DOWNLOAD Panasonic DP-C354 / DP-C264 / DP-C323 / DP-C263 / DP-C213 / DP-C322 / DP-C262 Service Manual ↓ Size: 55.13 MB | Pages: 127 in PDF or view online for FREE

9

Once a month, unplug the machine and check the power cord for the following. If you notice any unusual
condition, contact your authorized Panasonic dealer

.

The power cord is plugged firmly into the receptacle.
The plug is not excessively heated, rusted, or bent.
The plug and receptacle are free of dust.
The cord is not cracked or frayed.

Do not touch areas where these caution labels are attached to, the surface may be very hot and may cause
severe burns.

Do not place any liquid container such as a vase, or coffee cup on the machine. Spilt water can cause fire or
shock hazard.

Do not place any metal parts such as staples or clips on the machine. If metal and flammable parts get into the
machine, they can short-circuit internal components, and cause fire or electric shocks.

If debris (metal or liquid) gets into the machine, switch Off and unplug the machine immediately.
Operating a debris-contaminated machine can cause fire or electric shock.

Do not try to alter the machine configuration or modify any parts. An unauthorized modification can cause
smoke or fire.

Never dispose of toner, toner cartridge, or a waste toner container into an open flame. Toner remaining in the
cartridge/bottle can cause an explosion, burns and/or injuries.

Keep button batteries/stamp out of the reach of children to prevent chocking or poisoning. If a button
battery/verification stamp is swallowed accidentally, get medical treatment immediately.

Do not place the machine near heaters or volatile, flammable, or combustible materials such as curtains that
may catch fire.

Do not place the machine in a hot, humid, dusty, or poorly ventilated environment. Prolonged exposure to
these adverse conditions can cause fire or electric shocks.

Place the machine on a level and sturdy surface that can withstand the weight of the machine. 
Refer to the Specifications section for the weight of the machine.
If tilted, the machine may tip-over and cause injuries.

When moving the machine, be sure to unplug the power cord from the outlet. If the machine is moved with the
power cord attached, it can cause damage to the cord which could result in fire or electric shock.

When relocating the machine, remove the toner and/or developer, and pack the machine

e with proper

packing materials for shipping.

This product contains a CR Coin Cell Lithium Battery which contains Perchlorate Material - special handling may apply.
See 

www.dtsc.ca.gov/hazardouswaste/perchlorate

10

Do not place a magnet near the safety switch of the machine. A magnet can activate the
machine accidentally, resulting in injuries.

Do not use a highly flammable spray, or solvent near the machine. It can cause fire.

When copying a thick document, do not use excessive force to press it against the scanning
glass. The glass may break and cause injuries.

Never touch a labelled area found on, or near the heat roller. You can get burnt. If a sheet of
paper is wrapped around the heat roller, do not try to remove it yourself to avoid injuries or
burns. Switch Off the machine immediately, and wait until it cools down.

Do not use conductive paper, e.g. folding paper, carbon paper and coated paper. When a
paper jam occurs, they can cause a short circuit and fire.

Do not place any heavy object on the machine. An off-balance machine can tip-over, or the
heavy object can fall, causing damage and/or injuries.

Keep the room ventilated when using the machine for an extended period of time to minimize
the ozone density in the air.

When copying with the document cover open, do not look directly at the exposure lamp.
Direct eye exposure can cause eye fatigue or eye injury.

Pull the paper trays out slowly to prevent injuries.

When removing jammed paper, make sure that no pieces of torn paper are left in the machine.
A piece of paper remaining in the machine can cause fire. If a sheet of paper is wrapped
around the heat roller, or when clearing a jammed paper that is difficult or impossible to see,
do not try to remove it by yourself. Doing so can cause injuries or burns. Switch Off the
machine immediately, and wait until it cools down.

Never heat the drum cartridge, or scratch its surface. A heated, or scratched drum can be
hazardous to your health.

Do not mix new and old batteries together, as they can burst or leak, causing a fire or 
injuries. Be sure to use the specified type of batteries only.

.

Ensure that batteries are installed with correct polarity. Incorrectly installed batteries can
burst or leak, resulting in spillage or injuries.

When clearing a paper jam or other fault, follow the appropriate procedure given in this manual.
The machine has a built-in circuit for protection against lightning-induced surge current. If lightning
strikes in your neighborhood, maintain an ample distance from the machine, and do not touch it 
until the lightning stops.
If you notice flickering, distorted images, or noises on your audio-visual units, your machine may
be causing radio interference. Switch it Off, and if the interference disappears, the machine is the
cause of the radio interference. Perform the following procedure until the interference is corrected.

Move the machine, and the TV and/or radio away from each other.
Reposition or reorient the machine, and the TV and/or radio.
Unplug the machine, TV and/or radio, and replug them into outlets operating on different circuits.
Reorient the TV and/or radio antennas, and cables until the interference stops. For an outdoor
antenna, ask your local electrician for support.
Use a coaxial cable antenna.

11

12