DOWNLOAD Panasonic PT-DZ770U / PT-DZ770E (serv.man8) Service Manual ↓ Size: 20.39 MB | Pages: 70 in PDF or view online for FREE

1. Get the IP address and port number (default is 1024) of the projector and request the connection to the projector.

 　IP address and the port number can be get in menu of projector.

Get it in Main menu, "Network" -> "Network Status"

Get it in Main menu "Network" -> "Network Control" -> "Command Port"

2. Receive the response from projector.

Response data

Mode: 1 = Protect mode

3. 32bytes hash value is created using the data below by MD5 algorism.

″xxxxxx：yyyyy：zzzzzzzz″

・xxxxxx : Administrator user name of WEB CONTROL (Default is "admin1")
・yyyyy

: Password of admin1 above (Default is "panasonic")

・zzzzzzzz: Random value of 8 bytes got from response data

:  colon

: Separator

It is possible to control this projector by connecting PC to the LAN terminal on the side of this projector.
Connection and command transmission changes depending on Mode ( Admin Password is set or not with WEB CONTROL).
When setting the password (protect mode), please follow 4.2.2. When not setting the password (non protect mode),
please follow 4.2.3.
The control command is common with SERIAL terminal command, so please refer to "Control command chart".

9 bytes

1 byte

1 byte

1 byte

Random numbers

Terminator

Data

Space

Mode

Space

IP Address:

Port number:

8 bytes

1 byte

“NTCONTROL”

‘   ’

‘1’

‘   ’

“zzzzzzzz”

(CR)

(ASCII character)

0x20

0x31

0x20

(ASCII code hexadecimal)

0x0d

<Terminals on the side>

LAN terminal

PC for control

LAN cable

(Streight)

Note:
Lan cable and Hub are not standard accessories. Please purchase locally.
When connected directly, cross type cable is recommended.

LAN cable

(Streight)

Hub

INF - 11

Send with the command style below.

Transmitting data

Receiving data

Error response

“ERR1”

 Command format error

“ERR2”

 Out of parameter

“ERR3”

 Busy or unavailable time

“ERR4”

 Timeout or unavailable time

“ERR5”

 Data length error

“ERRA”

 Invalid password

Example. Asking command on power condition "QPW"

1. Connection to projector

IP = 192.168.0.8      port = 1024

2. Response received

Response = "NTCONTROL 1 1aa6c14e" + (CR)

1aa6c14e = 8 byte random value

3. Hash data is created from "admin1 : panasonic : 1aa6c14e" by MD5 algorism

admin1 = Administrator user name

panasonic = "admin1" password

Hash value = "01466bc27ed8c0b7e607471580c55953"

4. Data transmission

Transmitting data = "01466bc27ed8c0b7e607471580c5595300QPW" + (CR)

5. Receiving response

Receiving data = "00000" + (CR)

6. Close the communication with projector

1 byte

1 byte

Non defined length

1 byte

0x0d

Header

Terminator

‘0’

(CR)

Data

Control command

0x30

0x30

0x30

(ASCII character)

‘0’

‘0’

Control command

(CR)

Data

Terminator

0x0d

1 byte

1 byte

(ASCII　character)

Non defined length

Hash value

32 bytes

(Refer to item3 in 4.2.2.1.)

Header

‘0’

0x30

1 byte

Error massage

Terminator

4 bytes

 1 byte

 (CR)　 0x0d

 (CR)　 0x0d

 (CR)　 0x0d

 (CR)　 0x0d

 (CR)　 0x0d

 (CR)　 0x0d

INF - 12

1. Get the projector IP address and port number (default is 1024) and request the connection to the projector.

 　IP address and the port number can be get in menu of projector.

Get it in Main menu, "Network" -> "Network Status"

Get it in Main menu "Network" -> "Network Control" -> "Command Port"

2. Receive the response from projector

Responding data

Mode: 0 = Non protect mode

Send the command with the style below.

Transmission data

Receiving data

Error response

“ERR1”

 Command format error

“ERR2”

 Out of parameter

“ERR3”

 Busy or unavailable time

“ERR4”

 Timeout or unavailable time

“ERR5”

 Data length error

“ERRA”

 Invalid password

Example. Asking command on power condition "QPW"

1. Connecting to projector

IP = 192.168.0.8    port = 1024

2. Receiving response

Response = "NTCONTROL 0 " + (CR)

3. Data transmission

Transmitting data = "00QPW" + (CR)

4. Receiving response

Receiving data = "00000" + (CR)

5. Close the connection to projector

IP Address:

Port number:

Data

Space

Mode

“NTCONTROL”

‘   ’

‘0’

(ASCII character)

0x20

0x30

9 bytes

1 byte

1 byte

Terminator

(CR)

0x0d

1 byte

Header

Data

Terminator

‘0’

‘0’

Control command

(CR)

0x30

0x30

(ASCII character)

0x0d

1 byte

1 byte

Non defined length

1 byte

Header

Data

Terminator

‘0’

‘0’

Control command

(CR)

0x30

0x30

(ASCII character)

0x0d

1 byte

1 byte

Non defined length

1 byte

Error message

Terminator

 (CR)　 0x0d

 (CR)　 0x0d

4 bytes

 1 byte

 (CR)　 0x0d

 (CR)　 0x0d

 (CR)　 0x0d

 (CR)　 0x0d

INF - 13

1. Contact the dealer to purchase a replacement lamp unit.

2. A Phillips screwdriver is necessary when replacing the lamp unit.

3. Since the luminous lamp is made of glass, it may burst if dropped or hit with a hard object. Please handle with care.

4. The lamp may be burst. Replace the lamp unit carefully so that the broken pieces of the lamp glass will not scatter.

     When the projector is mounted on the ceiling, do not make the replacement directly under the lamp unit or put your

     face near it.

5. When disposing of used lamp units, contact your local authorities for correct methods.

1. Contact the dealer to purchase a replacement air filter unit.

2. A Phillips screwdriver is necessary when replacing the air filter unit.

3. Air filter replacement is recommended after cleaning the unit two times.

    The dust-proof properties may be reduced after each cleaning.

1. The lithium battery is used for the internal clock in the A-P.C. board. So when it consumed it must be replaced.

*Use only specified lithium battery

*used battery must be scrapped according to the instruction

2. After replacing the lithium battery, set the "Date and Time" on the sub-menu which in main menu "projector set up".

The basic service policy is shown below.

 ・ P-P.C.Board (* Specified components are replaced)

 ・ R2-P.C.Board

 ・ B/Q-P.C.Board

 ・ R3-P.C.Board

 ・ WL-P.C.Board

 ・ M1-P.C.Board (Intake/Exhaust)

 ・ CW-P.C.Board

 ・ M2-P.C.Board

 ・ RL-P.C.Board

 ・ L1/L2-P.C.Board

 ・ DMD Block (with Liquied cooling system)

 ・ Other electrical parts / Other mechanical parts

* DMD blocks will be integrated with the operations and services in the liquid cooling unit.

Please be sure to read the warnings and notices on the lamp that is described in the Operating Instructions.
"Read this first!", "Precautions for use", "Maintenance/replacement"

Lithium battery : CR2032

 Individual parts supply.
 Individual parts replacement on
market

  Block replacement
  P.C.Board replacement

Service method

Applied parts

Note: Do not use any other lamp than indicated above.

INF - 14