Panasonic PT-DZ16KU / PT-DZ16KE / PT-DS16KD (serv.man12) Service Manual / Other ▷ View online
SECTION 2 DISASSEMBLY PROCEDURES
<PT-DZ16K>
5. 1) Unscrew the 3 screws and release the Intake duct block.
2) Unscrew the 2 screws and remove the DMD block support plate.
XYN4+J12FJ
Intake duct block
DMD block support plate
DIS-13
6. Unscrew the 4 screws and release the DMD block.
XYN4+J12FJ
XYN3+F12FJK
XYN3+F12FJK
DMD block
DIS-13
SECTION 2 DISASSEMBLY PROCEDURES
<PT-DZ16K>
7. Remove the Intake duct block and the DMD block, from the main unit.
8. 1) Unscrew the 6 screws and remove the Intake fan block.
2) Unscrew the 3 screws and remove the Liquid cooling reservoir metal fittings.
* So that there is no load on the pipe or the tube of
a liquid cooling unit, caution should be exercised.
DIS-14
9. Unscrew the each 2 screw, remove the pump fixing bracket, and then remove the each liquid cooling pump.
XYC3+FG10FJK
XYC3+FG10FJK
Liquid cooling reservoir
metal fittings
metal fittings
Intake fan
block.
block.
pump fixing bracket
XYN3+F8FJ
XYN3+F8FJ
XYN3+F8FJ
XYN3+F8FJ
Liquid cooling
reservoir
reservoir
Liquid cooling reservoir
metal fittings
metal fittings
* Unscrew the 2 screws and remove
the liquid cooling reservoir.
DIS-14
SECTION 2 DISASSEMBLY PROCEDURES
<PT-DZ16K>
2. 7. Removal of Rod (Assy)
1. Remove the Upper Case according to the section 2.2. "Removal of Upper Case". (In advance, remove the lamp cases.)
2. 1) Unscrew the 9 screws and remove the Lamp fan block.
2) Unscrew the 2 screws and remove the Ballast bracket.
3. 1) Unscrew the 7 screws and remove the Lamp fan base.
2) Unscrew the 2 screws and remove the RL-P.C.B bracket.
XYN3+F8FJ
XYN3+F8FJ
Lamp fan block
Ballast bracket
RL-P.C.B bracket
XYN3+F8FJ
DIS-15
4. Unscrew the 4 screws and remove the Rod cover.
* Please pull straight it up not
to injure a rod integrator.
XYN3+F8FJ
Rod cover
XYN3+F8FJ
Lamp fan bas
XYN4+J12FJ
DIS-15
SECTION 2 DISASSEMBLY PROCEDURES
<PT-DZ16K>
5. Unscrew the 3 screws and remove the Rod (assy).
2. 8. Removal of Iris unit (Assy)
1. Remove the Upper Case according to the section 2.2. "Removal of Upper Case".
2. Unscrew the 2 screws and remove the Color prism 1 Fan block.
* Please be careful so that a fingerprint and dust do not stick.
XYN4+F10FJ
Rod (assy)
DIS-16
3. Unscrew the 3 screws and release the Intake duct block.
XYN3+F8FJ
Color prism 1
Fan block
Fan block
XYN4+J12FJ
Intake duct block
DIS-16
Click on the first or last page to see other PT-DZ16KU / PT-DZ16KE / PT-DS16KD (serv.man12) service manuals if exist.