Panasonic KX-MB2110RUW / KX-MB2130RUW / KX-MB2170RUW / KX-MB2117RUB / KX-MB2137RUB / KX-MB2177RUB Service Manual ▷ View online
113
KX-MB2110RUW/ KX-MB2130RUW/ KX-MB2170RUW/ KX-MB2117RUB/ KX-MB2137RUB/ KX-MB2177RUB
12.2. Remote Programming
If, after the call is connected, the customer describes the situation and it is determined that the problem can be corrected by
making parameter changes, this function makes it possible to change parameters such as the user code and service code from
another fax (using DTMF tones). Therefore, travel to the customer's location is not required. However, it is not possible to
change all the parameters remotely (Program Mode Table(P.115)). The function used to accomplish this is remote program-
ming.
making parameter changes, this function makes it possible to change parameters such as the user code and service code from
another fax (using DTMF tones). Therefore, travel to the customer's location is not required. However, it is not possible to
change all the parameters remotely (Program Mode Table(P.115)). The function used to accomplish this is remote program-
ming.
First, in order to check the current status of the service code parameter, print out the setup list (code: 991) and the service list
(code: 999) from the customer's fax machine.
Based on this, the parameters for the desired codes can be changed.
The procedure for changing and listing parameters is described on Entering the Remote Programming Mode and Changing
Service Codes
(code: 999) from the customer's fax machine.
Based on this, the parameters for the desired codes can be changed.
The procedure for changing and listing parameters is described on Entering the Remote Programming Mode and Changing
Service Codes
(P.114). Also, before exiting the remote programming mode, it is advisable to obtain a new list to confirm that the
changes were made correctly.
Hint:
Since the connected telephone is in use during the remote programming mode, it may be helpful to ask the customer to switch
to the speakerphone. This frees the customer from the need to remain right next to the fax while you are making parameter set-
tings. When finished, inform the customer. Also note that in very noisy locations where the DTMF tones are not audible, the
remote programming function will not work.
to the speakerphone. This frees the customer from the need to remain right next to the fax while you are making parameter set-
tings. When finished, inform the customer. Also note that in very noisy locations where the DTMF tones are not audible, the
remote programming function will not work.
114
KX-MB2110RUW/ KX-MB2130RUW/ KX-MB2170RUW/ KX-MB2117RUB/ KX-MB2137RUB/ KX-MB2177RUB
12.2.1.
Entering the Remote Programming Mode and Changing Service Codes
CROSS REFERENCE:
Program Mode Table
(P.115)
115
KX-MB2110RUW/ KX-MB2130RUW/ KX-MB2170RUW/ KX-MB2117RUB/ KX-MB2137RUB/ KX-MB2177RUB
12.2.2. Program Mode Table
12.2.2.1. User Function
Basic features
*1
Choices “7:216 x 330 / 8:216 x 340” change to Inch display when “INCHES” is set on feature #147 setting.
Fax features (KX-MB2130/ MB2137/ MB2170/ MB2177 ONLY)
Code
Function
Set Value
Default
Remote Setting
101
SET DATE & TIME
dd/mm/yy hh:mm
01/01/14 00:00
NG
102
YOUR LOGO
---------
None
NG
103
YOUR FAX NUMBER
---------
None
NG
110
LANGUAGE
1:ENGLISH / 2:RUSSIAN / 3:UKRAI-
NIAN
NIAN
RUSSIAN
OK
114
LOCATION
1:RUSSIA / 2:UKRAINE / 3:KAZAKH-
STAN
STAN
RUSSIA
120
DIALLING MODE
1:PULSE / 2:TONE
PULSE
OK
121
SET RECALL / FLASH TIME
90:900 / 70:700 / 60:600 / 40:400 /
30:300 / 25:250 / 20:200 / 16:160 /
11:110 / 10:100 / *:90 / #:80 (ms)
30:300 / 25:250 / 20:200 / 16:160 /
11:110 / 10:100 / *:90 / #:80 (ms)
900ms
OK
124
ADSL MODE
1:OFF / 2:ON
OFF
OK
145
LCD CONTRAST
-2, -1, 0, 1, 2
0
NG
147
SCALE
1:MILLIMETRES / 2:INCHES
MILLIMETRES
OK
148
DISPLAY INTERVAL
1:1sec / 2:2sec / 3:3sec / 4:4sec /
5:5sec
5:5sec
1sec
OK
151
ADMIN CODE
---------
DEFAULT=0000
NG
154
MODE RESTRICTION
0:OFF / 1:ON
OFF
NG
155
CHANGE PASSWORD
---------
DEFAULT=1234
NG
158
MAINTENANCE TIME
---------
12:00
NG
159
RESTORE DEFAULT
0:NO / 1:YES
NO
NG
161
RINGER PATTERN
1:A / 2:B / 3:C
A
NG
165
BEEP SOUND
1:OFF / 2:ON
ON
OK
174
JOB END NOTIFY
1:OFF / 2:ON
OFF
OK
210
FAX RING COUNT
1 to 9 rings (for ext. tam)
2
OK
216
AUTO CALLER ID LIST
1:OFF / 2:ON
OFF
OK
226
TIME ADJUSTMENT
1:MANUAL / 2:AUTO
MANUAL
OK
289
ERASE ADDR. BOOK
0:NO / 1:YES
NO
NG
380
PAPER
SIZE
#1
1:LETTER / 2:A4 / 3:LEGAL /
4:B5(ISO) / 5:B5(JIS) / 6:16K /
7:216x330 / 8:216x340
4:B5(ISO) / 5:B5(JIS) / 6:16K /
7:216x330 / 8:216x340
*1
A4
OK
381
PAPER
SIZE
#2
1:LETTER / 2:A4 / 3:LEGAL /
4:B5(ISO) / 5:B5(JIS) / 6:16K /
7:216x330 / 8:216x340 / 9:A5
4:B5(ISO) / 5:B5(JIS) / 6:16K /
7:216x330 / 8:216x340 / 9:A5
*1
A4
OK
383
MEDIA TYPE #1
1:PLAIN PAPER / 2:THIN PAPER
PLAIN PAPER
OK
384
MEDIA TYPE #2
1:PLAIN PAPER / 2:THIN PAPER /
3:THICK PAPER
3:THICK PAPER
PLAIN PAPER
OK
403
POWER SAVE
1:1min / 5:5min / 15:15min / 30:30min /
45:45min
45:45min
1min
OK
462
CONTRAST HOLD
1:DISABLED / 2:ENABLED
DISABLED
OK
463
DEFAULT MODE
1:COPY / 2:FAX
COPY
OK
464
MODE TIMER
0:OFF / 1:30S / 2:1min / 3:2min /
4:5min
4:5min
1min
OK
478
QUICK-JOB (COPY)
1:COPY JOB 1 / 2:COPY JOB 2 /
3:COPY JOB 3
3:COPY JOB 3
COPY JOB 1
NG
479
DEPT. COUNT VIEW
-
-
NG
482
TONER SAVE
1:OFF / 2:ON
OFF
OK
497
QUICK-JOB (SCAN)
1:SCAN JOB 1 / 2:SCAN JOB 2 /
3:SCAN JOB 3
3:SCAN JOB 3
SCAN JOB 1
NG
Code
Function
Set Value
Default
Remote Setting
212
TEL/FAX DELAYED RING
1~9
2
OK
401
PRINT SENDING REPORT
1:ERROR / 2:ON / 3:OFF
OFF
OK
402
JOURNAL AUTO PRINT
1:OFF / 2:ON
ON
OK
404
MANUAL ANSWER MODE
1:TEL / 2:TEL/FAX
TEL
OK
405
FAX RESOLUTION
1:STANDARD / 2:FINE / 3:SUPER
FINE / 4:PHOTO
FINE / 4:PHOTO
STANDARD
OK
407
FAX DUPLEX PRINT
0:OFF / 1:LONG EDGE / 2:SHORT
EDGE
EDGE
OFF
OK
116
KX-MB2110RUW/ KX-MB2130RUW/ KX-MB2170RUW/ KX-MB2117RUB/ KX-MB2137RUB/ KX-MB2177RUB
Copy features
PC print features
Scan features
411
OVERSEAS MODE
1:NEXT / 2:ERROR / 3:OFF
ERROR
OK
412
DELAYED TRANSMISSION
0:OFF / 1:ON
OFF
NG
413
ECM SELECTION
1:OFF / 2:ON
ON
OK
416
CONNECTING TONE
1:OFF / 2:ON
ON
OK
418
MAX FAX SPEED
1:14.4kbps / 2:33.6kbps
33.6kbps
OK
419
QUICK SCAN MODE
1:OFF / 2:ALWAYS
OFF
OK
420
CONFIRM FAX NO.
1:OFF / 2:ON
OFF
OK
421
RESTRICT FAX NO.
1:OFF / 2:ON
OFF
OK
422
RE-ENTER FAX NO.
1:OFF / 2:ON
OFF
OK
424
CONFIRM NEXT DOC
1:OFF / 2:ON
OFF
OK
432
AUTO REDUCTION
1:OFF / 2:ON
ON
OK
434
FAX ACTIVATION CODE
0:OFF / 1:ON
ON CODE=*#9
NG
435
AUTO DISCONNECT
0:OFF / 1:ON
ON CODE=*0
436
SILENT FAX RECOGNITION RING
3~9
3
OK
437
MEMORY RECEIVE ALERT
1:OFF / 2:ON
ON
OK
438
FRIENDLY RECEPTION
1:OFF / 2:ON
ON
OK
442
PCFAX SETTING
1:OFF / 2:ALWAYS / 3:CONNECTED
CONNECTED
OK
443
PCFAX RCV PC
(KX-MB2130/KX-MB2137/KX-MB2170/
KXMB2177 only)
(KX-MB2130/KX-MB2137/KX-MB2170/
KXMB2177 only)
-
-
NG
448
PREVIEW MODE
(KX-MB2130/KX-MB2137/KX-MB2170/
KXMB2177 only)
(KX-MB2130/KX-MB2137/KX-MB2170/
KXMB2177 only)
0:OFF / 1:ON
OFF
NG
450
WEB FAX PREVIEW
(KX-MB2130/KX-MB2137/KX-MB2170/
KXMB2177 only)
(KX-MB2130/KX-MB2137/KX-MB2170/
KXMB2177 only)
-
-
NG
451
RECEIVE NOTIFY
1:OFF / 2:ON
OFF
OK
452
FAX AUTO EMAIL
(KX-MB2130/KX-MB2137/KX-MB2170/
KXMB2177 only)
(KX-MB2130/KX-MB2137/KX-MB2170/
KXMB2177 only)
1:OFF / 2:ON
OFF
OK
458
ERASE FAX MEMORY
0:NO / 1:YES
NO
NG
459
SET FAX DEFAULT
0:NO / 1:YES
NO
NG
Code
Function
Set Value
Default
Remote Setting
460
COPY INPUT TRAY
1:#1 / 2:#2
#1
NG
461
COPY RESOLUTION
1:TEXT/PHOTO / 2:TEXT / 3:PHOTO TEXT/PHOTO
OK
467
PAGE LAYOUT HOLD
1:DISABLED / 2:ENABLED
DISABLED
OK
468
ZOOM HOLD
1:DISABLED / 2:ENABLED
DISABLED
OK
469
COLLATE HOLD
1:DISABLED / 2:ENABLED
DISABLED
OK
470
DUPLEX HOLD
1:DISABLED / 2:ENABLED
DISABLED
OK
473
EDGE HOLD
1:DISABLED / 2:ENABLED
DISABLED
OK
474
FRAME MARGIN
1:DISABLED / 2:ENABLED
DISABLED
OK
475
MARGIN HOLD
1:DISABLED / 2:ENABLED
DISABLED
OK
Code
Function
Set Value
Default
Remote Setting
774
DATA TIMEOUT
5~600s
60s
NG
776
MUTUAL A4/LETTER
1:OFF / 2:ON
ON
OK
Code
Function
Set Value
Default
Remote Setting
493
SCAN MODE
1:VIEWER/ 2:FILE / 3:EMAIL / 4:OCR /
5:EMAIL ADDRESS (KX-MB2110/ KX-
MB2117/KX-MB2130/KX-MB2137/KX-
MB2170/KX-MB2177) / 6:FTP
SERVER (KX-MB2110 / KX-MB2117 /
KX-MB2130/KX-MB2137/KX-MB2170/
KX-MB2177) / 7:SMBFOLDER (KX-
MB2110/KX-MB2117/KX-MB2130/KX-
MB2137/KX-MB2170/KX-MB2177)
5:EMAIL ADDRESS (KX-MB2110/ KX-
MB2117/KX-MB2130/KX-MB2137/KX-
MB2170/KX-MB2177) / 6:FTP
SERVER (KX-MB2110 / KX-MB2117 /
KX-MB2130/KX-MB2137/KX-MB2170/
KX-MB2177) / 7:SMBFOLDER (KX-
MB2110/KX-MB2117/KX-MB2130/KX-
MB2137/KX-MB2170/KX-MB2177)
VIEWER
OK
494
SCAN PARAM. HOLD
1:DISABLED / 2:ENABLED
DISABLED
OK
Code
Function
Set Value
Default
Remote Setting
Click on the first or last page to see other KX-MB2110RUW / KX-MB2130RUW / KX-MB2170RUW / KX-MB2117RUB / KX-MB2137RUB / KX-MB2177RUB service manuals if exist.