) Page 8
- DIGITAL LINK VERSION Digital LINK firmware version
- FPGA VERSION
FPGA firmware version (FPGA1/FPGA2/FPGA3)
- CPLD VERSION
CPLD firmware version
- FM R VERSION
Formatter (R) firmware version
- FM G VERSION
Formatter (G) firmware version
- FM B VERSION
Formatter (B) firmware version
- LD DRIVER VERSION
LD Driver firmware version (LD1-B/LD1-S/LD2-B/LD2-S)
- LD SUB VERSION
LD Sub Driver firmware version (LD1-B/LD1-S/LD2-B/LD2-S)
- FRC VERSION
FRC (Frame Rate Control) software version
- POWER VERSION
Power microprocessor software version
5) Page 9
- MAIN VERSION
Main CPU firmware version
- FPGA VERSION
FPGA firmware version [FPGA1EX/FPGA1/FPGA2/FPGA3]
* FPGA1EX is not used.
- BMP VER.
Bitmap data version
- ENG VER. ~ JPN VER.
Version of the each font data (English/Russian/Korean/Chi-
nese/Japanese/Closed caption)
6) Page 10
- TEMP (IN)
Intake air temperature(Celsius)
- TEMP (OUT)
Exhaust air temperature(Celsius)
- TEMP (OPT)
Optical module temperature(Celsius)
- TEMP (LD1B/1S)
LD1B/LD1S temperature(Celsius)
- TEMP (LD2B/2S)
LD2B/LD2S temperature(Celsius)
- TEMP (FPGA)
FPGA surrounding temperature(Celsius)
INF-22
SECTION 1 SERVICE INFORMATION
<RZ31K/RS30K>
7) Page 11 ~ 12
- AIR FLOW
Air flow sensor value/AD value, Sensor correction value/AD
value, Clogging threshold/Margin value
- FAN
Fan rotation mode [TYPE 1 ~ TYPE J]
- ALT
Altitude mode (ALT1 ~ ALT5)
- ATM
Air pressure [hPa]
- RADIATOR1
Status of Radiator 1 fan [rpm]
- RADIATOR2
Status of Radiator 2 fan [rpm]
- RADIATOR3
Status of Radiator 3 fan [rpm]
- RADIATOR4
Status of Radiator 4 fan [rpm]
- RADIATOR5
Status of Radiator 5 fan [rpm]
- RADIATOR6
Status of Radiator 6 fan [rpm]
- RADIATOR7
Status of Radiator 7 fan [rpm]
- RADIATOR8
Status of Radiator 8 fan [rpm]
- RADIATOR9
Status of Radiator 9 fan [rpm]
- RADIATOR10
Status of Radiator 10 fan [rpm]
- RADIATOR11
Status of Radiator 11 fan [rpm]
- RADIATOR12
Status of Radiator 12 fan [rpm]
- EXHAUST1
Status of Exhaust 1 fan [rpm]
- EXHAUST2
Status of Exhaust 2 fan [rpm]
- EXHAUST3
Status of Exhaust 3 fan [rpm]
- EXHAUST4
Status of Exhaust 4 fan [rpm]
- INTAKE1
Status of Intake 1 fan [rpm]
- INTAKE2
Status of Intake 2 fan [rpm]
- C-PRISM1
Status of Color Prism 1 fan [rpm]
- C-PRISM2
Status of Color Prism 2 fan [rpm]
- C-PRISM3
Status of Color Prism 3 fan [rpm]
- C-PRISM4
Status of Color Prism 4 fan [rpm]
- E-EXHAUST1
Status of Engine Exhaust 1 fan [rpm]
- E-EXHAUST2
Status of Engine Exhaust 2 fan [rpm]
- PHOSPHOR1
Status of Phosphor 1 fan [rpm]
- PHOSPHOR2
Status of Phosphor 2 fan [rpm]
- LD DRIVER1
Status of LD Driver 1 fan [rpm]
- LD DRIVER2
Status of LD Driver 2 fan [rpm]
- PUMP-R
Status of Pump R fan [rpm]
- PUMP-G
Status of Pump G fan [rpm]
- PUMP-B
Status of Pump B fan [rpm]
- PUMP1B
Status of Pump LD1-B fan [rpm]
- PUMP1S
Status of Pump LD1-S fan [rpm]
- PUMP2B
Status of Pump LD2-B fan [rpm]
- PUMP2S
Status of Pump LD2-S fan [rpm]
Click on the first or last page to see other PT-RZ31K / PT-RS30K service manuals if exist.