Panasonic PT-D3500U / PT-D3500E Service Manual ▷ View online
(5)
Pull out the flexible cable connected to the J-P.C.Board. (The
reverse side of A-P.C.Board)
reverse side of A-P.C.Board)
(6)
Unscrew the 9 screws and remove the A-P.C.Board.
(7)
Unscrew the 2 screws and remove the operation button.
11.4. Removal of J-P.C.Board
(1)
Remove the A-P.C.Board block according to the steps 1 through
5 in the section 11.3. "Removal of A-P.C.Board".
5 in the section 11.3. "Removal of A-P.C.Board".
(2)
Pull out the flexible cable connected to the A-P.C.Board.
(3)
Unscrew the 10 screws and remove the J-P.C.Board.
11.5. Removal of PA-Module
(1)
Remove the A-P.C.Board block according to the steps 1 through
5 in the section 11.3. "Removal of A-P.C.Board".
5 in the section 11.3. "Removal of A-P.C.Board".
(2)
Unscrew the 1 screw and remove the grounding terminal.
(3)
Unscrew the 5 screws and remove the PA-Module.
29
PT-D3500U / PT-D3500E
11.6. Removal of PB-Module
(1)
Remove the lamp unit according to the section 11.10. "Removal
of Lamp Unit".
of Lamp Unit".
(2)
Remove the top cover according to the section 11.2. "Removal of
Top cover".
Top cover".
(3)
Unscrew the 1 screw and remove the grounding terminal.
(4)
Unscrew the 6 screws and emove the shield case.
(5)
Unscrew the 2 screws and remove the lamp duct.
30
PT-D3500U / PT-D3500E
(6)
Remove the PB-Module.
11.7. Removal of Ballast Module
(1)
Remove the PB-Module according to the section 11.6. "Removal
of PB-Module".
of PB-Module".
(2)
Unscrew the 2 screws and remove the lamp unit terminal.
(3)
Unscrew the 1 screw and remove the ballast module block.
(4)
While sliding the shield cases (1) and (2) mutually, disconnect
their hooks and separate the cases.
their hooks and separate the cases.
(5)
Remove the ballast module while pressing hooks of the 4 resin
stands (spacers) to shut.
stands (spacers) to shut.
31
PT-D3500U / PT-D3500E
11.8. Removal of R-P.C.Board
(1)
Remove the top cover according to the section 11.2. "Removal of
Top cover".
Top cover".
(2)
Unscrew the 1 screw and remove the R-P.C.Board.
11.9. Removal of Projection Lens
(1)
Fully turn the projection Lens counterclockwise.
(2)
Turn the projection lens counterclockwise in addition while
pressing the lens lock button.
pressing the lens lock button.
(3)
Remove the projection lens.
11.10. Removal of Lamp Unit
(1)
Loosen the 1 screw until it idles, then open the lamp unit cover.
32
PT-D3500U / PT-D3500E
Click on the first or last page to see other PT-D3500U / PT-D3500E service manuals if exist.