Panasonic PT-DZ13KE / PT-DZ8700 Service Manual ▷ View online
Mounting instruction of RECONVER UNIT
49
For R convergence adjust
Hold DMD heat sink by rotating （Special Screw Dimple Knob M3x6） anti‐clock wise.
To avoid loosening during the adjustments, please hold heat sink tightly.
To avoid loosening during the adjustments, please hold heat sink tightly.
Adjustment Method
(1)
(2)
(3)
CLOCKWISE
ANTICLOCKWISE
(1)
(2)
ANTICLOCKWISE
CLOCKWISE
(3)
ANTICLOCKWISE
CLOCKWISE
Adjust the G image by rotating (1), (2) & (3) knobs.
*Note : If the motion reaches to the end of movable zone, image can not move further.
*Note : If the motion reaches to the end of movable zone, image can not move further.
DISPLAY
Letter indicates knob‐rotation.
Arrow indicates image motion.
Arrow indicates image motion.
50
For G convergence adjust
Adjustment Method
(1)
(2)
(3)
CLOCKWISE
ANTICLOCKWISE
(1)
(2)
ANTICLOCKWISE
CLOCKWISE
(3)
ANTICLOCKWISE
CLOCKWISE
DISPLAY
51
For R convergence adjust
Letter indicates knob‐rotation.
Arrow indicates image motion.
Arrow indicates image motion.
Adjust the R image by rotating (1), (2) & (3) knobs.
*Note : If the motion reaches to the end of movable zone, image can not move further.
*Note : If the motion reaches to the end of movable zone, image can not move further.
After Adjustment
52
Hold the DMD plate by tightening 3 screws (2.0mm hex). The bottom one
screw to be tightened when DMD block is picked up from the projector.
screw to be tightened when DMD block is picked up from the projector.
For G convergence adjust
Click on the first or last page to see other PT-DZ13KE / PT-DZ8700 service manuals if exist.