Panasonic PT-P1SDU / PT-P1SDE / PT-P1SDEA Service Manual ▷ View online
Exit:
Exits this application.
7.6.4.2. Receiving and transmitting of the data
Click a target button and specify a file name.
7.6.5. Adjustment Menu
7.6.5.1. Explanation of Buttons
Input Level Adjustment RGB:
Displays the RGB input level adjustment menu.
Model Info Setup
Displays the model information setup menu.
Exit:
Exits this application.
7.7. Flicker Adjustment
According to the procedure of chapter 5 "Flicker Adjustment Mode", minimize the flicker.
7.8. Input Level Adjustment
7.8.1. Adjustment Menu
7.8.2. Explanation of Buttons
OK:
Executes automatic sub contrast and sub brightness adjustments, then closes this dialog.
Cancel:
Cancels this menu.
7.8.3. Equipment to be used
PC, RGB Signal Generator, Software for Adjustment
7.8.4. Adjustment Procedure
1. Display the input level adjustment [RGB] menu.
25
PT-P1SDU / PT-P1SDE / PT-P1SDEA
2. Input a window pattern signal to PC IN connector.
Note:
·
Use approx. 15 % window pattern as follows.
Black background (screen width) : White window width = 2 : 1
Black background (screen height) : White window height = 3 : 1
·
Must use the window pattern of S-VGA (800 × 600).
3. Click the OK button.
7.9. Model Information Setup
7.9.1. Adjustment Menu
7.9.2. Explanation of Buttons
Radio buttons:
Selects the corresponding model name.
OK:
Executes model information setup, then closes this dialog.
Cancel:
Cancels this menu.
7.9.3. Equipment to be used
PC, Software for Adjustment
7.9.4. Setup Procedure
Set the projector into standby mode (POWER button on the projector control panel illuminated red), and execute the following
procedure.
procedure.
1. Display the model information setup menu.
2. Select the corresponding model name.
3. Click the OK button.
26
PT-P1SDU / PT-P1SDE / PT-P1SDEA
8 Troubleshooting
27
PT-P1SDU / PT-P1SDE / PT-P1SDEA
28
PT-P1SDU / PT-P1SDE / PT-P1SDEA
Click on the first or last page to see other PT-P1SDU / PT-P1SDE / PT-P1SDEA service manuals if exist.