Panasonic ET-MWP100G Service Manual ▷ View online
17
10. Multi Window Processor will restart automatically when the update is completed.
Power indicator on the front panel will turn green, reboot is complete.
Power indicator on the front panel will turn green, reboot is complete.
11. Log in to the control software, please check the firmware version from [General] tab in [Settig] tab.
5. 4. Setting restore of Multi Window Processor
1. Connect the Multi Window Processor to the control computer using a RS-232C cable.
2. Turn on the power of Multi Window Processor. (Power indicator will light in green.)
3. After login in the control software, click the [CommData] tab, and type the restore command on the command line.
3. After login in the control software, click the [CommData] tab, and type the restore command on the command line.
* Restore command : [ system.RestoreBackup() ]
Then, the [Send] button is clicked.
4. Please confirm the communication log of [Comm Data] page.
When restore is completed, please reboot the power supply of a Multi Window Processor.
When restore is completed, please reboot the power supply of a Multi Window Processor.
Computer
MWP100
RS-232C cable (Streight)
Communication conditions
for the <RS232> terminal
18
6. Disassembly Procedures
6. 1. Mechanism element parts location
6. 2. Electrical parts location
Backplane board
PSU Interface board
USB board
CPU board
Power Supply unit
PSU Interface board
FAN (Intake)
FAN (Exhaust)
Top cover
Front cover
Back cover
FAN (Intake)
FAN (Exhaust)
Rack mount bracke
Rack mount bracket
USB board
Power unit
CPU board
PSU board
Backplane board
Bottom cover
19
6. 3. Disassembly procedures
* Make sure to turn off the power switch and disconnect the power plug from the wall outlet, before disassembly.
* When tore off sticky tapes, please use a new thing without reusing it on the occasion of assembling.
* When tore off sticky tapes, please use a new thing without reusing it on the occasion of assembling.
1. Top cover
・
Unscrew the 15 screws and remove the top cover.
2. Front cover
1) crew the 4 each screws and remove the right and left rack mount bracket.
2) Unscrew the 10 screws and remove the front cover.
XSS4+8FJK
XSS4+8FJK
Rack mount bracket
Rack mount bracket
XSS3+6FJK
XSS3+6FJK
Top cover
Front cover
20
3. Back cover
1) Remove the CPU board (2 screws), power supply unit (1 screw), power unit attachment section cover (1 screw).
2) Unscrew the 21 screws and remove the back cover.
3. Backplane board
1) Remove the top cover.
2) Unscrew the 8 screws and remove the Backplane board. block.
2) Unscrew the 8 screws and remove the Backplane board. block.
CPU board
Power supply unit
Cover for the POWER SUPPLY
atachment section
Back cover
Backplane board. block
XSS3+6FJK
XSS3+6FJK
Click on the first or last page to see other ET-MWP100G service manuals if exist.