Panasonic PT-JX200HBU / PT-JX200HWU / PT-JX200GBE / PT-JX200GWE / PT-JX200GBD / PT-JX200GWD (serv.man2) Service Manual ▷ View online
SECTION
1
INF-1
CONTENTS
1. The name of each part . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . INF-2
1. 1. Remote control
1. 2. Projector body
1. 3. Adapter
1. 2. Projector body
1. 3. Adapter
2. Menu Navigation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . INF-6
3. Service Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . INF-9
3. Service Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . INF-9
3. 1. Setting to Service Mode
3. 2. Resetting to User Mode
3. 3. Functions of Service Mode
3. 2. Resetting to User Mode
3. 3. Functions of Service Mode
4. Notes on service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . INF-12
4. 1. Before service operation
4. 2. Service
4. 3. Security password
4. 2. Service
4. 3. Security password
5. Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . INF-14
5. 1. Power/Light source/Temperature indicators
5. 2. Shutdown system
5. 3. System log data acquisition method
5. 4. Troubleshooting
5. 2. Shutdown system
5. 3. System log data acquisition method
5. 4. Troubleshooting
SECTION 1 SERVICE INFORMATION
INF-2
SECTION 1 SERVICE INFORMATION
< JX200 >
1. The name of each part
1. 1. Remote control
1
12
13
14
14
15
17
16
3
2
2
4
5
6
9
8
7
10
11
1 Remote control signal transmitter
2 Power <v/b> button (v standby / b power on)
2 Power <v/b> button (v standby / b power on)
Turns on/off the power of the projector.
(x pag e 46)
3 <MIRRORING> button
Switches the input to MIRRORING.
(x page 52)
4 <SIGNAGE> button
Switches the input to signage.
(x page 52)
5 <MEMORY VIEWER> button
Switches the input to Memory Viewer.
(x page 52)
6 asqw buttons/<ENTER> button/<RETURN> button
Used to operate the menu screen. Also used when entering
[SECURITY PASSWORD].
7 <AV MUTE> button
Used to turn off the image and audio temporarily.
(x pa e 57)
8 <DEFAULT> button
Resets the settings of the sub-menu to the factory defaults.
9 <MENU> button
Displays the main menu.
(x page 59)
10 <ZOOM> button/<FOCUS> button
Displays the lens menu and adjusts the projection lens.
11 <VOL+>/<VOL-> buttons
Adjusts the volume of audio output.
(x pa ge 56)
12 <LIGHTING> button
Use to turning on/off the spotlight.
(x page 56)
13 <Panasonic APP> button
Switches the input to Panasonic APPLICATION.
(x page 52
14 <HDMI> button
Switches the input to HDMI.
(x page 52)
15 <ID ALL> button
Used to simultaneously control all the projectors with a
single remote control in a multiple projector environment.
16 <ID SET> button
Sets the ID number of the remote control in a multiple projector
environment.
(x page 27)
17 Number (<1> - <6>) buttons
Used in a multiple projector environment.
Used to enter ID number or password.
Note
f
When operating the remote control by directly pointing to the remote control signal receiver at the power supply unit of the projector, operate
the remote control within a distance approximately 7 m (22'11") or shorter from the remote control signal receiver. The remote control can
control at angles of up to ±30° vertically and horizontally, but the effective control range may be reduced.
f
If there are any obstacles between the remote control and the remote control signal receiver, the remote control may not operate properly.
f
The signal from the remote control can be reflected off the projection surface to operate the projector. However, the operating range may be
limited from light reflection loss or the shape of the projection surface.
f
The remote control may not operate properly if the remote control signal receiver on the power supply unit of the projector is directly
receiving strong light, such as fluorescent light. Install the projector in a place distant from the light source.
INF-3
SECTION 1 SERVICE INFORMATION
< JX200 >
1. 2. Projector body
1 Air intake port
2 Air exhaust port
3 Remote control signal receiver (Main unit)
4 Projection lens
5 Indicators
2 Air exhaust port
3 Remote control signal receiver (Main unit)
4 Projection lens
5 Indicators
(x pages 25, 135)
6 Remote control signal receiver (Power supply unit)
7 Power <v/b> button (v standby / b power on)
7 Power <v/b> button (v standby / b power on)
Turns on/off the power of the projector.
(x page 46)
8 Track mount part B
(x page 33)
9 Lever B
10 <AC IN> terminal
This is the terminal to connect the supplied adapter.
11 Hook clasp B
This is the terminal to output audio signal when a audio signal is
input to the <HDMI IN> terminal and when the movie with audio
in the SD card is played back.
(x page 43)
18 <DC OUT> terminal cover
<DC OUT> terminal is inside.
(x page 25)
19 Ball joint fixing screw
Fixes the angle between the shaft holder and the main unit
after adjusting the orientation of the main unit.
(x page 39)
AUDIO OUT
17
22
23
23
24
25
26
26
17 <AUDIO OUT> terminal
1
9
8
4
7
6
5
11
13
15
14
14
16
2
19
1
1
3
20
2
2
2
21
18
10
12
Power supply unit
Main unit
20 Ball joint stopper
To free the ball joint movable part, remove the stopper.
21 Connecting terminals cover
(x page 25)
The connecting terminals are inside.
22 Pole
23 Shaft holder
24 Ball joint movable part
25 Shaft
26 Ball joint
23 Shaft holder
24 Ball joint movable part
25 Shaft
26 Ball joint
12 Track mount part A
(x page 33)
13 Lever A
14 Stopper for lever A
15 Lever plate A
16 Hook clasp A
14 Stopper for lever A
15 Lever plate A
16 Hook clasp A
INF-4
SECTION 1 SERVICE INFORMATION
< JX200 >
ON(G)/
STANDBY(R)
LIGHT
TEMP
SD
1
2
3
4
1 Power indicator <ON (G)/STANDBY (R)>
Indicates the status of the power.
(x page 46)
2 Light source indicator <LIGHT>
Indicates the status of the light source.
(x page 135)
3 Temperature indicator <TEMP>
Indicates the internal temperature status.
(x page 135)
4 SD card indicator <SD>
Blinks in green when accessing the SD card.
2
1
3 4
1 <DC OUT> terminal
This is the USB terminal only used for power supply. (DC 5 V,
Maximum 2 A)
2 <LAN> terminal
This is the terminal to connect to the network.
(x page 43)
3 <HDMI IN> terminal
This is the terminal to input HDMI signal.
(x page 43)
4 SD card slot
Supports SD memory card and SDHC memory card.
Attention
f
The LAN cable connecting to the projector directly should be wired indoors only.
f
Store small parts such as SD card in an appropriate manner, and keep them away from small children.
Note
f
The product number, serial number, and rating of the projector is indicated in the product plate in the position as shown in the following
illustration.
Product plate
f
Indicators
f
Connecting terminals and <DC OUT> terminal
Click on the first or last page to see other PT-JX200HBU / PT-JX200HWU / PT-JX200GBE / PT-JX200GWE / PT-JX200GBD / PT-JX200GWD (serv.man2) service manuals if exist.