Panasonic PT-DZ12000U / PT-DZ12000E / PT-D12000U / PT-D12000E / PT-DW100U / PT-DW100E (serv.man2) Service Manual ▷ View online
(2)
Unscrew the 1 screw and remove the protection cover.
(3)
Unscrew the 2 screws and remove the R2-P.C.Board.
12.13. Removal of R3-P.C.Board
(1)
Loosen the 1 screw until it idles and open the lamp unit cover.
37
PT-DZ12000U / PT-DZ12000E / PT-D12000U / PT-D12000E / PT-DW100U / PT-DW100E
(2)
Unscrew the 1 screw and remove the protection cover.
(3)
Unscrew the 2 screws and remove the R3-P.C.Board.
12.14. Removal of S-P.C.Board
(1)
Remove the upper case according to the section 12.2. "Removal
of Upper Case".
of Upper Case".
(2)
Unscrew the 2 screws and remove the blindfold board.
(3)
Unscrew the 6 screws and remove the connection terminals
panel with S-P.C.Board and SL-P.C.Board.
panel with S-P.C.Board and SL-P.C.Board.
38
PT-DZ12000U / PT-DZ12000E / PT-D12000U / PT-D12000E / PT-DW100U / PT-DW100E
(4)
Unscrew the 4 screws and remove the S-P.C.Board.
12.15. Removal of SL-P.C.Board
(1)
Remove the upper case according to the section 12.2. "Removal
of Upper Case".
of Upper Case".
(2)
Unscrew the 2 screws and remove the SL-P.C.Board.
12.16. Removal of K-Module
(1)
Remove the signal processing block according to the steps 1
through 4 in the section 12.6. "Removal of G-P.C.Board".
through 4 in the section 12.6. "Removal of G-P.C.Board".
(2)
Unscrew the 5 screws and remove the K-Module.
39
PT-DZ12000U / PT-DZ12000E / PT-D12000U / PT-D12000E / PT-DW100U / PT-DW100E
12.17. Removal of Ballasts 1 and 2 (B/Q-Module)
(1)
Remove the upper case according to the section 12.2. "Removal
of Upper Case".
of Upper Case".
(2)
Unscrew the 2 screws and remove the blindfold board.
(3)
Unscrew the 6 screws and remove the connection terminals
panel with S-P.C.Board and SL-P.C.Board.
panel with S-P.C.Board and SL-P.C.Board.
(4)
Unscrew the 2 screws and remove the ballast reinforcement
metal fittings.
metal fittings.
(5)
Loosen each of 3 screws until they idle, remove the lamp units 1
and 2.
and 2.
(6)
Unscrew each of 1 screw and release 2 lamp unit terminals of the
ballast block L.
ballast block L.
40
PT-DZ12000U / PT-DZ12000E / PT-D12000U / PT-D12000E / PT-DW100U / PT-DW100E
Click on the first or last page to see other PT-DZ12000U / PT-DZ12000E / PT-D12000U / PT-D12000E / PT-DW100U / PT-DW100E (serv.man2) service manuals if exist.